Tank is intended for installation in any pumped water system controlled by a pressure switch and can serve as a storage vessel as well as a pulsation dampener. By smoothing water flow and reducing on/off switch cycling of the pump the result is quieter operation, and longer pump life. The even flow of water gives better control of hot water temperature with systems using instant water heaters. Snap fittings include both 1/2" barbed and 1/2" threaded fittings. Internal bladder. Pre-pressurized to 10 psi.
Capacity: 33 oz., Ports: 1/2" Hose Barb 1/2" Thread Size: 13-1/4" x 4-3/4" Dia.
This large tank will smooth flow from faucets and shower, reducing pump cycling and eliminating pulsations and water hammer. Water is totally separated from air chamber and metal tank by a bladder and polypropylene tank liner. Mounts horizontally, vertically, or upside down. Includes brackets and band clamps. Pre-pressurized to 20 psi. Tank may be fine tuned to cut-in pressure of pump. Internal bladder. NSF-61 listed for all water applications.
Capacity: 1 Gal., Ports: 3/4" NPT, Size: 12-5/8" H x 8" Dia.
With an accumulator tank incorporated in the pressurized water system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off, resulting in less wear and tear on the pump with fewer starts and stops. This accumulator tank has a pre-pressurized tank and an internal rubber bladder to ensure smooth and reliable water pressure. It is easy to fit to new or existing systems
Capacity: 1/2 Gal., Ports: 1/2" Hose"
A pneumatic pressure charge, matched to the pump cut-on pressure prevents waterlogging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Mounts in any position and anywhere in the cold water plumbing after the pump. May be used for fresh or salt water. Operating pressure up to 100 psi. Mounting hardware included.
Capacity: 1 Gal., Ports: 3/4" NPT", Size: 12.63" L x 8" dia."
Tank is intended for installation in any pumped water system controlled by a pressure switch and can serve as a storage vessel as well as a pulsation dampener. By smoothing water flow and reducing on/off switch cycling of the pump the result is quieter operation and longer pump life. The even flow of water gives better control of hot water temperature with systems using instant water heaters. Easily fitted to new or existing systems with quick connect fittings. Mounting point for optional pressure switch. Internal bladder. Manufactured from food grade materials, NSF Standard 18 listed.
Capacity: 21.5 oz., Ports: 1/2" Hose & 1/2" Thread", Size: 8.4" L x 4.7" Dia."
The Shurflo nylon accumulator tank smooths water faucet pulses and reduces pump cycling to keep water line pressure and pump motors cool. It incorporates a nylon housing and a butyl rubber diaphragm to maintain pressure for years. Pre-pressurized to 30 psi. Fittings are included.
Capacity: 24 oz., Ports: 1/2" NPSM", Size: 9.1" x 4.8" x 3.8" Sold: Each