Outboards - Fuel System Parts

MSD 6-M-2 Marine Ignition Control Box
Your Price:
$399.99

6M-3L Marine Ignition Control Box with Digital Rev Limiter

120-6564

MSD 6M-3L Marine Ignition with Digital Rev Limiter

    Highlights:
  • Large, easy to read LED display
  • Shift interrupt feature eases shifting
  • MSD’s smoothest rev limiter yet, protecting parts and saving your engine
  • Records highest RPM the engine turned for last 20 minutes of run time
  • Easy setup of features with three rotary dials on the face of the unit
  • Built-in Start Retard adjustable in 0⁰, 10⁰ or 20⁰ increments for quick, easy starts and extend starter life
  • LED display shows rev limit, highest RMP turned, cylinder select, start retard, battery voltage and can be set to tach mode
  • Full delivery of spark energy and easy starting down to 6 volts battery supply
  • Highly efficient, low current draw for extended battery life
  • Fully potted housing to withstand demanding marine conditions
  • Sealed connector for clean wiring and trouble-free operation
  • Works on 4, 6 and 8 cylinder engines
  • Reverse polarity and overheat protection provide ultimate reliability
  • Can be triggered by magnetic pickup, amplifier, and points inputs

MSD has raised the bar and added an all-new UL listed marine ignition box to their lineup. The 6M-3L is a fully sealed unit with a single wiring connector makeing installation neat and easy.

Three rotary dials and an LED display simplfy setting the cylinder select, start retard and rev limiter. Plug-in rev limiter chips and hard to read dials are a thing of the past. For diagnostic purposes, the LED display can also be set to a live tach mode on V8’s and even display battery voltage with the turn of a knob.

The 6M-3L is a capacitive discharge ignition that multi-sparks from idle to 3,000 RPM providing a clean idle and quick throttle response. Above 3,000, capacitive discharge sparks will run clean through 12,000 RPM . Boasting more features and higher spark energy than its predecessor, the 6M-3L is the performance upgrade your boat needs!


CD-1 Capacitive Discharge Ignition System for Marine Applications
Your Price:
$539.99

CD-1 Capacitive Discharge Ignition System for Marine Applications

110-103003

Daytona Sensors CD-1 Capacitive Discharge Ignition Box and Coil System for Marine Applications
  • 135 mJ spark energy output.
  • Built-in data logging capability with 16 Mbit DataFLASH memory.
  • Dedicated input terminals for launch RPM and manifold pressure.  
  • One general purpose input and two general purpose input/output terminals. Inputs can be programmed for high gear retard, burnout RPM limit, vehicle speed sensor, and throttle position sensor.
  • Outputs can be programmed for RPM window switch, nitrous system activation, and multi-gear shift light functions.
  • Fully encapsulated construction using surface mount electronics. Waterproof and highly resistant to vibration and shock.  12 pin Deutsch connector used for signal connections.
  • Compact size. Module is 7.0”L x 5.25”W x 1.9”H. Coil is 4.4”L x 3.2”W x 3.0”H                            
  • Highly efficient switching power supply based on US Patents 6518733 and 6636021. Less than 5 amp current draw at 8,000 RPM. Rated for continuous operation at 8,500 RPM and 85º C (185º F).
  • Compatible with 8 cylinder marine engines with distributor type ignition.
  • Digitally set RPM limit with 100 RPM steps from 3,000 to 9,900 RPM.
  • Seven switch selectable advance curves and a fixed timing mode cover most Mercury marine high performance applications.
  • PC programmable idle stabilization feature.
  • PC programmable advance features ranging from a simple RPM based advance curve to a 3D timing map with boost proportional retard.   
  • Dedicated input terminals for manifold pressure and an externally activated 0-18 degree retard feature.
  • Three general purpose input/output terminals. Two inputs are reserved for data logging. An additional input/output terminal can be used for data logging or as an RPM window switch.
  • Module and coil are both certified to meet the ignition protection requirements of the NMMA, the USCG, ISO 8846 and SAE J1171 SAE standards for marine applications. 

Crimp Style Stepless Clamp BRP 346150
Your Price:
$13.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp BRP 346150

676-9-35602

Universal Crimp Style Stepless Clamp Kits (10 pcs)
For: BRP 346150
Fits: Various Fuel / Vent Hose Applications (18.5mm) 25/32”


Crimp Style Stepless Clamp BRP 346785
Your Price:
$11.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp BRP 346785

676-9-35600

Universal Crimp Style Stepless Clamp Kits (10 pcs)
For: BRP 346785
Fits: Various Fuel / Vent Hose Applications (14.5mm) 9/16”


Crimp Style Stepless Clamp BRP 346786
Your Price:
$6.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp BRP 346786

676-9-35604

Crimp Style Stepless Clamp Kits (10 pcs)
For: BRP / Yamaha 346786 / 65L24387-00, Mercury 54-13791
Fits: Various Fuel / Vent Hose Applications (15.7mm) 39/64”


Crimp Style Stepless Clamp BRP 347107
Your Price:
$12.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp BRP 347107

676-9-35608

Universal Crimp Style Stepless Clamp Kits (10 pcs)
For: BRP 347107
Fits: Various Fuel / Vent Hose Applications (13.3mm) 1/2”


Crimp Style Stepless Clamp Mercury 54-850241
Your Price:
$11.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp Mercury 54-850241

676-9-35601

Mercury Crimp Style Stepless Clamp Kits (10 pcs)
For: Mercury 54-850241
Fits: Various Fuel / Vent Hose Applications (14.0mm) 35/64”


Crimp Style Stepless Clamp Mercury 54-855228
Your Price:
$10.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp Mercury 54-855228

676-9-35609

Mercury Crimp Style Stepless Clamp Kits (10 pcs)
For: Mercury 54-855228
Fits: Various Fuel / Vent Hose Applications (25.6mm) 1”


Crimp Style Stepless Clamp Various Applications
Your Price:
$8.95

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Crimp Style Stepless Clamp Various Applications

676-9-35606

Universal Crimp Style Stepless Clamp Kits (10 pcs)
Fits: Various Fuel / Vent Hose Applications (19.8mm) 3/4”


Fuel Connector 3/8” hose barb
Your Price:
$4.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector 3/8" hose barb

676-9-38004

Fuel Connector 3/8” hose barb use w/ 9-38012.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Chrysler/Force F197787T3
Your Price:
$9.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Chrysler/Force F197787T3

676-9-38013

Fuel Connector
Replaces: Chrysler / Force F197787T3 - 3/8” hose barb use w/ 9-38006.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Chrysler/Force F213238T2
Your Price:
$5.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Chrysler/Force F213238T2

676-9-38006

Fuel Connector
Replaces: Chrysler / Force F213238T2 - 1/4” NPT use w/ 9-38013.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Honda 16977-ZV5-900
Your Price:
$7.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Honda 16977-ZV5-900

676-9-38001

Fuel Connector
Replaces: Honda 16977-ZV5-900 - 1/4” NPT use w/ 9-38008 & 9-38009.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Honda 16977-ZV5-A00
Your Price:
$6.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Honda 16977-ZV5-A00

676-9-38007

Fuel Connector
Replaces: Honda 16977-ZV5-A00 - 1/4” NPT use w/ 9-38009
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Honda 17650-921-003ZB
Your Price:
$18.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Honda 17650-921-003ZB

676-9-38005

Fuel Connector
Replaces: Honda 17650-921-003ZB - 3/8” NPT
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Johnson/Evinrude 174508
Your Price:
$4.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Johnson/Evinrude 174508

676-9-38014

Fuel Connector
Replaces: Johnson / Evinrude 174508 - 5/16” hose barb use w/ 9-38010.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Johnson/Evinrude 176445
Your Price:
$4.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Johnson/Evinrude 176445

676-9-38015

Fuel Connector
Replaces: Johnson / Evinrude 176445 - 3/8” hose barb use w/ 9-38010
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Johnson/Evinrude 772681
Your Price:
$6.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Johnson/Evinrude 772681

676-9-38010

Fuel Connector
Replaces: Johnson / Evinrude 772681 - 1/4” NPT use w/ 9-38014 & 9-38015.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Mercury
Your Price:
$11.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Mercury

676-9-38012

Fuel Connector
Replaces: Mercury - 1/4” NPT use w/ 9-38003 & 9-38004.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!


Fuel Connector Mercury 22-13563T3
Your Price:
$7.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Fuel Connector Mercury 22-13563T3

676-9-38003

Fuel Connector
Replaces: Mercury 22-13563T3 - 5/16” hose barb use w/ 9-38012.
These outboard fuel fittings/connectors are available in several finishes and sizes to meet all of your marine fuel system needs. Don't confuse these with cheap screw machined fittings that have sharp or square edges that rob you of the flow your engine is counting on at that critical moment!