Items Per Page:
161 Results (Viewing 1 - 12 of 161)
Big Block Ford Intake Manifold Stainless Steel Allen Bolt Kit
Your Price:
$30.99

Big Block Ford Intake Manifold Stainless Steel Allen Bolt Kit

620-52101

Big Block Ford 429/460 Intake Manifold Stainless Steel Allen Bolt Kit

We offer a full selection of intake manifold bolt kits to fit most popularmarine engines. These kits come complete with the correct number of bolts andstainless steel washers. Don't install your new intake manifold with anythingless.

18" Stroke Super Duty Hydro-Hatch Lift, 500 Pound Moving Capacity
Your Price:
$629.99

18" Stroke Super Duty Hydro-Hatch Lift, 500 Pound Moving Capacity

620-921018

  • Marine grade stainless steel & aluminum construction
  • 12 DC sealed electric motors, 2-wire simple hook-ups
  • Compact Size, Light Weight, for Maximum Lifting Capacity
  • Two Standard Length Cylinders with Simple Pin Mounts
  • Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
  • Smooth Quiet Responsive Hydraulic Action with No-Coasting
  • Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
  • 1” Cylinder. 
  • System is virtually maintenance free
  • Operating Temperatures 10 to 165 Degrees F
  • System can Operate with Environmentally Responsible Fluid
  • 18" Model  Dimensions: 26” Retracted Length, 44” Extended Length.
  • NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 
Hydraulic Hatch Ram Stop Collar
Your Price:
$32.99

Hydraulic Hatch Ram Stop Collar

620-921013

  • Lessens stress put on mounting bracket.
  • Prevents damage to your mounting bracket.
  • Stops the hatch ram from over-contracting.
  • Only to be used on 620-921018 and 620-921024.

ID: 1 1/4”
OD: 5/8”
400R Tie Bar Mount Bolt Kit
Your Price:
$129.99

400R Tie Bar Mount Bolt Kit

421-0199

PowerFlow S/B (Black Manifolds Only)
Your Price:
$1,839.99

PowerFlow S/B (Black Manifolds Only)

421-02-1015

Black Small Block Manifolds

Black Small Block Manifolds. (Sold in pairs)

These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.

Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized or polished in standard or recirc manifolds.

The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.

PowerFlow S/B (Polished Manifolds Only)
Your Price:
$1,783.99

PowerFlow S/B (Polished Manifolds Only)

421-02-1016

Polished Small Block Manifolds.

Polished small block manifolds. (Sold in pairs)

These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. Runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.

Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized or polished in standard or recirc manifolds.,/p> The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.

PowerFlow S/B Recirc (Black Manifolds Only)
Your Price:
$1,715.99

PowerFlow S/B Recirc (Black Manifolds Only)

421-02-1017

Black Small Block Recirculation Manifolds.

Black small block recirculation manifolds. (Sold in pairs)

These manifolds were designed for the water to recirculate or preheat (no water passes through riser pipe flange) high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. Runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.

Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized.

The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.

PowerFlow S/B Recirc (Polished Manifolds Only)
Your Price:
$1,783.99

PowerFlow S/B Recirc (Polished Manifolds Only)

421-02-1018

Polished Small Block Recirculation Manifolds.

Polished small block recirculation manifolds. (Sold in pairs)

These manifolds were designed for the water to recirculate or preheat (no water passes through riser pipe flange) high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. Runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.

Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized.

The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.

6 Port 3/4" - 1/2" Polished SuperFuel Valve
Your Price:
$1,086.99

6 Port 3/4" - 1/2" Polished SuperFuel Valve

421-06-2101

6 Port SuperFuel Valve

To view and download the PDF wiring diagram CLICK HERE

To view and download the PDF fuel line routing CLICK HERE

6 port

SuperFuel electric fuel selector valves are designed for high capacity flow. SuperFuel valves flow 325 gallons per hour at a 400-pound maximum operating pressure. Designed with a brass ball valve and 3/4" thru-hole for a non-restrictive flow on suction side, 1/2" thru-hole on return side. An internal micro switch allows you to read each fuel tank sender as you switch from one tank to the other. IMCO's unique mechanical override allows you to switch over in case of electrical failure. SuperFuel valves measure 4 1/2" Wide x 14 1/4" Long x 4 7/8" Deep, and 3/4" NPT Ports on bottom 1/2" Ports on top..

SCX, SCXT, SCT (1300) Lower Case
Your Price:
$1,804.99

SCX, SCXT, SCT (1300) Lower Case

421-01-1300

Lower Case

SCX, SCXT, SCT Lower Case

This part number is for case only, it does not include shafts, bearings, or hardware.

SCX, SCXT, SCT (1400) Extended Fin, Blue Printed Lower Case
Your Price:
$3,321.99

SCX, SCXT, SCT (1400) Extended Fin, Blue Printed Lower Case

421-01-1402

lue Printed Lower CaseSCX, SCXT, SCT Lower Case (1400) Extended Fin, Blue Printed This part number is for case only, it does not include shafts, bearings, or hardware.
SCX,SCXT, SCT (1400) Extended Fin Lower Case
Your Price:
$2,134.99

SCX,SCXT, SCT (1400) Extended Fin Lower Case

421-01-1400

1400 Lower CaseSCX, SCXT, SCT Lower Case (1400) This part number is for case only, it does not include shafts, bearings, or hardware.
161 Results (Viewing 1 - 12 of 161)