Outboards - Ignition

1" NPT Stainless Steel Water Shut-Off Valve
Your Price:
$59.95

1" NPT Stainless Steel Water Shut-Off Valve

620-913310

1" Stainless Steel Full-Port Ball Valve

FNPT by FNPT Threaded Ends, 2-Piece Body, Full-Port Design with lockable handle, 2000 PSI rated, 316 Stainless Steel Body, Teflon (PTFE) Seals & Seats.


1-1/4" NPT Stainless Steel Water Shut-Off Valve
Your Price:
$87.99

1-1/4" NPT Stainless Steel Water Shut-Off Valve

620-913315

1-1/4" Stainless Steel Full-Port Ball Valve

FNPT by FNPT Threaded Ends, 2-Piece Body, Full-Port Design with lockable handle, 2000 PSI rated, 316 Stainless Steel Body, Teflon (PTFE) Seals and Seats.


3/4" NPT Stainless Steel Water Shut-Off Valve
Your Price:
$59.90

3/4" NPT Stainless Steel Water Shut-Off Valve

620-913320

3/4" Stainless Steel Full-Port Ball Valve

FNPT by FNPT Threaded Ends, 2-Piece Body, Full-Port Design with lockable handle, 2000 PSI rated, 316 Stainless Steel Body, Teflon (PTFE) Seals & Seats.


Bulk Ignition Wire 25” Roll
Your Price:
$26.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Bulk Ignition Wire 25" Roll

676-9-28121

Bulk Ignition Wire 25” Roll (tinned copper core).

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Plug Wire Kit (tinned copper core)
Your Price:
$35.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Plug Wire Kit (tinned copper core)

676-9-28120

Plug Wire Kit (tinned copper core wire)
Fits:Outboard niversal Applications.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Polished Billet Exhaust Header Water Control Valve
Your Price:
$129.99

Polished Billet Exhaust Header Water Control Valve

620-100P

  • Polished Billet Aluminum Construction.
  • 1/4" NPT female pipe thread on the inlet and outlet.
  • Easy Manual Control of water flow through headers.
  • 4 Positions.

Spark Plug Boot and Spring Clip
Your Price:
$3.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Spark Plug Boot and Spring Clip

676-9-28124

Spark Plug Boot
Fits: Outboard Universal Applications Spring Clip and Boot.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Spark Plug Boot and Terminal.
Your Price:
$4.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Spark Plug Boot and Terminal.

676-9-28123

Spark Plug Boot
Fits: Outboard Universal Applications Boot and Terminal.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.


Spark Plug Wire Terminal
Your Price:
$1.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Spark Plug Wire Terminal

676-9-28122

Spark Plug Wire Terminal
Fits: Outboard Universal Applications.

Mallory Marine's new Outboard Spark Plug Wires and Leads are constructed with only the best premium quality materials you would expect from the ignition leader. Built specifically for Outboard applications utilizing Packard 440 tin plated copper wire, that are designed for a precise fit.
Mallory Marine Outboard Spark Plug Wires Performance Features:

  • Ultra low resistance tin plated copper core delivers high energy output for Maximum spark at the plug.
  • Meets SAE J2031 standards, rated for up to 40,000 volts.
  • 7 MM Ozone resistant jacket repels water, oil, grease, and fuel.
Top-of-the-Line Construction Features:
  • Tin plated copper core for superior corrosion resistance
  • Tin plated copper core also provides extremely low resistance and faster current flow for hotter spark and longer spark duration.
  • High density Ethylene-Propylene Diene Monomer (EPDM) to eliminate bleed through from core.
  • Tightly woven fiberglass braid forms a permanent bond between the EPDM inner layer and the outer jacket to increase wire strength
  • 100% Silicone boots provide superior protection against chemicals, oil, moisture, and abrasion.
  • Ready to install and custom fit for your specific application.