XRP Fittings

Red Anodized Single & Dual Feed Holley,Demon,Carter,Werber,Solex Carburetor fittings. Crush washer included with all fittings!

Red Anodized Fuel Pressure Take-Off Adapters w/ 1/8” Female NPT Port. Excellent for fuel and oil gauges where a pressure sending unit needs to be added.

Red Anodized Hex Hose Finisher. XRP anodized aluminum hose finishers add cosmetic appeal to your engine. A unique design ensures a secure placement of the worn gear clamp. Machined from the finest aluminum alloy, and are supplied with a stainless steel worm gear clamp pre-installed.

Red Anodized Straight Male AN Thread to AN Hose End. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose. These are designed to allow the hose end to be directly into female port without the bulk and complication of an adapter fitting.

Red Anodized Tube Nut. Used in conjunction with tube sleeve to attach AN fittings to tubing

Red Anodized Tube Sleeve. Used in conjunction with tube nut to attach AN fittings to tubing

Red/Blue Anodized XRP 120° with Aviation-style nipple and cutter design which prevents blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose.

Red/Blue Anodized XRP 120° Non-Swivel Aluminum Performance Hose Ends are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends. To many top race teams, no other style is acceptable. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°. Must be orientated to the correct angular position during hose assembly.

Red/Blue Anodized XRP 150° with Aviation-style nipple and cutter design which prevents blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose.

Red/Blue Anodized XRP 150° Non-Swivel Aluminum Performance Hose Ends are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends. To many top race teams, no other style is acceptable. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°. Must be orientated to the correct angular position during hose assembly.

Red/Blue Anodized XRP 180° with Aviation-style nipple and cutter design which prevents blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose.

Red/Blue Anodized XRP 180° Non-Swivel Aluminum Performance Hose Ends are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends. To many top race teams, no other style is acceptable. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°. Must be orientated to the correct angular position during hose assembly.

Red/Blue Anodized XRP 30° with Aviation-style nipple and cutter design which prevents blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose.

Red/Blue Anodized XRP 30° Non-Swivel Aluminum Performance Hose Ends are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends. To many top race teams, no other style is acceptable. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°. Must be orientated to the correct angular position during hose assembly.

These XRP 45° Double Swivel Triple Sealed Hose ends are Red/Blue Anodized and have an Aviation-style nipple and cutter design, prevent blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose. -4 and -20 ends are not available in double swivel, only non-swivel.

These XRP 45° Double Swivel Triple Sealed Forged Hose ends are Red/Blue Anodized and Aviation-style nipple and cutter design, prevent blow off and leakage. These adapters are forged allowing for a more compact fitting over the tube design, at the expense of max flow rate. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose. These hose ends require no special tooling to assemble.

These 45° XRP Aluminum Performance Hose Ends are Red/Blue Anodized and are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends when assembled with stainless steel or nylon braided hose. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°.

Red/Blue Anodized XRP 60° with Aviation-style nipple and cutter design which prevents blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose.

Red/Blue Anodized XRP 60° Non-Swivel Aluminum Performance Hose Ends are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends. To many top race teams, no other style is acceptable. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°. Must be orientated to the correct angular position during hose assembly.

These XRP 90° Double Swivel Triple Sealed Hose ends are Red/Blue Anodized and have an Aviation-style nipple and cutter design, prevent blow off and leakage. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose. -4 and -20 ends are not available in double swivel, only non-swivel.

These XRP 90° Double Swivel Triple Sealed Forged Hose ends are Red/Blue Anodized and Aviation-style nipple and cutter design, prevent blow off and leakage. These adapters are forged allowing for a more compact fitting over the tube design, at the expense of max flow rate. Design allows for full angular positioning after assembly. These fittings feature the latest in racing plumbing. All hose ends are JIC 37°. Compatible with Stainless Steel CPE race hose and XR-31 hose. These hose ends require no special tooling to assemble.

These 90° XRP Aluminum Performance Hose Ends are Red/Blue Anodized and are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends when assembled with stainless steel or nylon braided hose. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°.

Red/Blue Anodized AN Female to Female Swivel Coupling.

These XRP Aluminum Performance Hose Ends are Red/Blue Anodized and are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends when assembled with stainless steel or nylon braided hose. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°.

Stainless Steel outer braid provides durability and heat resistance. Scientific elastomer, chlorinated polyethylene (CPE) inner tube provides broad race fluid compatibility. This hose is known for its superior outer braid adhesion, making it easy to assemble. Shown with Red/Blue and Super Nickel AN Hose Ends, which are not included. Temperature Range is -40°F to 300°F. See Specifications Tab for Max Pressures

Stainless Steel Braided Hose is Sold by the foot, i.e. add quantity 6 for 6ft. Of hose.

Hose comes in maximum of 25 feet sections. Please specify if you want sections cut into specific lengths when ordering over 25 feet.