Extreme Custom Billet Flame Arrestor - Single 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

Imco Tie Bar Replacement Part. 2 per clevis joint, 4 per tie bar/ steering ram assembly. Sold and priced in a package of 4 each

High Vibration Electric Fuel or Water Pressure Sender
0-15 PSI, 1/8" NPT for FULL SWEEP Autometer Gauges

Quite possibly one of the most important things to monitor while making those high speed runs. Everyone knows fuel pressure is critical so always run the correct senders to watch your gauge. All senders are 1/8" NPT. This sender is used for full sweep Autometer pressure gauges.

High Vibration Electric Fuel or Water Pressure Sender
0-100 PSI, 1/8" NPT for FULL SWEEP Autometer Gauges

Quite possibly one of the most important things to monitor while making those high speed runs. Everyone knows fuel pressure is critical so always run the correct senders to watch your gauge. All senders are 1/8" NPT. This sender is used for full sweep Autometer pressure gauges.

500 Gallon Per Hour Bilge Pump

These Bilge Pumps are made in America, and are of top quality These pumps meet all necessary USCG requirements and are tested and specified by over 200 boat manufacturers.

750 Gallon Per Hour Pump

These Bilge Pumps are made in America, and are of top quality These pumps meet all necessary USCG requirements and are tested and specified by over 200 boat manufacturers.

Dart Iron Eagle Big Block Chevy Cylinder Heads - 345cc Hydraulic Roller Cam Parts Kit

Final Assemblies Require Parts Kit which includes valve springs, retainers, locks, seals, studs & guideplates.

1/4" - 3" Super Speedmaster Outdrive Spacer

BBlades is proud to offer the latest in offshore sterndrive tuning with the release of there billet #VI Super Speedmaster Outdrive Spacer Kits!

Discriminating performance boaters have new options for dialing-in their Mercury Racing (#6) SSM VI-Drive-powered boats; six new options, to be precise, thanks to the recently released VI-Drive spacers from BBlades Professional Propellers.

BBlades is the only manufacturer offering SSM VI-Drive spacers in quarter-inch increments, ranging from ¼-inch to 3-inches. All other manufacturers only offer spacers in half-inch increments. “While a quarter-of-an-inch may not sound like much to the uninformed, an experienced boat rigger knows that each boat and each boat set-up is different,” says Brett Anderson of BBlades. “As a result, the ‘one size fits all’ mentality of some manufacturers does not meet the needs of the performance boater looking for the ultimate set-up and optimum performance.”

Spacers allow for adjusting the “X” dimension of a sterndrive. By changing the depth of the propeller in the water. Raising the “X” dimension generally will increase speed, while lowering the “X” dimension can improve handling or boat attitude.

BBlades’ VI-Drive Spacer Kits are CNC machined from solid billet aluminum and come complete with everything needed for installation: spacer plate, studs, nuts, washers, O-ring, oil transfer tube and grounding strap.

Dealer inquiries and pricing are available.

HTR II, SHIFT SHAFT

SHIFT SHAFT ASSEMBLY, HTR II