Generic

250 TBS Intercooler

250TBS SuperChiller Intercooler.If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.

"Integrated circuit breaker
Works in case of power loss with supplied manual override crank handle
Gloss black painted outer tube and motor assembly, clear zinc inner tube
8.50" Retracted - 28.50" Extended
Limited 1 year warranty"

• Integrated circuit breaker


• Works in case of power loss with supplied manual override crank handle


• Gloss black painted outer tube and motor assembly, clear zinc inner tube


• 8-1/2" Retracted - 28-1/2" Extended


• Limited 1 year warranty

Travel: 18", Max Load: 2,500 lb.

Sold: Each

"The fixed mount jack with drop leg is suited for the heavy-duty applications. This square tube jack fits trailer frames up to 3" x 5". Bolt on style and includes all mounting hardware."

Max Load: 2,500 lbs.

Sold: Each

256 Weiand Intercooler

256 SuperChiller Intercooler, Holley/Weiand. If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.

"Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems."

Length: 26', Box: 2

Sold: Box

"Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems."

Length: 28', Box: 2

Sold: Box

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing SeaStar hydraulic steering systems. Design incorporates a TeleFlex Extreme cable as the linkage between the two engines.

Features:
• Flexible cable allows for adjustable locations of kicker motor
• Allows independent trim/tilt and full steering stroke
• Retro-fittable to most SeaStar Front Mount Cylinders
• 20 hp rating (uses 40 series Xtreme cable)
• Length: 28"

Size: 6" x 22", Color: White, Boat Size: 20'-25', Pack: 2

Sold: Pack

Switch panel that gives full control of your equipment. Just push the button to pump the bilge. Matte black finish panel has an integrated fuse holder and operating light. Fuses included.

Positions: On/Off, Volts: 12 or 24, Size: 3" x 2-1/8" x 1-1/2" D

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 2" x 1-1/2"

"Model RP325: End cap 3" for RP33 & RP335
Model RP32: End cap 3-1/4" for RP-8, 10, 12 & 18"

Description: End cap for RP8, RP10, RP12, RP18, Size: 3-1/4", Hole: 5/8", Case: 36

Sold: Each

Formed 316 stainless steel.

A: 5/16", B: 3-1/8", C: 7/16", D: 3/8", Pkg.: Card

Sold: Each

A: 5/16" , B: 3-1/8" , C: 7/16" , D: 3/8" , Pkg.: Bulk

Features Shakespeare's exclusive distributive load for super signal pulling power. The coil is permanently sealed in white fiberglass. Includes coax cable with Motorola plug.

Length: 39", Description: Nylon ferrule for standard mounts, Cable: 10'

Wireless remote kit allows wireless remote operation (Up/Down) of any Lewmar or Simpson Lawrence (solenoid switched) windlass. Easily retrofits existing installations to any windlass or thruster with a dual direction solenoid. The floating FOBs operate with 2 AAA alkaline batteries, the receiver connects to any ships power from 10-30Vdc and will operate up to 8 remote key fobs. FCC & CE approved.

Kit includes: one wireless FOB and one receiver.

"Chrome plated zinc. Padlock eye swivels to act as latch. Padlock clearance is 11/32". Screw size is 6."

Size: 3" x 1" Hasp"

Sold: Each

"Model RP325: End cap 3" for RP33 & RP335
Model RP32: End cap 3-1/4" for RP-8, 10, 12 & 18"

Description: End cap for RP33 & RP335, Size: 3", Hole: 1/2", Case: 80

Sold: Each

Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels. Use where sealing is more important than adhesion

Size: 3 oz. Tube, Case: 24

Sold: Each

Ignition Switch 3 Position w/Cap

The Seadog Three Position Ignition Switches have a brass construction with a long type shaft.

• Action: Off-Ignition-Start
• Shaft diameter: 13/16"
• Shaft type: Long
• Maximum panel: 1-1/8"
• Terminal type/#: Screw/3

Ignition Switch 3 Position Short Shaft

The Seadog Three Position Ignition Switches have a polypropylene construction.

• Shaft diameter: 13/16"
• Maximum panel: 5/8"
• Terminal type: Screw - #3
• Color: Black