Ignition - Wire Sets

30 Ft. Boat Wiring Harness
Your Price:
$229.99

30 Ft. Boat Wiring Harness

620-08841

30 Ft. Boat Wiring Harness, Wired for Voltmeter and Mercury Style Cannon Plug

Wiring your boat does not have to be a hassle due to tangled wires, bad connections, and guess work. Poor wiring can ruin a boat. These boat harnesses use 275 degree, thermal crossed linked wire that will not kink and is abrasive resistant. Don’t take chances with your boat; trust the leader in marine wiring, Hardin Marine.

Note: Uses 14 AWG wire


Big Block Chevy Mercruiser Style Engine Harness For MSD Ignition
Your Price:
$229.99

Big Block Chevy Mercruiser Style Engine Harness For MSD Ignition

620-08904

Big Block Chevy Mercruiser Style Engine Harness For MSD Ignition

These wiring harnesses were designed for use in custom engine installations that use an MSD Ignition Box. Don't suffer from a tangled spaghetti-wire nightmare. Both the custom and universal harnesses are engineered of the highest quality wire, connections, terminals, and components.

Note: Uses 14 AWG wire


Custom MerCruiser Style Engine Harness
Your Price:
$146.99

Custom MerCruiser Style Engine Harness

620-08900

Custom MerCruiser Style Engine Harness - This unit is a Mercury style engine plug with 6-ft of un-terminated wire extending from it for the do-it-yourself installer.

These wiring harnesses were designed for use in custom engine installations. If you've ever tried to use an original Mercury harness on a custom engine installation you know that all of the wires either aren't located where you need them, or they're the wrong length. And there's so many that end up not being used. We have stepped in to build both a custom harness and a do-it-yourself harness using a factory Mercury style engine plug. Don't suffer from a tangled spaghetti-wire nightmare. Both the custom and universal harnesses are engineered of the highest quality wire,connections, terminals, and components.

Note: Uses 14 AWG wire


MerCruiser Style Wiring Pigtail - Mercury Plug, Instrument Side 12"
Your Price:
$49.99

MerCruiser Style Wiring Pigtail - Mercury Plug, Instrument Side 12"

620-08813

MerCruiser Style Wiring Pigtail - Mercury Plug, Instrument Side 12"

This plug is for use when building a boat harness. They are designed to plug into a Mercury engine harness. You can then connect your wiring and run it to your necessary gauges, switches, etc.

Note: Uses 14 AWG wire


Plug Wire 10” Outboard
Your Price:
$38.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire 10" Outboard

676-9-28008

Plug Wire 10”
Fits: Outboard, Female Screw in Coil.
Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire 9” Johnson/Evinrude 582365
Your Price:
$11.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire 9" Johnson/Evinrude 582365

676-9-28006

Plug Wire 9”
Replaces: Johnson/Evinrude 582365
Fits: Outboard, Male Post Style Coil.
Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire 9” Mercury 84-813715A1
Your Price:
$17.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire 9" Mercury 84-813715A1

676-9-28005

Plug Wire 9”
Replaces: Mercury 84-813715A1
Fits: Outboard, Female Push In Coil.
Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire Set Chris Craft 1958-71
Your Price:
$56.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Chris Craft 1958-71

676-9-28046

Plug Wire Set
Replaces: Chris Craft
For: 283F, 327F 1958-71 (side terminal)
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Chris Craft 1965-85
Your Price:
$44.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Chris Craft 1965-85

676-9-28017

Plug Wire Set
Replaces: Chris Craft
For: 140, 150, 160, 165 1965-85
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Chris Craft 427
Your Price:
$60.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Chris Craft 427

676-9-28044

Plug Wire Set
Replaces: Chris Craft
For: 427, 460 135 degree plug boots 1963-85
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Crusader 1961-69
Your Price:
$30.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Crusader 1961-69

676-9-28020

Plug Wire Set
Replaces: Crusader
For: 153 1961 – 69
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Crusader 4.3L 1983 – 88
Your Price:
$43.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Crusader 4.3L 1983 – 88

676-9-28015

Plug Wire Set
Replaces: Crusader
For: 262 / 4.3L 1983 – 88, 229 / 3.8L 1980 – 82
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application

 


Plug Wire Set Delco HEI
Your Price:
$42.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Delco HEI

676-9-28000

Plug Wire Set
Replaces: Delco HEI 305, 350 / V8 1985-98
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Ford 351
Your Price:
$44.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Ford 351

676-9-28003

Plug Wire Set
Replaces: Ford 351, 460 (90 degree plug boots) 1972-88
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set GM BB 1995 – 98
Your Price:
$83.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set GM BB 1995 – 98

676-9-28009

Plug Wire Set
Replaces: Crusader
For: All GM BB 1995 – 98 (w/center riser manifolds & 180 degree plug boots)
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set GM Engines 1991 – 98
Your Price:
$54.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set GM Engines 1991 – 98

676-9-28011

Plug Wire Set
Replaces: Crusader
For: All GM Engines 1991 – 98 (w/center riser manifolds & 180 degree plug boots)
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Johnson/Evinrude V4
Your Price:
$31.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Johnson/Evinrude V4

676-9-28092

Plug Wire Set
Replaces: Johnson/Evinrude
Fits: V4.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire Set Johnson/Evinrude V6 1994
Your Price:
$41.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Johnson/Evinrude V6 1994

676-9-28090

Plug Wire Set
Replaces: Johnson/Evinrude
Fits: V6 1994 & Prior.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire Set Mercruiser
Your Price:
$39.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Mercruiser

676-9-28014

Plug Wire Set
Replaces: Mercruiser
For: s/n: 0B434940 – 0B774251, 1987
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application


Plug Wire Set Mercruiser 1982 – 87
Your Price:
$45.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Set Mercruiser 1982 – 87

676-9-28002

Plug Wire Set
Replaces: Mercruiser s/n: 6083145 – 0B816540, 1982 – 87
Mallory Marine's New Promaster® Spark Plug Wires Sets are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for marine applications these wire sets are designed for a custom fit. The correct boots, correct length, for a perfect fit! Open the box and you can see the quality of our premiere line of spark plug wires.

Mallory Marine New Promaster® Spark Plug Wires Sets Performance Features

  • Ultra Low resistance spiral coredelivers high energy output for maximum spark at the plug
  • Excellent RFI / EMI suppression for even the most sensitive high tech on board electronics
  • 8 MM Ozone resistant blue silicone jacket repels water, oil, grease, fuel and withstands temperatures up to 500 degrees.
  • Top-of-the-Line Construction Features:

  • 100% Kevlar inner core for superior strength which virtually eliminates breakage
  • Layered inner carbon conductive element for excellent RFI / EMI suppression
  • Special Promaster® Mag COre SSC wire wrap provides extremely low resistance and faster current flow for hotter spark and longer spark duration
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from low resistance, high output Promaster® Mag Core
  • Tightly Woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer silicone jacket to increase wire strength and eliminate terminal pull-off
  • 100% Silicone jacket and boots provide superior protection against chemicals, oils, moisture, and abrasion
  • Ready to install and custom fit for your specific application