462-114-03380610 Anti-siphon valves are required by Federal Law and the USCG on all permanent fuel tank installation. Use 15 (Brass) calibrated for HP 200 & above and 30 (Aluminum) calibrated for HP below 200.
- Delivers Coast Guard/industry standard anti-siphon protection on all gasoline-powered boats
- Combines anti-siphon protection with a convenient hose barb design
Material: Brass, Thread: 1/4" NPT, Hose: 1/4" Barb
|
|
462-114-03380710 Anti-siphon valves are required by Federal Law and the USCG on all permanent fuel tank installation. Use 15 (Brass) calibrated for HP 200 & above and 30 (Aluminum) calibrated for HP below 200.
- Delivers Coast Guard/industry standard anti-siphon protection on all gasoline-powered boats
- Combines anti-siphon protection with a convenient hose barb design
Material: Brass, Thread: 1/4" NPT, Hose: 3/8" Barb
|
|
462-114-03380810 Anti-siphon valves are required by Federal Law and the USCG on all permanent fuel tank installation. Use 15 (Brass) calibrated for HP 200 & above and 30 (Aluminum) calibrated for HP below 200.
- Delivers Coast Guard/industry standard anti-siphon protection on all gasoline-powered boats
- Combines anti-siphon protection with a convenient hose barb design
Material: Brass, Thread: 3/8" NPT, Hose: 3/8" Barb
|
|
462-114-03576010 Converts fuel level reading from standard direct site gauge to electric dash mounted gauge (33-240 Ohms's). : Sold: Each
|
|
462-114-520027 Deluxe Replacement nozzle for 25 gallon dock walker. Description: Deluxe Nozzle, Fits: 25 Gallon Sold: Each
|
|
462-114-09908200 Flush contaminates from your lower unit cooling system. Quickly removes salt and mineral build-up with a simple flush that slips over side water inlets on most inboard and outboard lower units. Description: Dual water feed Sold: Each
|
|
462-114-09908500 Easily installs in seconds for out of the water engine flushing applications. Designed to fit inboards, performance ski boats and all boats with a thru hull intake. No more trying to fit between the trailer bunks and secure a pole to the ground. A few quick turns of the locking nut and the flusher is secure and ready to use. Stainless steel T fitting and 360 degree plastic support ring for a quick fit. Description: Motor Flusher-Pro Inboard Sold: Each
|
|
462-114-30599410 "EPA/CARB COMPLIANT
- 2-stage fuel cap is required on all portable fuel tanks. A portable fuel tank is designated as 12-gallon fuel capacity and less.
- Audible 'Click" signals cap is sealed on the neck fill
- Tether secures cap to fuel tank while refueling
- Auto "Self-Venting" pressure feature vents tank at 5 PSI (Min) when center pup-up vent is in open position
- Manual momentary pressure relief valve relieves tank pressure prior to cap removal for refueling or connecting/disconnecting fuel line assembly
- Positive vent closure for storage and transportation, designed to override of the automatic "self venting" and manual momentary pressure relief function
"" EPA/CARB COMPLIANT2-stage fuel cap is required on all portable fuel tanks. A portable fuel tank is designated as 12-gallon fuel capacity and less. Audible "Click" signals cap is sealed on the neck fill and a tether secures cap to fuel tank while refueling. An auto "Self-Venting" pressure feature vents tank at 5 PSI (Min) when center pup-up vent is in open position. Manual momentary pressure relief valve relieves tank pressure prior to cap removal for refueling or connecting/disconnecting fuel line assembly. Positive vent closure for storage and transportation, designed to override of the automatic "self venting" and manual momentary pressure relief function" : Sold: Each
|
|
462-114-63502210 Flexible fuel pickups make installation a cinch. No need to cut for smaller tanks. Size: 36"
|
|
462-114-035330 Exclusively designed to handle larger fluid extraction applications. Dual action vacuum pump works on the upstroke and the downstroke for faster extraction and works on both warm or cold oil. Automatic shut-off float eliminates overflow. Easy-pour spout has a tethered cap. Includes thread-on extraction tube & garden hose adapter kit. Not for use with gasoline. Capacity: 5 Liter Sold: Each
|
|
462-114-035340 Exclusively designed to handle larger fluid extraction applications. Dual action vacuum pump works on the upstroke and the downstroke for faster extraction and works on both warm or cold oil. Automatic shut-off float eliminates overflow. Easy-pour spout has a tethered cap. Includes thread-on extraction tube & garden hose adapter kit. Not for use with gasoline. Capacity: 7 Liter Sold: Each
|
|
462-114-03310012 12" Poplock fuel pick-up
- Aluminum fitting
- 3/8" I.D. Nylon tubing is chemical resistant
- OEM replacement
- Tube can be cut to length
|
|
462-114-03310024 24" Poplock fuel pick-up
- Aluminum fitting
- 3/8" I.D. Nylon tubing is chemical resistant
- OEM replacement
- Tube can be cut to length
|
|
462-114-03350012 12" Threaded fuel pick-up
- Aluminum fitting
- 3/8" I.D. Nylon tubing is chemical resistant
- OEM replacement
- Tube can be cut to length
|
|
462-114-630012LP EPA/CARB COMPLIANT.
The low profile and seamless one-piece construction make these tanks easy-to-carry and easy-to-store. A reserve fuel area is designed right into the tank by means of a partitioned bottom. When the gauge registers empty, simply tilt the tank and the reserve fuel supply becomes available. 90° fuel withdrawal assembly and a direct sight fuel gauge with glass lens for years of clear viewing. Moeller Marine EPA/CARB compliant portable fuel tanks are manufactured from high-density polyethylene with ultraviolet inhibitors. Advanced manufacturing techniques provide the highest quality product components available and meet the new "low permeation" standards put in place. All our portable tanks 12 gallon and under meet current United States Coast Guard, and ABYC standards.
Type: High Profile, Size: 22.9"L x 14.3"W x 13.6" H with cap
|
|
462-114-630013LP EPA/CARB COMPLIANT.
The low profile and seamless one-piece construction make these tanks easy-to-carry and easy-to-store. A reserve fuel area is designed right into the tank by means of a partitioned bottom. When the gauge registers empty, simply tilt the tank and the reserve fuel supply becomes available. 90° fuel withdrawal assembly and a direct sight fuel gauge with glass lens for years of clear viewing. Moeller Marine EPA/CARB compliant portable fuel tanks are manufactured from high-density polyethylene with ultraviolet inhibitors. Advanced manufacturing techniques provide the highest quality product components available and meet the new "low permeation" standards put in place. All our portable tanks 12 gallon and under meet current United States Coast Guard, and ABYC standards.
Type: Low Profile, Size: 24.3"L x 18.1" W x 10.75" H with cap
|
|
462-114-620003LP "EPA/CARB COMPLIANT.
Ultra tanks include our new 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks and a direct sight fuel gauge with glass lens for years of clear viewing. Seamless one-piece polyethylene construction, 2-stage self-venting fuel cap and advanced styling make these a perfect portable fuel tank for storage in transom well or in other small areas. Moeller Marine EPA/CARB compliant portable fuel tanks are manufactured from high-density polyethylene with ultraviolet inhibitors. Advanced manufacturing techniques provide the highest quality product components available and meet the new "low permeation" standards put in place. All our portable tanks 12 gallon and under meet current United States Coast Guard, and ABYC standards." Gals.: 3, Size: 16.75" L x 10.75" W x 8" H w/Cap" Sold: Each
|
|
462-114-620040LP "EPA/CARB COMPLIANT.
Unique design allows for easy storage in the bow of inflatable's and dinghies. Moves the weight of the fuel up front and helps the boat plane quicker. The 6BOW is a lightweight, durable, and easy-to-carry portable fuel tank. Includes the new 2-stage self-venting fuel cap. Moeller Marine EPA/CARB compliant portable fuel tanks are manufactured from high-density polyethylene with ultraviolet inhibitors. Advanced manufacturing techniques provide the highest quality product components available and meet the new "low permeation" standards put in place. All our portable tanks 12 gallon and under meet current United States Coast Guard, and ABYC standards." Gals.: 6, Size: "Rear - 19-1/2" L x 16" W
Front - 12" H x 6-1/2" W with cap" Sold: Each
|
|
462-114-620049LP "EPA/CARB COMPLIANT.
Ultra tanks include our new 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks and a direct sight fuel gauge with glass lens for years of clear viewing. Seamless one-piece polyethylene construction, 2-stage self-venting fuel cap and advanced styling make these a perfect portable fuel tank for storage in transom well or in other small areas. Moeller Marine EPA/CARB compliant portable fuel tanks are manufactured from high-density polyethylene with ultraviolet inhibitors. Advanced manufacturing techniques provide the highest quality product components available and meet the new "low permeation" standards put in place. All our portable tanks 12 gallon and under meet current United States Coast Guard, and ABYC standards." Gals.: 6, Size: 20.5" L x 12.75 W x 10.5" H w/Cap" Sold: Each
|
|
462-114-09907600 Flush contaminates from your lower unit cooling system. Quickly removes salt and mineral build-up with a simple flush that slips over side water inlets on most inboard and outboard lower units. Description: Universal Sold: Each
|
|
