Water Pump Parts - Volvo

4" Oval Billet Aluminum Flame Arrestor
Your Price:
$199.99

4" Oval Billet Aluminum Flame Arrestor

620-12673

4" Oval Billet Aluminum Flame Arrestor For Carbureted Engines

This new oval billet style flame arrestor is perfect for someone looking for a modern oval style flame arrestor at an affordableprice. The highly polished base and top sandwich a K&N flame arrestor in a sleek and compact package 12" long by 8-1/2" wide. Available only in the popular 5-1/8" inlet 4150 single carburetor application.


5-3/4" x 1-5/8" Tall Flame Arrestor, Aluminum
Your Price:
$37.99

5-3/4" x 1-5/8" Tall Flame Arrestor, Aluminum

690-571501A

5-3/4" OD x 1-5/8" Tall Flame Arrestor, Aluminum

This low profile USCG Approved flame arrestor is designed to fit all carburetors with a 5-1/8" air horn or neck. This unit has a 5-3/ 4" outside diameter and is 1-5/8" tall. This unit is constructed of aluminum and is not recommended for saltwater applications. This flame arrestor fits only the Quadrajet and Edelbrock 4bbl. carburetors it does not clear the Holley or Quickfuel J-tubes.


5-3/4" x 4" High Flame Arrestor with Vent Tube, Aluminum
Your Price:
$39.99

5-3/4" x 4" High Flame Arrestor with Vent Tube, Aluminum

690-573010A

5-3/4" x 4" High Flame Arrestor with Vent Tube, Aluminum

  • Each unit is designed to fit a standard 5-1/8" carburetor neck
  • outside dimension is 5-3/4"
  • The 3" tall version has no fuel fume vent
  • The 4" tall and has a fuel fume vent provision
  • Outer Vent Tube Diameter: 1/4"

These flame arrestors both feature an aluminum mesh style USCG Approved construction Each unit is designed to fit a standard 5-1/8" carburetor neck while their outside dimension is 5-3/4". The 3" tall version has no fuel fume vent and fits perfectly inside most aluminum scoops. While the other version is 4" tall and has a fuel fume vent provision.
Outer Diameter on the vent tube is 1/4" to match the fuel pumps its designed to attach to.


8" x 2" Tall, Polished Stainless Steel Flame Arrestor
Your Price:
$109.99

8" x 2" Tall, Polished Stainless Steel Flame Arrestor

690-850-8-2

Polished Stainless Steel Flame Arrestor - 5-1/8" Flange
8" OD x 2" Tall (No Vent Tubes)

These flame arrestors feature a stainless mesh style. USCG approved construction. We have units designed to fit standard 5-1/8"(std Holley 4150) carburetor necks. Overall height is 2 3/4".
While outside dimensions range to accommodate many needs larger diameter units flow much more air on performance applications.

**NOTE VENT TUBES SOLD SEPARATELY**


Extreme Custom Billet Flame Arrestor - Single 10" Diameter Holley 4150/4500 or Demon, 3" Tall
Starting From:
$339.99
This Part has options, please click the button below to order.

Billet Flame Arrestor - Single 10" Diameter Holley 4150/4500, 3" Tall

625-517 + Option(s)

Extreme Custom Billet Flame Arrestor - Single 10" Diameter Holley 4150 or Demon, 3" Tall

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine! For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidly on unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestor is built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

If you would like to order Flame Arrestor built to your custom dimensionsclick hereto download the worksheet.


HP 525 Flame Arrestor
Starting From:
$599.99
This Part has options, please click the button below to order.

HP 500 Flame Arrestor

625-526 + Option(s)

HP 500 Flame Arrestor - Polished or Blue Anodized

If you've ever wondered how that small factory flame arrestor supported enough air flow for you Mercury Racing HP500 engine then you're not alone.. Truth be told these engines hunger for improved air flow, so the folks at Hardin Marine set out to build what would become not only the answer but a part that beams of jewel like beauty when mounted to the engine. Constructed from the finest aluminum and stainless steel materials, Hardin was able to match their proven high flow air screen pack with a high flow velocity stack type air inlet to create the ultimate flame arrestor. Boasting more than 60% more air inlet surface area, these units will now support air flow needs of up to 900 horsepower. So whether you want to own the hottest looking flame arrestor for appearance reasons or performance reasons, Hardin marine has it.

Note: Blue Anodized is a custom option and takes 7-10 Days to ship.

FITMENT Note: This does not fit on OEM throttle bodies. Only fits 620-15530 throttle body upgrade. See related parts.

HP 525 Flame Arrestor
Starting From:
$599.99
This Part has options, please click the button below to order.

HP 525 Flame Arrestor

625-525 + Option(s)

HP 525 Flame Arrestor - Polished or Blue Anodized

If you've ever wondered how that small factory flame arrestor supported enough air flow for you Mercury Racing HP525 engine then you're not alone.. Truth be told these engines hunger for improved air flow, so the folks at Hardin Marine set out to build what would become not only the answer but a part that beams of jewel like beauty when mounted to the engine. Constructed from the finest aluminum and stainless steel materials, Hardin was able to match their proven high flow air screen pack with a high flow velocity stack type air inlet to create the ultimate flame arrestor. Boasting more than 60% more air inlet surface area, these units will now support air flow needs of up to 900 horsepower. So whether you want to own the hottest looking flame arrestor for appearance reasons or performance reasons, Hardin marine has it.

Note: Blue Anodized is a custom option and takes 7-10 Days to ship.

HP 525 Flame Arrestor
Starting From:
$599.99
This Part has options, please click the button below to order.

HP600 / 700 EFI Flame Arrestor

625-527 + Option(s)

HP 600 / 700 EFI Flame Arrestor - Polished or Blue Anodized

Whether your trying to let your HP600EFI or HP700EFI Supercharged engine finally get the amount of air its yearning for or your adding the performance enhancement kit or just realize your show piece of an engine deserves a piece of equipment that looks like the jewelry it deserves Hardin Marine has built the ultimate supercharged flame arrestor for it.Constructed from the finest 6061-T6 Billet aluminum and stainless steel materials, Hardin was able to match their proven high flow air screen pack with a high flow velocity stack type air inlet to create just what your engines looking for to obtain maximum performance. This unit boasts more than 60% more air inlet surface area, these units will now support air flow needs of up to 900 horsepower. So whether you want to own the hottest looking flame arrestor for appearance reasons or performance reasons, Hardin marine has it. 

Note: Product is shown mounted on throttle body which is NOT included. Blue Anodized is a custom option and takes 7-10 Days to ship. 

Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall
Starting From:
$499.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Dual 4150/4500, 2" Tall

625-52 + Option(s)

Extreme Custom Billet Flame Arrestor - Dual 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 2" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidly on unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestor is built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall
Starting From:
$499.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall

625-51 + Option(s)

Extreme Custom Billet Flame Arrestor - Dual 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


Oval Billet Flame Arrestor - Dual 4500, 2" & 3" Tall, 8-3/4" Center
Starting From:
$499.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Dual, 3" Tall, 8-3/4" Center

625-51 + Option(s)

Oval Billet Flame Arrestor - Dual 4150/4500 3" Tall, 8-3/4" Center

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with your logo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


Oval Billet Flame Arrestor - Dual 4150, 2" & 3" Tall, 8-5/8" Center
Starting From:
$499.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Dual, 3" Tall, 8-5/8" Center

625-51 + Option(s)

Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall, 8-5/8" Center

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with your logo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall
Starting From:
$439.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Single 4150/4500, 2" Tall

625-52 + Option(s)

Extreme Custom Billet Flame Arrestor - Single 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall
Starting From:
$439.99
This Part has options, please click the button below to order.

Oval Billet Flame Arrestor - Single 4150/4500, 3" Tall

625-51 + Option(s)

Extreme Custom Billet Flame Arrestor - Single 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.


SS Super Sport Series Flame Arrestor
Your Price:
$169.99

SS Super Sport Series Flame Arrestor

620-12664

"SS" Super Sport Series Flame Arrestor For MerCruiser Magnum MPI 

Hardin Marine and K&N Engineering have teamed up to bring you an affordable entry level performance filter/flame arrestor kit that bolts directly to your Mercury Magnum series engine throttle body. The expanding shape of this intake assures increased air speed, something that block-like aluminum adapters can't do. Just clamp on the K&N flame arrestor and you're ready to go.

Note: These clamp-on filter/flame arrestors have limitations to their air flow capability. The filter element can only support enough air flow for approximately 500 horsepower.

Includes the mounting bolts.


Water Pump Repair Kit Volvo 875574-6
Your Price:
$101.99

Normally Ships in 7-10 Days. Rush proccessing is available on Mallory items: See here.

Water Pump Repair Kit Volvo 875574-6

676-9-45705

Water Pump Repair Kit
Replaces: Volvo 875574-6
Fits: AQ120B, 125A, B, 131A, 140A, 145A, B, 151A, B
Mallory Marine water circulating pumps are manufactured to the highest quality standards. All of the circulating pumps are bi-directional so one part number will fit both standard and opposite rotation engines.

    Features:
  • Meets all OEM dimensional specifications
  • High quality castings with premium coatings to resist corrosion
  • Marine grade brass impellers, fittings, and plugs
  • Highest quality seal available for extended service life. The seal utilizes a carbon phenolic primary ring and nitrile billows to resist chemical and harsh conditions better than the competition
  • All mounting gaskets are included