137-9303 Replacement fitting used in Marine Machine and Latham steering kits.
Size: -6 Male
|
|
462-1-HT5097 "3/8" nylon tubing. Recommended for SeaStar I sterndrive, seadrive and inboard systems only. Do not use on outboard systems. Not recommended for use with any 2.0 or 2.4 helm pumps." Length: 75' Sold: Each
|
|
462-88-8061120 Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant. Type: Hose Tee, Hose: 1-1/2", Thread: N/A Sold: Each
|
|
462-354-337350 Injection molded ABS. Works in conjunction with Flush Thru-Vent part numbers, 337326, 337316 and 337376. A: 2-3/4", B: 3", C: 2-13/16", D: 3-5/8" Sold: Each
|
|
462-88-3370383 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 3/8", Length: 10' Sold: Each
|
|
462-88-3370380 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 3/8", Length: 250' Sold: Each
|
|
462-88-3370386 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 3/8", Length: 50' Sold: Each
|
|
462-88-3370385 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 3/8", Length: 25' Sold: Each
|
|
462-88-3370563 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 5/16", Length: 10' Sold: Each
|
|
462-88-3370565 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 5/16", Length: 25' Sold: Each
|
|
462-88-3370560 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 5/16", Length: 250' Sold: Each
|
|
462-88-3370566 Silverado 4000 fuel line is constructed with a non-permeable THV barrier layer, polyester reinforcement, and a CPE weather and UV resistant cover. It meets all current EPA and CARB standards. The THV 500 barrier layer is designed for excellent flexibility and permeation resistance. The polyester reinforcement adds strength to the hose. CPE cover is excellent for UV resistance and the gray color keeps the hose cooler to help prevent vapor lock. Features: Extremely low permeation, EPA/CARB certified outboard fuel line, for use in above deck primer bulb assemblies, can be used for small diesel feed line, resistant to ethanol blend fuels. Meets SAE J1527 Type B1-15.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. ID: 5/16", Length: 50' Sold: Each
|
|
462-232-HF1DP Improves throttle control for outboards and inboards. A stainless steel spring returns engine to idle position when released. Uses standard control cables for easy hook-up. Description: Universal Improves throttle control for outboards and inboards. A stainless steel spring returns engine to idle position when released. Uses standard control cables for easy hook-up.Slide Mount: Allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with drivers in all sizes. Aluminum and stainless.
|
|
462-232-HF1TDP Combines safety and performance with style and function. It's the ultimate upgrade for the boater looking for safety and performance. Top loading throttle cable makes it easier to install and gives more foot and leg room.Optional Slide Mount: Allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with drivers in all sizes. Aluminum and stainless. Description: OMC/Mercury Combines safety and performance with style and function. It's the ultimate upgrade for the boater looking for safety and performance. Top loading throttle cable makes it easier to install and gives more foot and leg room.Slide Mount: Allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with drivers in all sizes. Aluminum and stainless.
|
|
462-232-HF1CTDP Combines safety and performance with style and function. It's the ultimate upgrade for the boater looking for safety and performance. Top loading throttle cable makes it easier to install and gives more foot and leg room.Optional Slide Mount: Allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with drivers in all sizes. Aluminum and stainless. Description: Honda, Yamaha, & Chrysler Combines safety and performance with style and function. It's the ultimate upgrade for the boater looking for safety and performance. Top loading throttle cable makes it easier to install and gives more foot and leg room.Slide Mount: Allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with drivers in all sizes. Aluminum and stainless.
|
|
462-491-10319058 Hot dip galvanized anchor type shackle. Easily identifiable copper colored pin. Proof tested & load rated. Bulk packed. Size: 1", Max Load: 18700
|
|
462-491-10319054 Hot dip galvanized anchor type shackle. Easily identifiable copper colored pin. Proof tested & load rated. Bulk packed. Size: 1/2", Max Load: 4400
|
|
462-491-10319050 Hot dip galvanized anchor type shackle. Easily identifiable copper colored pin. Proof tested & load rated. Bulk packed. Size: 1/4", Max Load: 1100
|
|
462-491-10319060 Hot dip galvanized anchor type shackle. Easily identifiable copper colored pin. Proof tested & load rated. Bulk packed. Size: 1-1/4", Max Load: 29700
|
|
462-491-10319059 Hot dip galvanized anchor type shackle. Easily identifiable copper colored pin. Proof tested & load rated. Bulk packed. Size: 1-1/8", Max Load: 20900
|
|
