Extension Box Kit 13.5° Transom Angle x 12.000” Straight Back, Black

IMCO Standard Height Extension Box Only

This is the most advanced, easy to install, state of the art standard box on the market today. The torsional drive shaft helps cushion the shock to the outdrive when shifting in and out of gear, and on and off throttle operations. Inferior designed competitor's boxes use a drive shaft that is solid mounted to the flywheel, doing away with your coupler. Their units literally hammer the internal components in your drive, which rapidly accelerates failure.

IMCO's torsional driveshaft and the stock MerCruiser rubber coupler are designed to absorb shock resulting from extreme high performance applications and rough water conditions.

356 T-6 cast aluminum transom motor mount brackets available for both neutral and 3"lift extension boxes.

Lightweight super strong cast 356 T-6 aluminum extension boxes, available in 12" neutral set-back or 12" set-back with 3" lift.

356 T-6 aluminum side mount steering brackets allows ample mounting clearance for optimum K-Plane placement - clears most exhaust ports, swim brackets, etc. - keeps rams on pivot center line.

EXTENSION BOX KITS "AVAILABLE IN A 3.000" LIFT"

Extension Box Kit 13.5° Transom Angle x 12.000” Straight Back, Silver

IMCO Standard Height Extension Box Only

This is the most advanced, easy to install, state of the art standard box on the market today. The torsional drive shaft helps cushion the shock to the outdrive when shifting in and out of gear, and on and off throttle operations. Inferior designed competitor's boxes use a drive shaft that is solid mounted to the flywheel, doing away with your coupler. Their units literally hammer the internal components in your drive, which rapidly accelerates failure.

IMCO's torsional driveshaft and the stock MerCruiser rubber coupler are designed to absorb shock resulting from extreme high performance applications and rough water conditions.

356 T-6 cast aluminum transom motor mount brackets available for both neutral and 3"lift extension boxes.

Lightweight super strong cast 356 T-6 aluminum extension boxes, available in 12" neutral set-back or 12" set-back with 3" lift.

356 T-6 aluminum side mount steering brackets allows ample mounting clearance for optimum K-Plane placement - clears most exhaust ports, swim brackets, etc. - keeps rams on pivot center line.

EXTENSION BOX KITS "AVAILABLE IN A 3.000" LIFT"

Livorsi 13.5" wide x 15.5" long 850 Series Trim Tabs

• Available in 11 powder coat colors and private labeling
• Mil-Spec hard coat anodized topped with a powder coat finish to prevent corrosion
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats
• For use on boats 20 - 50 feet
• Choose between LED electronic position indication (plug and play) or mechanical position indication (uses 33C cables)
• Electronic models are compatible with NMEA 2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• These cylinders may be serviced
• Five anodes for complete saltwater protection

These kits Include:

• Two billet tabs
• Two pumps
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

• A: 13-1/2" diameter wheel.
• B: 5" Top of Knob to Bottom of Wheel Depth
• C: 3-1/2" Top of Wheel to Bottom of Wheel Depth
• 316 SS Cast Hub.
• Highly polished spoke.
• Wheel features finger grips and a control knob for easy maneuvering
• Designed to fit a standard, 3/4" tapered shaft
• Includes choice of mounting nut, 1/2"-20, 5/8"-18 or 12mm x 1.75
• The 1/2"-20 nut fits most mechanical steering cables
• The 5/8"-18 nut fits most hydraulic steering systems

Size: 13.5" x 34.8", Color: Black, Boat Size: 50' and Over, Case: 4

Size: 13.5" x 34.8", Color: Blue, Boat Size: 50' and Over, Case: 4

Size: 13.5" x 34.8", Color: White, Boat Size: 50' and Over, Case: 4

Non-Magnetic Stainless Steel Steering Wheel, 13.5" Diameter, 25 Degree Dish, 5 Spoke Black Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Steering Wheel, 13.5" Diameter, 25 Degree Dish, 5 Spoke Gray Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Steering Wheel, 13.5" Diameter, 25 Degree Dish, 5 Spoke

Need help installing your new steering wheel? Check out this handy tutorial!

The Mega Grip marine steering wheel, hand painted with UV resistant, cool touch paint, or hand wrapped with marine grade vinyl, with clear anodized spokes. This wheel is 13.5 inch in diameter, 1.25 inches of dish with our Mega Grip for maximum comfort and control. Steering Wheel ONLY, does not include a hub, it’s designed to mount on your existing six bolt “Momo” pattern hub.