Batteries & Accessories - Circuit Breakers & Fuse Holders

AGC Fuses 15-Amp (5/Set)
Your Price:
$3.99

AGC Fuses 15-Amp (5/Set)

464-444115-1

AGC Fuses 15 Amp (5/Set)

The Seadog Glass Tube Fuses have a nickel plated brass and glass construction.

  • Type: AGC
  • Size: 1/4" diameter x 1-1/4" length
  • Fuses per set: 5

AGC Fuses 20-Amp (5/Set)
Your Price:
$3.99

AGC Fuses 20-Amp (5/Set)

464-444120-1

AGC Fuses 20 Amp (5/Set)

The Seadog Glass Tube Fuses have a nickel plated brass and glass construction.

  • Type: AGC
  • Size: 1/4" diameter x 1-1/4" length
  • Fuses per set: 5

ATO/ATC Fuse Kit
Your Price:
$14.99

ATO/ATC Fuse Kit

464-445190-1

ATO/ATC Fuse Kit

Seadog ATO/ATC Style Mixed Fuse Kit contains 3, 5, 7, 10, 15 and 20 amp fuses.

  • Size: 3/4"L x 3/4"W
  • Tin plated copper and injection molded nylon construction
  • 5 each of every amp fuse

Boot Reset Button Clear 2/Pk
Your Price:
$5.99

Boot Reset Button Clear (2 Pack )

464-4135

Boot Reset Button Clear 2/Pk

Blue Sea Systems Waterproof Boot Reset Buttons replace the standard mounting nut for Blue Sea's Thermal Push Button Circuit Breakers. They protect circuit breakers in wet environments and the silicone rubber construction is UV resistant and will resist discoloration and cracking.

    Features:
  • Boot threads: 3/8"-27 nickel-plated brass
  • Two per package

Battery Terminal Fuse 50-Amp
Your Price:
$17.99

Battery Terminal Fuse 50-Amp

464-5177

Battery Terminal Fuse 50-Amp

Blue Sea Systems Terminal Fuses are Marine Rate and designed for various applications with up to 300 AMP loads. Their high interrupt rating satisfies ABYC requirements for DC main circuit protection. For ease of use, there is a window that indicates blown condition, and each amperage is color coded for easy identification.


Battery Terminal Covers 1/2"Dia
Your Price:
$6.99

Battery Terminal Covers 1/2"Dia

464-415110-1

BATTERY TERMINAL COVERS 1/2"DIA

Seadog Battery Terminal Covers are constructed of injection molded PVC and meet USCG requirements and the American Boat and Yacht Council recommendations for prevention of accidental groundings. They will fit most marine batteries and automotive batteries with add-on marine terminals. Set of 2.

    Features:
  • Size: 1-5/8"W x 2-7/8"L
  • Color: Red and black
  • Cable gauge: 4, 2, 1

Battery Clips 10a
Your Price:
$3.99

Battery Clips 10A

464-426460-1

BATTERY CLIPS 10A

The Seadog Aligator Battery Clips are stamped copper plated steel.

    Features:
  • Type: 10 Amps
  • Length: 3"

Automatic Charging Relay "ACR"
Your Price:
$116.99

Automatic Charging Relay "ACR"

464-7610

Automatic Charging Relay "ACR"

Blue Sea System SI-Series Start Isolation Automatic Charging Relay automatically isolates batteries during starting to protect sensitive electronics and manages the charging of two battery banks. The 120 AMP continuous rating supports the high-output alternators. LED light indicates when batteries are combined and blinks when the undervoltage or starting isolation feature is engaged.

    Features:
  • Side and bottom knockouts for power cable connections
  • Clip-on cover protects terminal connections
  • 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation
  • Start Isolation (SI) can be configured for temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
  • 12/24 volt auto ranging voltage input
  • Hermetically sealed contacts/vaporproof
  • Remote LED output indicates relay state away from ACR (required optional LED)
  • Senses charging on two battery banks
  • Intermittent rating: 5min. = 210 AMPS
  • Continuous rating = 120 AMPS
  • Amperage operating current = 15mA
  • Maximum cable size = 1/0 AWG
  • Amperage operating current -
  • 12 Volts DC = 175mA
  • 24 Volts DC = 115mA

In-Line Ato/Atc Fuse Holder
Your Price:
$3.99

In-Line Ato/Atc Fuse Holder

464-445199-1

Inline ATO/ATC Fuse Holder

The Inline ATO/ATC Fuse Holder has an injection molded fiberglass reinforced nylon construction.

  • Amps: 30
  • Wire length: 4" each side

Inline Auto Style Fuse Holder
Your Price:
$6.99

Inline Auto Style Fuse Holder

464-420509-1

Inline Auto Style Fuse Holder

  • Wire length: 3-1/2"
  • Maximum amps: 20
  • Injection molded PVC

In-Line Fuse W/20 Amp Fuse
Your Price:
$3.99

In-Line Fuse W/20 Amp Fuse

464-420500-1

Inline Fuse w/20 Amp Fuse

  • Wire size: 14 gauge
  • Wire length: 11-1/2"/side
  • Fuse size: 1/4" x 1-1/4"
  • Injection molded nylon construction
  • Includes 20 amp fuse

Fuse Holder 3AG Water Resistant
Your Price:
$3.99

Fuse Holder 3AG Water Resistant

464-5021

Fuse Holder 3AG Water Resistant 

The Blue Seas Systems 3AG Water Resistant Fuse Holder replaces the fuse holder found in Contura waterproof fuse panels. It will withstand the water exposure normally encountered in above the deck applications; salt spray, rain, hose washdowns, and momentary immersions.

    Features:
  • Max voltage: 32V DC
  • Max amperage: 20 Amperes
  • Easy to open
  • IP66 protected against powerful water jets
  • Mounting hole diameter: 0.50" (12.70mm)

Fuse Holder W/Push-In Cap
Your Price:
$3.99

Fuse Holder W/Push-In Cap

464-420501-1

Fuse Holder w/Push-In Cap

  • Thread depth: 1/4"
  • Fuse diameter: 19/32"
  • Release location: Side
  • Fuse size: 1/4" x 1-3/4"
  • Stamped brass/molded Bakelite

Fuse Holder Waterproof ATO/ATC
Your Price:
$8.99

Fuse Holder Waterproof ATO/ATC

464-5065

Fuse Holder Waterproof ATO/ATC

The Blue Sea Systems Waterproof In-Line ATO/ATC Fuse Holder is equipped with 12 AWG pigtails and can be used with ATO or ATC fuses with a 30A maximum amperage.


Fuse Block STblade Bottom 4 circuit Kit
Your Price:
$37.99

Fuse Block STblade Bottom 4 circuit Kit

464-5024

Fuse Block STblade Bottom 4 circuit Kit

The Blue Sea Systems ST-Blade Battery Terminal Mount Fuse Block Kit is designed to allow easy installation of 4 ATO/ATC fused circuits. It features a ST-Blade battery terminal mount fuse block with 4 screw terminals for securing wire and mounts on the battery terminal stud. It also has a battery positive ground bar with 4 screw terminals.

    Features:
  • Maximum amperage: 100/Block, 30/Circuit
  • Maximum voltage: 32VDC
  • Circuits: 4
  • Mounting: Clearance for 3/8" stud
  • Screw terminal type: #8-32 Screw with captive star lock washer
  • Included:
  • ST-Blade battery terminal mount fuse block
  • ATO/ATC 15A Fuse
  • (8) Nylon insulated ring terminals
  • Battery terminal mount busbar
  • Insulating covers

Fuse Block ST Blade 12 12 W/GRD/CVR
Your Price:
$59.99

Fuse Block ST Blade 12 12 W/GRD/CVR

464-5026

Fuse Block ST Blade 12 12 W/GRD/CVR

Blue Sea Systems Screw Terminal Blade Fuse Blocks have a compact construction that is designed to consolidate branch circuits. This design eliminates the hassle of inline fuses for electronics and other appliances. The available clear insulating cover provides storage for spare fuses, accepts small format labels for identification, and meets ABYC/USCG insulation requirements.

    Features:
  • Can be used for 24 hour circuits
  • Accepts ring or spade type terminals
  • 32 VDC
  • 30 amps per circuit; 100 amps per block
  • ATO/ATC fuses

ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover
Your Price:
$47.99

ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

464-5025

ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

The ST Blade Fuse Block can offer a space saving and cost effective solution to adding circuit protection when there are limited available circuit breakers on the distribution panel. A single circuit breaker on a distribution panel can provide the circuit protection for the feed wire to the ST Blade Fuse Block. This is frequently done for electronics that each have their own ON-OFF switch and don’t require the switching offered by a circuit breaker. The 6 or 12 position ST Blade Fuse Block then provides a consolidated location for fuses for each of the electronics.

  • Consolidates branch circuits and in-line fuses
  • Positive distribution bus with #10-32 stud
  • Can be used for 24-hour circuits
  • Models available with or without a cover
  • Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification
  • Fuse blocks with covers include 20 write-on circuit labels
  • Tin-plated copper buses and fuse clips
  • Accepts ring or snap fork type terminals
  • Accepts ATO® and ATC® fast acting blade fuses
  • Fuses sold separately

Circuit Breaker Push-Button 10A
Your Price:
$5.99

Circuit Breaker Push-Button 10A

464-7054

Circuit Breaker Push-Button 10A

Blue Sea Systems Push Button Reset-Only Circuit Breakers are equipped with a quick-connect terminal for providing circuit protection for up to 40 Ampere loads. The circuit breaker's compact design allows for high density circuit protection configurations and is equipped in many Blue Sea Systems panels.

    Features:
  • Voltage maximum operating: 32V DC and 250V AC
  • Push-to-test operation
  • Branch circuit breakers
  • 1/4" Male quick connect terminals
  • Trip-free design to eliminate being held in "on" position