462-1-HA5450 "Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube." Description: For Capilano Systems Sold: Kit
|
|
462-23-66009L6 Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners. Size: 6" L x 1-1/4" H , Material: 316 Stainless, Fastener: 1/4"
|
|
462-23-66010L3 Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners. Size: 8" L x 1-1/2" H , Material: 316 Stainless, Fastener: 1/4"
|
|
462-11-MP39260 Black rudder boots to seal out dirt and moisture on push button switches.
Description: Boot Nut with Chrome Face Nut
Sold: Each
|
|
462-38-28664W White nylon. Size: 1/2" x 3/8"
|
|
462-38-28680W White nylon. Size: 1-1/2" x 1-1/4"
|
|
462-38-28675W White nylon. Size: 1-1/4" x 1"
|
|
462-38-28671W White nylon. Size: 1" x 1/2"
|
|
462-38-28672W White nylon. Size: 1" x 3/4"
|
|
462-38-44530 Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" x 1-1/4"
|
|
462-38-28668W White nylon. Size: 3/4" x 1/2"
|
|
462-38-28661W White nylon. Size: 3/8" x 1/4"
|
|
462-639-703050 Uses revolving dies to create a hex style crimp.
Wire Range: 6 - 1/0
|
|
160-50-0056-02 Hi-Flow Nozzle Plug Assembly
|
|
462-69-12VBRAD Allows 6-gauge wire connection to ConnectPro receptacle. This adapter has corrosion resistant, plated brass electrical components and is easy to install. For use with 12VBR.
|
|
462-686-2306F Injection molded high density polyethylene and U.V. stabilized. Length: 6" , Material: Black Plastic
|
|
462-622-15048101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 14"L x 12"W, Boat Size: 16'-32', Actuator: Single, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-622-15049101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 18"L x 12"W, Boat Size: 20'-40', Actuator: Single, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-622-15051101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 25"L x 14"W, Boat Size: 28'-46, Actuator: Dual, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-57-70200 Fits: Ford 302 & 351 ci engines
- Permanent magnet
- Gear-reduction starter
- 12 Volt
- Kit includes wiring harness to replace conventional starter
- Clockwise rotation
Fits: Ford 302 & 351 ci engines- Permanent magnet
- Gear-reduction starter
- 12 Volt
- Kit includes wiring harness to replace conventional starter
Description: New, Rotation: CW Sold: Each
|
|
