625-2122 Brazil Valve Fitting, 1/8" NPT x -6 AN, Brass (Each)
Replacement fittings for Brazil Valve Manifold. Sold Each.
|
|
135-1040 Brazilian
Steering Manifold
This adapter was designed to aid in the installation of
an add-on hydraulic steering system on boats
manufactured 1994 and later equipped with a Brazilian shuttle valve. Same as Imco HCK17. Manifold, Fittings and O-Rings included. See related parts for replacement parts if needed.
|
|
620-154022 Valve Cover Accessories - Breather Extension (2 Required)
- The caps and extensions are CNC machined from billet aluminum and both seal with an O-ring.
- 16 male thread to valve cover.
- 1" NPT female into top of breather.
- Fits 1-1/2" clamp on breathers
|
|
620-70184 Breather Grommet With An Integral Baffle - Each - If your experiencing oil blow by problems these baffled breather grommets could be the answer. Each grommet features an integral baffling for oil while still providing adequate engine breathing and venting.
- Grommet has 1.125" hole.
|
|
620-45762 Breather Splash Cover, fits breathers with mounting center to center of 2" to 2.5".
|
|
137-8256 Bulkhead Mount Bracket For Trim Pumps - Includes (2) 12 Volt Solenoids and Stainless Steel Bolts
Bulkhead mounting bracket for trim pumps. Supplied with stainless steel bolts.
Black hard coat anodized finish for the ultimate in corrosion protection.
|
|
137-8208
- For Mercury #6 / Speedmaster Drive Applications
- High Pressure Race Application Pump
- Includes Heavy Duty Black Billet Aluminum Bulkhead Trim Pump Bracket
- Pump comes complete with Solenoids,
- All stainless steel hardware is included
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Uses 10w30 oil
|
|
137-8214
- For Mercury K-Plane Trim Tabs
- High Pressure Race Application Pump
- Includes Heavy Duty Black Billet Aluminum Bulkhead Trim Pump Bracket
- Pump comes complete with Solenoids,
- All stainless steel hardware is included
- Uses 10w30 oil
|
|
137-8271 Bulkhead Mount Slide Bracket For Trim Pumps - Includes Solenoid Mounting Plate & (2) 12 Volt Solenoids and Stainless Steel Bolts Race style bulk head slide mounting brackets for trim pumps. Supplied with stainless steel bolts. Black hard coat anodized finish for the ultimate in corrosion protection.
|
|
137-8291 Bulkhead Mount Slide Bracket For Trim Pumps - Includes Solenoid Mounting Plate & (2) 24 Volt Solenoids and Stainless Steel Bolts Race style bulk head slide mounting brackets for trim pumps. Supplied with stainless steel bolts. Black hard coat anodized finish for the ultimate in corrosion protection.
|
|
137-8200
- For use with Mayfair Performance Trim Tabs
- 12v 3-Wire Trim Pump
- Bulkhead mount high performance trim pump.
- Pump comes complete with solenoids .
- Bracket is made of billet aluminum and are black anodized for protection.
- All stainless steel hardware is also included.
- Uses 10w30 oil
|
|
137-8206
- Replaces Trim Pump Assembly for Bravo/Alpha Drives
- Bulkhead Mount Billet Aluminum Bracket
- Bracket is anodized black for protection
- 12v, 3 Wire Trim Pump
- Includes Solenoid and Wire Harness
- All stainless steel hardware is also included.
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Thread size is -4 O-Ring to 7/16-20 thread, shown fittings not included.
- Uses 10w30 oil
|
|
137-8203
- For use with Mercruiser Speedmaster Drives
- High Pressure Race Application Pump
- 12v 3-Wire Trim Pump
- Bulkhead mount high performance trim pump.
- Pump comes complete with solenoids.
- Bracket is made of billet aluminum and are black anodized for protection.
- All stainless steel hardware is also included.
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Uses 10w30 oil
|
|
137-8210
- For use with Mercury K-Plane Trim Tabs
- 12v 3-Wire Trim Pump
- Bulkhead mount high performance trim pump.
- Pump comes complete with solenoids .
- Bracket is made of billet aluminum and are black anodized for protection.
- All stainless steel hardware is also included.
- Uses 10w30 oil
|
|
137-8270 Bulkhead Sliding Mount Bracket For Trim Pumps -
Race style bulk head slide mounting brackets for trim pumps. Supplied with stainless steel bolts.
Black hard coat anodized finish for the ultimate in corrosion protection.
|
|
410-301103
- -10 AN male fitting.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
|
|
410-301102
- -8 AN.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
|
|
620-45758 Burn Down Valve Cover Breather (Each)
The baffled burn down style breathers got their name because they aretraditionally used to route crankcase pressure to the exhaust system.Today they are commonly used to route to a puke tank. These breathersfeature a -16 AN thread for ease of plumbing. Fittings are sold separately.
- 3.875" bolt spread.
- 1.75" base width.
- 4.5" tall.
|
|
900-10F038BHS Button Head Bolt for Mayfair Trim Tabs
|
|
|
|
625-4536 Bypass Hose Kit GM LS1 - LS3 Thermostatic Cooling System
For use with 625-4530 Thermostatic Cooling System.
|
|
625-4609 Bypass Screw, Sand Strainer
|
|
128-5000S Replacement Bypass Spring for Sand Strainer
|
|
620-331538 Cable Clamp Shim Only
To be used in conjunction with 33 and 43 series cable clamps. Mounting holes are 1" on center.
|
|
610-1011 Cable Connection Kit for Foot Throttles
This is a replacement cable connection kit for the foot throttles 620-60213 Only. Fits 33C Cables with 10/32 threads.
Note - Does Not Fit: 620-60214
|
|
500-894002 Cam Drive Only, Ford 460
These cam drives bolt to the front of an engine's camshaft. The male
tab that protrudes from the drive is designed to fit most cam driven water
pumps.
|
|
625-4277 Fits Magnaflow, Ram Force pumps and more.
|
|