Generic

"EPA/CARB COMPLIANT
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Universal, Rating: B1-15, Size: 5/16" ID x 80" L"

Sold: Each

• 1/8" NPT fuel pressure gauge fitting
• 3/8" Hose connection
• Anodized aluminum

Fuel Pump - Johnson/Evinrude

Description: Fits: 6/8/9.9/15 hp (1992 & Up) , Replaces: 397839, 391638, 395091, 397274

Sold: Each

Fuel Pump - Johnson/Evinrude

Description: Fits: 25-55 hp (1976-89), non-VRO , Replaces: 438556, 382354, 385781, 388268, 394543, 395713, 398338, 398387, 432451, 433387

Sold: Each

Contains Gasket(rear), diaphragm (rear), gasket (front/top) diaphragm (front/top)

Fits: V4-V6, OEM #: 6E5-24411-00-00

Sold: Bag

For Cool Fuel Supply Module Pump Kit, Complete with Drain Port Gen III. This Cool Fuel module has improved hose connections and replaces the original and newer versions of the Gen III Cool Fuel module. The difference in designs are the connections for the cooling water hoses. Threaded hose barb fittings are supplied with the new fuel module.

For use on some early applications, the cooling water hoses and various fittings must be replaced, additional OEM parts may be needed when replacing the original production Gen III Cool Fuel modules.

Replaces Manufacturer Part Numbers：8M0047215, 864650A13, 864650A05

Fits Most of the following with the cooling water hoses attaching to stud on module:

• Mercruiser 350 Mag MPI Alpha/Bravo
• Mercruiser 350 Mag MPI Horizon Alpha/Bravo & EC
• Mercruiser 350 Mag MPI Horizon MIE
• Mercruiser 350 Mag MPI MIE
• Mercruiser 377 Mag MPI Alpha/Bravo EC
• Mercruiser 377 Mag MPI Bravo
• Mercruiser 496 Mag Base & H.O.
• Mercruiser 496 Mag EC Base & H.O.
• Mercruiser 5.0L MPI Alpha/Bravo & EC
• Mercruiser 5.7L MPI Horizon MIE
• Mercruiser 5.7L MPI MIE & EC
• Mercruiser 5.7L SKI EC
• Mercruiser 6.2L MPI Horizon MIE & EC
• Mercruiser 8.1L Inboard Base, EC & H.O.
• Mercruiser 8.1L Towsport Base
• Mercruiser MX 6.2L MPI Bravo
• Mercruiser MX 6.2L MPI Horizon Bravo
• Mercruiser MX 6.2L MPI Horizon MIE
• Mercruiser MX 6.2L MPI MIE
• Mercruiser Scorpion 350 EC
• Mercruiser Scorpion 377 HO EC

Fuel Pump Relay, Crusader

Replaces: R130012, Application: For Fuel Pump on Crusader MEFI systems

Sold: Each

Fuel Pump Yamaha #66K-13907-00

Replaces: 66K-13907-00

Sold: Each

Fuel Pump Yamaha #68F-13907-00

Replaces: 68F-13907-00, 68F-13907-01

Sold: Each

Fuel Pump Yamaha #68V-13907-00

Replaces: 68V-13907-00, 68V-13907-03

Sold: Each

Connector: Tank Fitting - Male, Fits: 88896, Material: Machined brass, Thread: 1/4" NPT, Hose: -, OEM #: OMC 502867

Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.
LP = Low Permeation

Connector: Tank Fitting - Male, Fits: 88966, Material: Machined brass, Thread: 1/4" NPT", Hose: 0, OEM #: Yamaha 6Y1-24305-04

Sold: Each

"This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware."

Length: 62"

Sold: Pack

"Replace aging fuel tanks and maximize your fuel capacity space with a Moeller below-deck, permanent tank. Tank system installation kit contains all the parts to install the fuel-fill and through-hull ventilation system. Includes deck fill, hose clamps, chrome/brass thru-hull vent, 1-1/2" fuel fill hose, and 25" of 5/8" vent hose with 5/8" brass hose barb."

Description: Permanent Fuel Tank Installation Kit

Sold: Each

"Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS)."

Size: 1 oz

Sold: Each

Compact bracket and separator kit for outboards up to 115hp with 10 micron.

Contains: Bracket: 7774/Filter: 7865, Replaces: Yamaha MAR-MINIF-LT-AS

Sold: Each

Fuel/Water Separator Assembly

Contains: High Capacity Filter.
Replaces Volvo 3847644

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Johnson/Evinrude, Rating: B1-15

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Mercury, ('98 & Newer), Rating: B1-15

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Mercury, Rating: B1-15

Sold: Each