462-34-SPO60N12V "Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 7.0 for water - 4.5 for oil (Non-Reversing), Volts: 12
|
|
462-34-SPO60R12V "Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 7.0 for water - 4.5 for oil (Reversing), Volts: 12
|
|
462-34-SSC2000 Allows instant emergency bilge pumping, or to simplify winterization and cooling system flushing. While the engine is running, close the seacock and remove the quick release plug. Includes service adaptor. Hose: 2" I.D.", Pipe: 2" NPT", Length: 5.20" Sold: Each
|
|
462-34-STH1000W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1", A: 2.85", B: 1.05", C: 4.00", D: 3.05"
|
|
462-34-STH1250W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1 1/4", A: 2.90", B: 1.20", C: 4.30", D: 3.35"
|
|
462-34-STH1500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1 1/2", A: 3.15", B: 1.30", C: 4.38", D: 3.50"
|
|
462-34-STH2000W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 2", A: 3.60", B: 1.50", C: 5.75", D: 4.00"
|
|
462-34-STH2500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 2 1/2", A: 3.20", B: 2.25", C: 7.85", D: 5.85"
|
|
462-34-STH500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1/2", A: 2.20", B: 1.05", C: 3.28", D: 2.55"
|
|
462-34-STH750W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 3/4", A: 2.20", B: 1.05", C: 4.00", D: 3.05"
|
|
462-34-SA1 Groco service kit for SA500 and SA750 strainers. Includes (2) #9R gaskets, S-64-A gasket and 500-K washer Fits: SA-500 & 750 Sold: Each
|
|
462-34-SA2 Groco service kit for SA1000 and SA1250 strainers. Includes (2) #8R gaskets, S-751-A gasket and 500-K washer. Fits: SA-1000 & 1250 Sold: Each
|
|
462-34-SA3 Groco service kit for SA1500 thru SA3000 strainers. Includes (2) #10R gaskets, S-86-A gasket and 504-F washer. Fits: SA-1500, 2000, 2500 & 3000 Sold: Each
|
|
462-34-SW2531 "Services deck plates or strainer caps with key holes up to 7" apart. Pins fit holes up to 5/16"."
Description: Spanner Wrench
Sold: Each
|
|
462-34-TH1000W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1", A: 2.85", B: 0.30", C: 2.32" Sold: Each
|
|
462-34-TH1250W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1 1/4", A: 2.90", B: 0.30", C: 2.62" Sold: Each
|
|
462-34-TH500W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1/2", A: 2.20", B: 0.30", C: 1.70" Sold: Each
|
|
462-34-TH750W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 3/4", A: 2.20", B: 0.30", C: 1.90" Sold: Each
|
|
462-34-TH2500W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 2 1/2", A: 3.56", B: 0.42", C: 4.40" Sold: Each
|
|
462-34-TH3000W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 3", A: 4.00", B: 0.42", C: 5.50" Sold: Each
|
|
