615-5723 Used - Available: (1) One
- SOLD AS IS
- NON RETURNABLE
Please study photo carefully, item is sold as shown.
|
|

620-920120
- 12" Stroke.
- Overall Length Closed is 19-7/8".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- Replaces Livorsi SSA12 actuator.
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|

730-SSA16
- 16" Stroke.
- Overall Length Closed is 22-3/8".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|

620-920018
- 18" Stroke.
- Overall Length Closed is 25-1/4".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- Replaces Livorsi SSA18 actuator.
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|
620-921018
- Marine grade stainless steel & aluminum construction
- 12 DC sealed electric motors, 2-wire simple hook-ups
- Compact Size, Light Weight, for Maximum Lifting Capacity
- Two Standard Length Cylinders with Simple Pin Mounts
- Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
- Smooth Quiet Responsive Hydraulic Action with No-Coasting
- Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
- 1” Cylinder.
- System is virtually maintenance free
- Operating Temperatures 10 to 165 Degrees F
- System can Operate with Environmentally Responsible Fluid
- 18" Model Dimensions: 26” Retracted Length, 44” Extended Length.
- NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator.
|
|

620-920024
- 24" Stroke.
- Overall Length Closed is 31-1/4".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- Replaces Livorsi SSA24 actuator.
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|
620-921024
- Marine grade stainless steel & aluminum construction.
- 12 DC sealed electric motors, 2-wire simple hook-ups.
- Compact Size, Light Weight, for Maximum Lifting Capacity.
- Two Standard Length Cylinders with Simple Pin Mounts.
- Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
- Smooth Quiet Responsive Hydraulic Action with No-Coasting.
- Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
- 1” Cylinder.
- System is virtually maintenance free.
- Operating Temperatures 10 to 165 Degrees F.
- System can Operate with Environmentally Responsible Fluid.
- 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
- NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator.
|
|
620-920012
- 3-position Momentary On/Off/Momentary On
- This switch is designed to be used for hatch rams and actuators.
|
|

730-SSA4
- 4" Stroke.
- Overall Length Closed is 11-7/8".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|

730-SSA8
- 8" Stroke.
- Overall Length Closed is 15-7/8".
- Strong eyelet mount allows a wide range of angles for easy installation.
- Marine grade stainless steel housing
- Sealed precision die cast housing.
- 12 VDC
- Safe working dynamic load limit of 400 lbs.*
- Static Limit of 500 lbs.*
-
Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
- NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|
620-434
- For use with Single or Dual Actuator.
- Transfers the electric load from your dash accessories to the accelerator box, increasing the total voltage to the hatch actuator is greatly increased.
- Accelerates hatch opening and closing.
|
|
620-920010
- Highly polished heavy gauge stainless steel.
- Sold Each.
- Fits Hardin Marine hatch actuators.
- Includes a 1/2" stainless steel actuator mounting bolt, washers and locknut.
- Fasteners for mounting the bracket to the boat and hatch are NOT included.
|
|
620-920016
- Highly polished heavy gauge stainless steel.
- Sold Each.
- Fits Hardin Marine hydraulic hatch actuators.
- Includes a 1/2" stainless steel actuator mounting bolt, washers, bushings and locknut.
- Fasteners for mounting the bracket to the boat and hatch are NOT included.
|
|
620-920011
- Stainless steel pin and billet aluminum handle.
- Designed to be used in conjunction with the Hardin Marine hatch rams and mounting brackets.
- Quick and easy way to release the hatch ram for hatch removal or full range opening.
- Can also be used to release the hatch ram in the event of battery failure provided you have an access panel within easy reach of the pin.
|
|
620-920005
Replacement electric motor only. Fits Livorsi hatch rams, Warner Hatch rams, Hardin Hatch rams and Thomson
Hatch rams. Mounting Bolt Center to Center is 2"
|
|
620-920013
- Lessens stress put on mounting bracket.
- Prevents damage to your mounting bracket.
- Stops the hatch ram from over-contracting.
|
|

620-922012 The New HMMA2 series linear hatch actuator / hatch lift / hatch ram was specifically designed for applications which face harsh working environments and require ruggedness and durability. Its IP66D protection and USCG approval ensures it will withstand high temperature,high pressure water jets and the ingress of dust and other solid contaminants. This has also passed the 500 hour salt spray test . We are stocking three replacement lengths 12,18 and 24" for more information view our installation instructions .
- These are a direct replacement for the Dana-Warner, Thomson, Livorsi brand
- Spindle type "Acme Screw"
- Voltage 12v DC
- Functions for Limit switches at full retracted/extended positions to cut current to prevent damage
- Overload clutch Standard on all models
- IP rating - IP66D
- USCG approved
- Tinned Leads
- Safe working dynamic load limit of 338 lbs.*
- Static Limit of 439 lbs.*
- Billet black anodized extrusion shaft housing
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|

620-922018 The New HMMA2 series linear hatch actuator / hatch lift / hatch ram was specifically designed for applications which face harsh working environments and require ruggedness and durability. Its IP66D protection and USCG approval ensures it will withstand high temperature,high pressure water jets and the ingress of dust and other solid contaminants. This has also passed the 500 hour salt spray test . We are stocking three replacement lengths 12,18 and 24" for more information view our installation instructions .
- These are a direct replacement for the Dana-Warner, Thomson, Livorsi brand
- Spindle type "Acme Screw"
- Voltage 12v DC
- Functions for Limit switches at full retracted/extended positions to cut current to prevent damage
- Overload clutch Standard on all models
- IP rating - IP66D
- USCG approved
- Tinned Leads
- Safe working dynamic load limit of 338 lbs.*
- Static Limit of 439 lbs.*
- Billet black anodized extrusion shaft housing
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|

620-922024 The New HMMA2 series linear hatch actuator / hatch lift / hatch ram was specifically designed for applications which face harsh working environments and require ruggedness and durability. Its IP66D protection and USCG approval ensures it will withstand high temperature,high pressure water jets and the ingress of dust and other solid contaminants. This has also passed the 500 hour salt spray test . We are stocking three replacement lengths 12,18 and 24" for more information view our installation instructions .
- These are a direct replacement for the Dana-Warner, Thomson, Livorsi brand
- Spindle type "Acme Screw"
- Voltage 12v DC
- Functions for Limit switches at full retracted/extended positions to cut current to prevent damage
- Overload clutch Standard on all models
- IP rating - IP66D
- USCG approved
- Tinned Leads
- Safe working dynamic load limit of 338 lbs.*
- Static Limit of 439 lbs.*
- Billet black anodized extrusion shaft housing
*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage.
Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.
|
|
620-921013
- Lessens stress put on mounting bracket.
- Prevents damage to your mounting bracket.
- Stops the hatch ram from over-contracting.
- Only to be used on 620-921018 and 620-921024.
ID: 1 1/4”
OD: 5/8”
|
|