Generic

"50 Amp, 125/250 Volt. Nickel plated brass. Heat resistant thermoset interior and combination metal and rubber cord grip, which provides superior strain relief capability. Cord grip range is .44-1.140"."

Description: Plug, Rating: 50A, 125/250V

Sold: Each

Malleable Snap Hook 3-7/16"

The Seadog Malleable Utility Snap has a cast malleable steel construction with a nickel plated finish.

• Size: (A) 3-7/16" (B) 1/2" (C) 11/16"

Nickel plated steel.

A: 3-7/16", B: 1/2", C: 11/16", Pkg.: Card

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Crusader 97992, 97114, Application: Starboard, GM big block V8, 454 cid (models CH350 & 454XL).
Use with gasket 0418, mounting kit 8524

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Barr# CHV-1-83, Application: Port & Starboard, Universal center riser manifold. Fits Chris-Craft 283, 305, 307 and 350 CID engines.
Crusader 283 and 327 CID engines (up to '64) and 305, 307 and 350 CID engines ('65 & Newer).
Mercury 190, 198, 225, 250, 270, 228, 898, 260, 255 and 280 models.
OMC 283, 305, 307 and 350 CID engines ('68-'80). Volvo 307 and 350 CID engines.

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Marine Power 0994-100, Application: Center-Rise Port & Starboard fits most Marine Power GM 5.0L, 5.7L & 6.2L V-8 Enpac models (gaskets included).
Use mounting kit 8520

Sold: Each

Manifold End Plates

Replaces: Crusader 97296, Application: Crusader Stainless steel - small block V8, 305-350 cid (models 220 & 270), GM big block V8, 454 cid (models CH350 & 454XL). Use with gasket 0309, 0305

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Mercruiser 99746A8, A17, Application: Port & Starboard - most 4.3L, 262 CID V6 applications (mounting package included).
Uses mounting kit 8533

Sold: Each

Manifold Riser Spacer

Replaces: 0, Application: Chris-Craft, Crusader, Universal, Mercruiser & Volvo. Barr, Indmar and Marine Power Ford small block V8, 302-351 cid, GM small block V8 305-350 cid, GM big block C8, 454 cid. Use with manifold 19981, 19971, 1898

Sold: Each

Manifold Riser Spacer

Application: Mercruiser GM V6 229 and 262 CID (models 185 and 205), GM small block V8, 305-350 CID (models 200, 228, 230, 260 and 898), GM big block V8, 454 CID (models 330, 340 and 7.4L). Use with manifold 19521, 19531, 19571

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: OMC Sterndrive/Cobra 912441, Application: V8 Starboard Side - most GM V8 small blocks with end riser.
Uses mounting kit 8502

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Volvo 3857656, 8847499, Application: 4.3L V6

Sold: Each

Sierra manifolds are painted, packaged and leak tested.

Replaces: Volvo 835804, 856883, Application: Port & Starboard, AQ200D, 200F, 225D, 225E, 225F, 255B, 260A, 271A, 280A, 290A,
311A, AQ500, 570, BB225, 225AV, 225B, 260A, 260AV, 260B, 260C (mounting package included).
Uses mounting kit 8511

Sold: Each

Our all-new Pro Series Billet Aluminum Rocker Arms are engineered for top performance across street, strip, and track applications. Machined from high-quality 2024 billet aluminum extrusions, these rockers feature precision-ground needle and cage bearings, reducing friction with full complement needle bearings. With the heat-treated and polished steel nose rollers, axles, and trunions, wear is minimized for lasting durability. An anodized finish enhances protection, and each 16-piece set comes complete with Poly Locks for secure installation.

• CNC-Machined from 2024 Billet Aluminum
• Anodized Finish for Increased Durability Under Extreme Heat Conditions
• Shot-Peened to Increase Strength & Reduce Stress Risers
• Heat-treated and Polished Steel Axles Have a 60-62 Rockwell Hardness
• Rated at 750lbs Open Spring Pressure
• Multiple Oil Channels for Pushrod and Valve Tip Lubrication
• Poly Locks Included for Secure Installation

Our all-new Pro Series Billet Aluminum Rocker Arms are engineered for top performance across street, strip, and track applications. Machined from high-quality 2024 billet aluminum extrusions, these rockers feature precision-ground needle and cage bearings, reducing friction with full complement needle bearings. With the heat-treated and polished steel nose rollers, axles, and trunions, wear is minimized for lasting durability. An anodized finish enhances protection, and each 16-piece set comes complete with Poly Locks for secure installation.

• CNC-Machined from 2024 Billet Aluminum
• Anodized Finish for Increased Durability Under Extreme Heat Conditions
• Shot-Peened to Increase Strength & Reduce Stress Risers
• Heat-treated and Polished Steel Axles Have a 60-62 Rockwell Hardness
• Rated at 750lbs Open Spring Pressure
• Multiple Oil Channels for Pushrod and Valve Tip Lubrication
• Poly Locks Included for Secure Installation

"One Piece Manual Features:

• Made of 6061 T6 extruded aluminum alloy


• Stainless steel fasteners for maximum strength and durability


• Centrally located adjustment screw for positive alignment


• 5 Vertical adjustment


• Designed to fit standard B.I.A. bolt pattern


• Rated for up to V6 outboards"

• Made of 6061 T6 extruded aluminum alloy


• Stainless steel fasteners for maximum strength and durability


• Centrally located adjustment screw for positive alignment


• 5-1/2" & 10" set backs from transom are available


• 5" Vertical adjustment


• Designed to fit standard B.I.A. bolt pattern


• Rated for up to V6 outboards

Setback: 10"

Sold: Each

"The 2-piece adjustable jack has 5" of slot adjustment at the motor mounting bracket and 1-1/2" of adjustment at the transom bracket. Made of 6061 T6 extruded aluminum alloy. Stainless steel fasteners for maximum strength and durability. Designed to fit standard B.I.A. bolt pattern without drill holes or making modifications in the boat or motor. Rated up thru V-6 motors."

Description: Two piece manual jack plate, Setback: 4"

Sold: Each

• Toilet waste pump is made of high quality ABS plastic. Lightweight. Can be mounted in various orientations/positions
• Large non-choke valves. Tough plastic housing keeps in nasty smells. Easy to clean (no tools required)
• 14-3/4" gals per minute
• 1-1/2" inlet/outlet
• Max lift and max head of 15 ft.
• Mount: Bulkhead

Size: 30 cc syringe

Sold: Each

Size: 4 oz. jar

Sold: Each