Xtreme Series Valve Cover System, 1 Billet Oil Plug, 2 Breather Extensions and Filtered Breathers Included (pair)

Included:
• (1) Xtreme Series Valve Covers 620-44051
• (2) Breather Extension 620-154022
• (2) 1-1/2" Clamp-On Valve Cover Breather 620-70153
• (1) Bolt Kit 620-44005

A number of companies have tried to copy this Hardin Marine cover by building sand cast copies. There's a difference if you look at their wavy, pin holed, porous covers you'll see that the Hardin Marine "XS" Xtreme cover is a beautiful die cast cover with no waves and no blemishes. So if you're looking for the best 1-piece cover this is it. This cover has been specially designed to fit marine Big Block Chevy engine with center rise exhaust. Angling one side of the cover helps to access the 2 lower center bolts while maintaining enough valve cover height to run roller rockers and stud girdles. One of the covers has a billet screw in -16 AN oil fill.

These use valve covers that are raw/unpolished.

Spud Nut 5/8-18 thin Nylock Nut S/SSpud Nut 5/8-18 thin Nylock Nut S/S (Holds clevis joint to saddle)

Rod End Nut 5/8-18 Thin Nut S/SRod End Nut 5/8-18 Thin Nut S/S

1/4" I.D Vent / Bilge Hose

This hose is commonly used for venting or bilge dump.

Vent / Bilge hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

Hose comes in maximum of 50 feet sections. Please specify if you want sections cut into specific lengths when ordering over 50 feet.

Marine Fuel Line Hose 1/4" I.D.

This is true USCG approved marine grade fuel hose Don't take any chances with your investment Use only marine grade hose.

Fuel line hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

Hose comes in maximum of 50 feet sections. Please specify if you want sections cut into specific lengths when ordering over 50 feet.

Marine Fuel Line Hose 1/2" I.D.

This is true USCG approved marine grade fuel hose Don't take any chances with your investment Use only marine grade hose.

Fuel line hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

Hose comes in maximum of 50 feet sections. Please specify if you want sections cut into specific lengths when ordering over 50 feet.

Billet Aluminum Trim Tank Reservoir, Platinum

Here is the latest evolution of billet trim tank reservoirs and brackets. Hardin Marine continues to bring  new innovations to what seems like an already perfect product. These tanks are available in both standard and large tank only versions as well as in a stainless steel bracket floor mount or bulkhead mount version. Innovative features include billet leak proof caps, o-ring sealed housings, easy see through reservoirs for zero effort fluid monitoring.

"Basic" MSD Ignition Package - Ford 429/460 V8

This standard basic version of the popular "MSD" ignition system offers some great economic options to boaters. The basic kit consists of the following components:

• (1) MSD 85806 Pro-Billet Marine Distributor
• (1) MSD 6560 6-M Series Multi-Spark Ignition Control Box
• (1) MSD 8202 Standard Blaster Coil
• (1) Hardin Marine 8 MM Spark Plug Wire Set

Over our 40 years of engine development we have worked with some of the worlds most innovative and technologically advanced company's. From those relationships came many new alliances and product advancements such as the introduction of the "multiple spark discharge" ignition systems from Autotronics Controls. This advanced technology has produced an ignition system powerful enough to prevent spark plug fouling, faster RPM advancement, quicker acceleration, and increased peak horsepower, while greatly improving the overall drivability of any boat yet tough enough to withstand the harshest marine environments. These systems are 100% certified for marine use to comply with all USCG requirements. We are proud to be able to off to you the finest marine ignition system available today.

1-1/4" Pressure Relief Valve Fitting For Inline Use, 1/2" NPT

This valve should be used in conjunction with the 128-5000 pop off valve.

O/B Starter Motor, Yamaha

• NEW Complete
• Fits Yamaha Outboard 60-90 HP
• Replaces Yamaha #'s 6H3-81800-10 & 6H3-81800-11
• Replaces Hitachi #'s S108-97 & -97A

View API Outboard Starter Catalog
OEM to API Part Number Cross Reference

Small Block Chevy 2 bolt main - HP Series Hex Bolts

Far superior to any other bolt kit offered. Forged from 8740 chrome moly, all bolts feature generous under-head radius. The threads are rolled after heat-treating, giving them about 1000% longer fatigue life than most main bolts. Nominal rating of 180,000 psi. Parallel-ground, hardened washers are included with each kit.