"For use on automatic pumps or pumps with float switch. Water resistant rocker switch. Not external ignition protected. 1/4" spade terminals."
Positions: Auto/Off/Manual, Volts: 6-32, Amps: 10, Case: 6, Plate: 2-13/16" x 1-7/8"
"High water alarm with a float switch features digital technology using the patented Mirus field effect. Totally sealed fluid detector is never in contact with water, will not corrode and is not affected by oil or debris. Bilge Alert detects water, turns on the bilge pump, triggers an LED light on the panel, and sends a signal (3 seconds delay) to the alarm and switch conveniently mounted on a panel which measures 2-1/2" x 2". Three way rocker switch allows alarm to be tested, turned off and armed."
Description: Alarm with Ultima Switch, Volts: 12, Max Amps: 20
Easy to read, resettable bilge pump counter. Check frequency of bilge pump operation to head off potential issues down the road.
Injection molded ABS. This deluxe version comes with a 3 way switch allowing both automatic and manual switching of bilge pump. Includes 20 amp. circuit breaker.
Size: 2-3/16" x 3", Fastener: #6RH, Case: 5
High water alarm featuring digital technology using the patented Mirus field effect. Totally sealed fluid detector is never in contact with water, will not corrode and is not affected by oil or debris. Bilge Alert detects water and sends a signal (3 seconds delay) to the alarm and switch conveniently mounted on a panel. Three way rocker switch allows alarm to be tested, turned off and armed.
Description: Alarm with Sensor, Volts: 12
For any manually operated system. Attractive Black stainless steel panel. Fingertip control.
Volts: 12-32, Size: 2-1/4" W x 2" H"
"Has three positions: automatic, off and manual. Manual position has famous "fail-safe" spring return "off" so pump can't be left on by accident. Black stainless steel panel."
Volts: 12-32, Size: 2-1/4" L x 2" H"
"Has a built-in fuse holder and an internally lighted rocker switch with 3 positions with the "fail-safe" spring return "off" from the "manual" position. Features a black plastic panel."
Volts: 12, Size: 2-7/8" W x 2-3/8" H"
The system includes a float switch and in-dash gauge with both a visual and audible 85 db alarm. Allows an unmanned compartment to be constantly monitored. For additional compartments, just add additional float switches. Complies with CFR 182.530 for a visual and audible alarm in each unmanned space on commercial vessels at least 26' in length.
"Lighted stainless steel 3-way bilge pump switch. When using the Momentary-On switch, bilge pump can be operated bypassing the automatic float switch - switch automatically returns to "OFF" when released. Can be used with any 12V bilge pump. Screws are also included."
Fuse: 2.5A, Size: 3-1/2" L x 2" W", Case: 12
3 Position: On - Off - Mom. On 3 Blade type terminals. Single pole. Water resistant plastic housing.
Description: Rocker switch, Volts: 12, Amps: 15, Size: 1" x 1-11/16"Cut-out size:27/32" x 1-29/64", Case: 12
Description: Switch w/bilgepump faceplate, Volts: 12, Amps: 20, Size: "Stem: 11/16" L Diameter: 15/32", Case: 12
For automatic shut off operation to prevent pump damage.The vacuum switch works with all self-priming impeller pumps and should be used for bilge pumping/emptying of tanks to prevent the pump from dry running. The vacuum switch automatically shuts the pump off when the bilge/tank is dry. With the switch fitted, you can start the pump by remote push button or manually by depressing lever on the switch.
Description: Vacuum switch