3/4" Round Tapered Cast Aluminum Steering Shaft Adapter

These cast aluminum steering shaft adapters feature a 3-3/4" O.D with a 3/4" round shaft provision while providing the popular 3-bolt steering wheel mount.  The unit is 1-1/4" tall. These offer an economical choice for steering wheel mounting and have a low profile. Center line on the three bolt holes is 1-3/4"

This shaft adapter is designed to have a 3-bolt wheel and cap directly mounted to it and isn't for use with any of our standard 3 to 5/6/9 bolt steering wheel adapters without modification.

We offer a very wide selection of steering wheel adapters to fit most popular applications.  What you need to know before you purchase your new steering wheel is just what type of steering post or helm that your boat utilizes. The most common styles are a round 3/4" tapered shaft with a keyway or a square style shaft without a keyway.  Most of the steering wheels available are sold without a mounting provision.  That's where billet steering wheel adapters come in.  If your boat currently has a steering wheel that is mounted to a 3-bolt adapter you would need to purchase the appropriate steering wheel adapter, which will bolt to the steering wheel and then to your flange adapter.

Note: This adapter does not have a polished finish in the center section, however this will not be visible when installed.

Need help installing your new shaft adapter? Check out this handy tutorial!

Pair Of Polished Custom Dimension Bravo Wet Offshore Tailpipes

This 4" O.D x 3-1/2" I.D wet tailpipe is the standard pipe used on the wet offshore system All necessary tailpipe hardwareis included. Sold in pairs.

Additional Information:

• Standard Alpha/Bravo Exhaust Hole Locations
• Custom Measurement Instructions

Priced according to your dimensions.  Submit yourcustom measurements for a price quote.

316L Stainless Steel Quick Engine Flush Connector

Our engineering team has developed this attractive easy to use quick connect thru-hull flushing system. These 316L stainless steel flushing thru-hulls allow the quick connection of a garden hose to this fitting in mere seconds. While the opposite end of the thru-hull features a 1/2" NPT female connection that can be connected into the inlet side of your cooling system or sea strainer. When the garden hose is removed this unit looks like a simple thru-hull yet has a spring loaded internal check valve. Mounting Width: 3-15/16" Depth: 4-3/16"

-6 Hose Extension

2 per Gimbal Housing Assembly

MSD 8.5 MM Spark Plug Wire Set Big Block Chevy with Socket Distributor Cap

• Only 40-50 ohms resistance per foot of wire (lowest of any helically-wound wire)
• MSD Ignition Copper alloy conductors result in less spark energy loss so more reaches spark plugs
• Over 40 feet of conductor per foot of wire
• Conductors are wrapped around ferro-magnetic center cores, which effectively suppresses electro magnetic interference
• Outer sleeves consist of silicone and synthetic material for a strong resistance to heat, abrasion, and tearing
• Made in the USA
• 90 degree ends

Precision Roller Bearing Dual Carburetor Linkage Kit - B&M/Holley 250 Side Mounted Standard Holley And Demon

These linkage kits are used on dual carbureted applications such as supercharger and tunnel rams when the carburetors are mounted sideways. Their high quality roller bearing design assures precise throttle operation.

Precision Roller Bearing Dual Carburetor Linkage Kit - B&M/Holley 420 Mega Blower Side Mounted Standard Holley And Demon

These linkage kits are used on dual carbureted applications such as supercharger and tunnel rams when the carburetors are mounted sideways. Their high quality roller bearing design assures precise throttle operation.

This Linkage Kit Requires That The Blower Case Has a 5/16" Threaded Hole in the Side, about 1/2" Way Up. Some of the early B&M Blowers Do Not have this hole and this kit WILL NOT WORK.

Small Block Chevy, Standard Length Small Block Chevy

Small Block Chevy Hydraulic Roller Lifter Set

Comp Cams lifters are designed for use in the most demanding of situations. Whether your needs are a standard hydraulic or the captured link bar style hydraulic roller lifters we have you covered.

• Constructed of 316L Stainless Steel.
• Fits most plumbing applications.
• Designed to fit Big Block and Small Block Chevrolet engines.
• Bypass hole can also be used for temperature sender.
• Length 4", Width 2-3/4", Height 2-1/2"
• Two -10 AN flare fittings and a 3/8" NPT bypass port.
• Includes bolts and gasket.