421-08-100600001 1/4" Flat Washer AN
1/4" Flat Washer AN
2 per Gimbal Housing Assembly
|
|
421-08-170600001 1/4" Lock Washer SS
1/4" Lock Washer SS (For Socket Head Cap Screw)
2 per Gimbal Housing Assembly
|
|
421-08-010604112 1/4-20 x 1 3/4" Hex Head Bolt
1/4-20 x 1 3/4" Hex Head Bolt
2 per Gimbal Housing Assembly
|
|
421-08-060604072 Allen Bolt
1/4-20 x 7/8" Allen Bolt Armer Coat Steel
2 per Gimbal Housing Assembly
|
|
421-04-6090 Transom Mount Water Pickup-10 male fitting Cut to length pickup, is ideal for inner coolers. Mounts to the transom by 3 screws (not included).
|
|
421-08-040403041 10-24 x 1/2" Button Head Allen S/S
10-24 x 1/2" Button Head Allen S/S
2 per Gimbal Housing Assembly
|
|
421-08-010403051 10-24 x 5/8" Hex Head S/S
10-24 x 5/8" Hex Head S/S
2 per Gimbal Housing Assembly
|
|
421-01-8057 1-1/2" SCX4 Drive Spacer
| Qty |
Description |
| 1 |
Spacer 1 1/2" |
| 1 |
SCX/SCX4 Coupler + 1 1/2" |
| 1 |
SCX/SCX4 Alignment Spacer |
| 6 |
7/16-20/14 x 3 1/2" S/S Stud |
| 2 |
7/16-20/14 x3 5/8" S/S Stud |
| 8 |
7/16-20 Nylock Nuts S/S |
| 8 |
7/16 AN Washers |
| 1 |
"O" Ring (Cooling Water Passage) |
| 1 |
"O" Ring (Oil Passage) |
| 1 |
"O" Ring (Water Passage) |
| 1 |
"O" Ring (Alignment spacer) |
| 1 |
Loctite |
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-04-6040 Water Pickup
To view and download the PDF dimension sheet CLICK HERE 1 1/4" push-on, adjustable pickup. Just loosen the two bolts to adjust for any amount of pressure. Designed to mount to the transom with 4 screws (not included).
|
|
421-04-6060 Ballast Tank Pickup.1 1/4" push-on Ballast tank pickup. Designed for use where a ballast tank is needed. Can be cable operated with a 33C cable or equivalent.
|
|
421-04-6020 Offshore Water Pickup
To view and download the PDF instruction sheet CLICK HERE 1 1/4" push-on is a transom mount offshore design pickup. This bolts to the transom with 4 screws (not included), designed to mount no lower than a 1/4" below the bottom of the boat.
|
|
421-01-2119 Prop Adaptor1 1/4" Mercury Prop Adaptor
|
|
421-04-6080 Transom Mount Water Pickup1 1/4" push-on cut to length pickup. This transom mounted pickup can be cut to fit
various location. Attaches with 3 screws (not included).
|
|
421-11-1020 Silicon Gasket Sheet12" x 12" Silicon gasket sheet
|
|
421-04-6030 Adjustable Water Pickup
To view and download the PDF dimension sheet CLICK HERE -16 male fitting, Adjustable pickup. Just loosen the two bolts to adjust for any amount of pressure. Designed to mount to the transom with 4 screws (not included).
|
|
421-04-6050 Ballast Tank Pickup.-16 male fitting Ballast tank pickup. Designed for use where a ballast tank is needed. Can be cable operated with a 33C cable or equivalent.
|
|
421-04-6010 Offshore Water Pickup
To view and download the PDF dimension sheet CLICK HERE -16 male fitting is a transom mount offshore design pickup. This bolts to the transom with 4 screws (not included), designed to mount no lower than a 1/4" below the bottom of the boat.
|
|
421-04-6070 Transom Mount Water Pickup-16 male fitting cut to length pickup. This transom mounted pickup can be cut to fit various location. Attaches with 3 screws (not included).
|
|
421-04-1110 2 Port Sea Strainer (AC) 2 Port Sea Strainer (AC)
IMCO's sea strainer are the strongest available on the market. Our stainless steel cans are investment cast for strength. Our brackets are unique in design. Machined out of 386 aluminum and polished. The mounting bracket bolts together with 2 stainless steel allen bolts, capturing the can, o-ring seal, and the 3/4" plexi-glass top in one clean and simple operation without stress on the glass. Our perforated screen works as grater to reduce debris into fine particles. IMCO's strainer are 6 1/4" in diameter, 5" deep, and can be order in any depth for offshore use. All strainers are made to order. This 4 port strainer can be ordered with 1 1/4" hose barbs, 1" NPT female fittings, 3/4" NPT female fittings, -16 male fittings or any combination of fittings.
|
|
421-04-1115 2 Port Sea Strainer (AD)2 Port Sea Strainer (AD)
IMCO's sea strainer are the strongest available on the market. Our stainless steel cans are investment cast for strength. Our brackets are unique in design. Machined out of 386 aluminum and polished. The mounting bracket bolts together with 2 stainless steel allen bolts, capturing the can, o-ring seal, and the 3/4" plexi-glass top in one clean and simple operation without stress on the glass. Our perforated screen works as grater to reduce debris into fine particles. IMCO's strainer are 6 1/4" in diameter, 5" deep, and can be ordered in any depth for offshore use. All strainers are made to order. This 4 port strainer can be order with 1 1/4" hose barbs, 1" NPT female fittings, 3/4" NPT female fittings, -16 male fittings or any combination of fittings.
|
|
