120-84661
- Same high output assembly that is currently found in all MSD Distributor.
- Supplied with the two pin connector installed
|
|
620-32300 Magnum Choice Replacement Polished Tailpipe - Big Block Bravo
The Magnum Choice Tailpipe was designed for use in boats with a selectable
exhaust diverter system. These pipes are sold in pairs.p>
Additional Information:
|
|
620-32302 Magnum Choice Replacement Polished Tailpipe - Custom The Magnum Choice Tailpipe was designed for use in boats with a selectable exhaust diverter system. These pipes are sold in pairs. Additional Information: Priced according to your dimensions. Submit your custom measurements for a price quote.
|
|
625-1037 Replacement Main Body O-Ring for Hardin Marine Multi Stage Sea Pumps - Gen I
|
|
625-4060 Main Bracket for Hardin Marine Multi Stage Sea Pumps
|
|
620-3159M Mando 65 Amp Marine Alternator
The Mando style marine alternator is Coast Guard approved and replaces your Delco type (reference no. 3856600). These feature non-corrosive elements for longer lasting life. 12 Volt, 65 Amp for Mercruiser, VolvoPenta, Universal Atomic 4 as well as others.
- Replaces: Mercruiser # 805884T & 805447T
- Replaces Sierra 18-5965 and Arco 60065
- Red Wire is for Sensor
- Purple Wire is for Excitation
- Replacement Voltage Regulator # VR54
- V-Groove Pulley
|
|
421-213 Mando Alternator Pulley Hardin Marine has the correct billet alternator pulley for your Mando alternator. Just slide yours off and replace it with Hardin polished billet pulley.
|
|
620-3149M Mando Style Alternator - 12 Volt, 65 Amp, Single Pulley
This marine alternator is Coast Guard approved and replaces your Delco type (reference No.3856600). These feature non-corrosive elements for longer lasting life. Internal fan. Single V-Groove Pulley. Replaces Pleasurecraft RA097007B, Delco 19020608, Sierra# 18-6288, Arco# 20825 . Internally regulated.
**This alternator requires a plug item #620-3149MW**
|
|
620-3186M Small Frame New Mando Alternator - 12 Volt, 55Amp for Mercruiser, VolvoPenta, Universal Atomic 4 as well as others. Internal Regulator, Negative Ground, Complete With Screens. USCG Approved and features non-corrosive elements.
- 55 Amp Replaces
Motorola nos.78403A2, 8MR2023F & 8MR2024F
Mando # AC 155603
Mercruiser #'s 12449, 817119A1, 817119A4 & 92497A3
OMC #'s 3854182, 3853853, 3854809, 987774, 985465, 986008 & 988247
Volvo #'s 3854809-5, 3854182-7, 3853853-4 & 3850927-9
GM nos.78477 & 9793
Crusader 39200
Marine Power 1210-000
- Red Wire is for Sensor
- Purple Wire is for Excitation
- Replacement Voltage Regulator # VR54
|
|
421-207M Mandrel For Power Steering Pulley
This Mandrel presses on the pumps drive shaft and allows for easy bolting up of the 421-207 pulley.
Fits saginaw style power steering pumps with 3/4 dia. shafts.
|
|
421-205M Mandrel For Sea Pump Pulley
|
|
500-718
- For Log Manifolds
- 5" Outside Diameter
- 3" Inside Diameter
- 2-15/16" Bolt Hole to Bolt Hole (Adjacent)
- 4-1/8" Bolt Hole to Bolt Hole (Across)
- Sold Each
|
|
420-906500 - Fits Hardin, Hardin Marine, Power Torque and Mercury Hi-Performance
- Replace your worn out hoses, or have a spare on hand!
- 1" Inside Diameter
- 6-1/2" Center to Center
|
|
620-910605 Marine Oil Pan Pick-up - Big Block Chevy Standard Jet Drive Gen 4, 5 & 6
High performance oil pickups to fit most popular applications. For use primarily on Hardin Marine Jet Drive (Gold) Oil Pans.
|
|
620-910608 Marine Oil Pan Pick-up - Ford Jet Pan Pick-up for truck style oil pump
High performance oil pickups to fit most popular applications. For use primarily on Hardin Marine Jet Drive (Gold) Oil Pans.
|
|
620-910606 Marine Oil Pan Pick-up - Olds Jet Pan
High performance oil pickups to fit most popular applications.
|
|
620-05111 Marine Seal™ Water Pump Cover Gasket - Oldsmobile 350/455- Sold Each
These Hardin Marine Seal timing cover/front cover gaskets are designed to exceed all original equipment specifications. Each gasket is precision die-cut for a perfect fit every time.
Sold Each
|
|
620-5323M Clockwise Rotation
Fits 6 & 8 cylinder engines with 14-1/4" flywheel and offset bolt pattern.
|
|
620-5314M Clockwise Rotation
Fits 4, 6 & 8 cylinder engines with 12-3/4" flywheel bottom mount and
straight bolt pattern.
|
|
620-5314ML Counter Clockwise Rotation
Fits 4, 6 & 8 cylinder engines with 12-3/4" flywheel bottom mount and
straight bolt pattern.
|
|
620-5315M Clockwise Rotation
For 455 Olds Marine V8 High Performance Engines, 9 tooth starter gear.
|
|
620-5323ML Counter Clockwise Rotation
- Fits 6 & 8 cylinder engines with 14-1/4" flywheel and offset bolt pattern.
- Fits Reverse Rotation Engines
- Fits Mercruiser, OMC, Volvo Penta & others using a GM Block 6-8 Cylinder w/ a 14 1/4" Flywheel
- Replaces Merc #"s 50-12121A2, 50-12177A2, 50-806964A3, 50-806964A4, 50-812428A3, 50-812604A2, 50-99418A2. OMC #'s 984456, 986505, 3850525, 3853982, 3855177
- Staggered Bolt Pattern
- Note: This starter uses SW-90 12V solenoid
|
|
620-286555
Master Rebuild Kit for Hardin Exhaust Diverters
This kit is used to replace worn out components on your Hardin Marine Diverter kit. The master kit includes replacement O-Rings, flappers, pivot shafts and bolts/nuts:
- (2) Diverter Flapper
- (2) Pivot Shaft
- (4) O-Rings
- (6) 10-32 x 5/8" Bolts
- (6) 10-32 Nylock Nuts
|
|
137-9275
- 7" Stroke Hydraulic Replacement Steering Ram
- Space Saver Ram for tight spaces
- Requires two 137-9227 bushings, sold separately, see related parts.
- 1/4" NPT female fittings.
- Measures 13.87" closed from center eyelet to end of threads.
- See Product Specs for detailed measurements.
|
|
137-9232 Mayfair 16" 316 SS Braided Hose Assembly Long
This hose is used in the Mayfair steering systems from the cylinder to the thru hull.
|
|
137-9233 Mayfair 22" 316 SS Braided Hose Assembly. -6 Fittings
This hose is used in Mayfair steering systems inside the boat.
|
|
137-9288 Mayfair 22" 316 SS Braided Hose Assembly Long
This hose is used in the Mayfair steering systems from the cylinder to the thru hull.
|
|