Mechanical Steering Systems - Steering Cable Kits

Jet Boat Cable Kit

Starting From:
$269.99

This Part has options, please click the button below to order.

Jet Boat Cable Kit

620-1000 + Option(s)

Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only.

Rack and Pinion Steering System

Your Price:
$159.99

Uflex Rack and Pinion Steering Cable Kit

620-3090

Uflex Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included.

This kit includes:

  • M86 - pre assembled helm with steering cable
  • G86 - shaft assembly
  • X34 - 90° bezel (diameter is 5 1/8")

Featuresand Technical Specifications:

  • All stainless steel cable output ends
  • Made exclusively in corrosion resistant materials
  • Optional 90° or 20° installation
  • Standard 3/4”tapered shaft
  • Lock-to-lock steering wheel turns: 3,5
  • Stroke: 8.2” (210 mm)
  • Maximum allowable steering wheel diameter: 16.5” (420 mm)
  • Minimum steering cable bend radius: 7,9” (200 mm)
  • G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
  • Exceeds EN 28848 safety standards
  • Exceeds ABYC P17 safety standards



Rotary Tilt Helm Upgrade
Your Price:
$159.99

Rack Tilt Helm Upgrade

620-309000

Rack Tilt Helm Upgrade

If you want the convenience of adding a tilt helm to your new or replacement Rack Steering Kit, then this is your answer! Note: This kit is only to be purchased alongside new replacement 620-3090XX Rack Steering Cable Kits.

Rotary Steering System

Your Price:
$159.99

Uflex Rotary Steering Cable Kit

620-3080

Uflex Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. 

This kit includes:

  • T71FC - helm
  • X34 - 90° bezel (diameter is 5 1/8")
  • M66 - steering cable

Features and Technical Specifications:

  • Cable Entry can be set from either Port or Starboard sides
  • Fast connect, simple installation
  • All stainless steel cable output ends
  • Corrosion resistant materials
  • Particularly suitable where clearance is limited
  • Optional 90° or 20° installation
  • Standard 3/4” tapered shaft
  • Lock-to-lock steering wheel turns: approx. 3,8
  • Stroke: 9” (228 mm)
  • Maximum allowable steering wheel diameter: 16” (406 mm)
  • Minimum steering cable bend radius: 7.9” (200 mm)
  • Minimal feedback
  • Compact for mounting
  • T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
  • For boats faster than 50 mph the twin cable steering system T72FC is recommended
  • Exceeds EN 28848 safety standards
  • Exceeds ABYC P17 safety standards


Rotary Tilt Helm Upgrade
Your Price:
$189.99

Rotary Tilt Helm Upgrade

620-308000

Rotary Tilt Helm Upgrade

If you want the convenience of adding a tilt helm to your new or replacement Rotary Steering Kit, then this is your answer! Note: This kit is only to be purchased alongside new replacement 620-3080XX Rotary Steering Cable Kits.

Teleflex "The Rack" Rack and Pinion Steering Cable Kit

Your Price:
$159.99

Teleflex "The Rack" Rack and Pinion Steering Cable Kit

464-SS141

Traditional SeaStar Solutions (formerly Teleflex Marine) mechanical rack steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required. The Back Mount Rack Steering System features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats.

Suitable For:
Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter. - SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).

Kit Contains the Following:
(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.

Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.

Note: SSC124xx Old Style Rack Cables cannot be used with these systems.
  • Precise, Easy 4 Turns Lock-to-Lock
  • Standard 3/4" Round Tapered Steering Shaft
  • Stainless Steel Cable Output Ends
  • Fast, Easy Installation: Back Mount Design Allows Quick Placement in Dash PLUS Mounting Hardware fits Old Teleflex and SeaStar Solutions Rack Holes
  • Meets A.B.Y.C. Standards
  • Meets N.M.M.A. Certification Requirements
  • Made, Designed and Assembled in the USA
  • Kit Sizes vary from 8 to 20 Feet

Teleflex Rotary Steering Cable Kit

Your Price:
$159.99

Teleflex Rotary Steering Cable Kit

464-SS137

Traditional SeaStar Solutions mechanical steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required.

Safe-T QC Offers the Quick Response of Three-Turn Steering, and Easy Installation with a Patented, No-Tools-Required Cable Connection at the Helm.

Suitable For:
Virtually all Single-Station Power-Assisted Sterndrive boats with wheels up to 16-inch diameter. - All SeaStar Solutions Safe-T Helms made since 1968 with little or no Dash Modifications.

Kit Contains the Following:
(1) SH5094-1P Helm; (1) SB27484P 90 Degree Bezel Kit; (1) SSC62xx Steering Cable; Hardware and Instruction Sheets.
  • Quick-Response of 3 Turns Lock-to-Lock
  • Standard 3/4" Round Tapered Steering Shaft
  • Stainless Steel Cable Output Ends
  • Fast, Easy Installation - Uses Simple Snap-In cable connection, SeaStar Solutions Quick Connect (QC) cable, and Industry-Standard Safe-T Mounting Hardware
  • All SeaStar Solutions Steering Cables exceed ABYC Safety Standards and ISO/IMCI/NMMA Certification.
  • Made, Designed and Assembled in the USA
  • Kit Sizes vary from 8 to 23 Feet

Rack and Pinion Steering System

Your Price:
$242.99

Rack and Pinion Steering System - Non Reversible

623-ACCUTECH

Uflex Non-Reversible Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Recommended for outboard applications or non power assisted sterndrives where there is limited space behind the dash, the Accutech features a patented spring clutch of the G88NR helm eliminates continuous loads while not actively changing direction. The M86 cable included with the Accutech has an armor wrapped stainless steel core for maximum efficiency and minimal lost motion.

This kit includes:

  • M86 - preassembled helm with steering cable
  • G86NR - shaft assembly
  • X34 - 90° bezel (diameter is 5 1/8")

Features and Technical Specifications:

  • All stainless steel cable output ends
  • Made exclusively in corrosion resistant materials
  • Optional 90° or 20° installation
  • Standard 3/4”tapered shaft
  • Lock-to-lock steering wheel turns: 3,5
  • Stroke: 8.2” (210 mm)
  • Maximum allowable steering wheel diameter: 16.5” (420 mm)
  • Minimum steering cable bend radius: 7,9” (200 mm)
  • G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
  • Exceeds EN 28848 safety standards
  • Exceeds ABYC P17 safety standards



Rotary Steering System

Your Price:
$240.99

Rotary Steering System - Non Reversible

623-ACCURA

Uflex Rotary Steering System Packaged in a Box - Non Reversible

With a patented spring clutch that Accura eliminates continuous loads on the steering wheel while the direction of the boat is not being actively changed, which is highly recommended for outboard and sterndrives without power assist. The T73FC helm included with the Accura package also features a Planetary Gear Design for smooth and more balanced steering effort. A direct drop in replacement for competing systems, the Accura comes with the M66 Universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included.

This kit includes:

  • T73NR FC - helm
  • X34 - 90° bezel (diameter is 5 1/8")
  • M66 - steering cable

Features and Technical Specifications:

  • Cable Entry can be set from either Port or Starboard sides
  • Fast connect, simple installation
  • All stainless steel cable output ends
  • Corrosion resistant materials
  • Particularly suitable where clearance is limited
  • Optional 90° or 20° installation
  • Standard 3/4” tapered shaft
  • Lock-to-lock steering wheel turns: approx. 3,8
  • Stroke: 9” (228 mm)
  • Maximum allowable steering wheel diameter: 16” (406 mm)
  • Minimum steering cable bend radius: 7.9” (200 mm)
  • Minimal feedback
  • Compact for mounting
  • T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
  • For boats faster than 50 mph the twin cable steering system T72FC is recommended
  • Exceeds EN 28848 safety standards
  • Exceeds ABYC P17 safety standards


Rotary Steering System
Starting From:
$435.99

This Part has options, please click the button below to order.

Dual Cable Rotary Steering System

623-ROTECHII + Option(s)

Uflex Dual Cable Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. 

This kit includes:

  • T72FC - helm
  • X34 - 90° bezel (diameter is 5 1/8")
  • M66 -  2 steering cables

Features and Technical Specifications:

  • Cable Entry can be set from either Port or Starboard sides
  • Fast connect, simple installation
  • All stainless steel cable output ends
  • Corrosion resistant materials
  • Particularly suitable where clearance is limited
  • Optional 90° or 20° installation
  • Standard 3/4” tapered shaft
  • Lock-to-lock steering wheel turns: approx. 3,8
  • Stroke: 9” (228 mm)
  • Maximum allowable steering wheel diameter: 16” (406 mm)
  • Minimum steering cable bend radius: 7.9” (200 mm)
  • Minimal feedback
  • Compact for mounting
  • T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
  • For boats faster than 50 mph the twin cable steering system T72FC is recommended
  • Exceeds EN 28848 safety standards
  • Exceeds ABYC P17 safety standards