Serial 0B721206 Thru 0D805068 - Diesel Engines

Adaptor / Valve Spring Compressor 91-883845

Use in combination with typical valve spring compressor to compress valve spring.

Aligner 91-883859

Aligns the cylinder block to the oil pan upper.

Compression Tool Adaptor 91-881737

Adapts the compression tester to the VM direct injection engines.

Compressor 91-883850

Valve compressor to adjust the valve clearance.

Crankcase Orifice Restrictor 91-854270

Used to measure crankcase pressure on D7.3L IDI engines and D7.3L D-Tronic engine.

Crankshaft Gear Puller 91-801333503

Removes the crankshaft gear.

Crankshaft Pulley Puller 91-801763590

Removes the pulley from the crankshaft.

Front Main Bearing and Camshaft Bearing Puller 91-801333508

Removes and installs the camshaft bearings and the front main bearings.

Injector Installer Tool 91-854265

Use on the 7.3L D-Tronic to install the injector into the cylinder head.

Injector Remover Tool 91-854264

Use to remove the injector from the cylinder head on the D3.7L D-Tronic engines.

Installer / Oil Seal 91-883855

Installs the camshaft oil seal.

Installer / Valve Stem Seal 91-883854

Installs the valve stem seal.

Installer Oil Jet 91-883860

Positions and installs the oil jet pipe to the cylinder block.

Installer Oil Pump 91-883849

Installs the oil pump seal in the oil pump cover.

Installer Oil Seal with Crankshaft 91-883848

Install the front crankshaft oil seal with the oil seal retainer installed.

Installer Oil Seal without Crankshaft 91-883847

Install the front crankshaft oil seal with the oil seal retainer not installed.

Locking Tool 91-883853

Removes and installs the exhaust camshaft.

Mercruiser Hand Pump 91-878375

Aluminum rotary hand pump includes bung adapter 4 ft. polyethylene discharge hose and two piece steel suction pipe. For use with gasoline diesel and similar light petroleum products including 2 and 4 cycle oils.

Orificed Restrictor Adaptor 91-854271

Required on all D-Tronic D7.3L engines only.

Remover / Drive Pulley 91-883844

Removes the injection pump drive pulley.