Items Per Page:
59 Results (Viewing 1 - 12 of 59)
Cyclone High Performance Bravo Exhaust System
Your Price:
$5,999.99

Cyclone High Performance Bravo Exhaust System

620-32025

Cyclone High Performance Bravo Exhaust System

The Cyclone HP Bravo exhaust system is a water jacketed wet style exhaust header. This system is an excellent choice for both stock and modified performance applications. The tailpipe design provides a steep angle and high centerline making the cooling water discharge resistant to water reversion, correcting what was a common problem in many HP 500 applications. This is the perfect replacement exhaust system for the HP500 style engine packages. This header mixes the engine cooling water with the exhaust near the end of the tailpipe which is then connected to a 4" rubber hose exhaust that connects to the transom mounted exhaust tips. Gaskets, and bolts are all included.

Hardin Marine 0-80 MPH Speedometer Gauge - 3-3/8"
Starting From:
$113.99

This Part has options, please click the button below to order.

Hardin Marine 0-80 MPH Speedometer Gauge - 3-3/8"

106-2025 + Option(s)

  • 3-3/8" 0-80 MPH Speedometer Gauge - White or Black
  • Very easy to read at high speeds
  • Handmade, hand calibrated, tested for accuracy and BUILT IN THE USA!!
  • Bold, Plastic body, clear dials, white back light, and a red competition style needle
  • Uses 1/8" Speedo Hose
  • Non-corrosive hardware and case
  • Gasket sealed lens and bezel to prevent fogging
  • 3-3/8" hole size, Outer diameter 3-7/8"
  • Not Designed to be used with Diesel Engines.

While some gauge distributors claim to manufacture as many as 95% of their gauges, we are proud to say that 100% of Hardin Marine speedometers are hand made, hand calibrated, and even tested to assure you're getting every last mile per hour out of your boat With bold, clear dials, incandescent flood lighting, and a red needle,these speedometers will be easy to read even at high speeds Speedometer pick-up tubes (pitot) sold separately. Hardin Marine gauges come with white light.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Power Take Off Adapter - Chevy 1310 Flywheel
Your Price:
$149.99

Power Take Off Adapter - Chevy 1310 Flywheel

500-2025

Power Take Off Adapters - Chevy 1310 Flywheel

Uses 3/8-24 bolts on 2" x 2-3/8" centers

Fits Small Block Chevy and Big Block Chevy with a two piece rear main seal. These flanges bolt on the flywheel and accept 1310 spicer drivelines.  There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.

Need help choosing your new PTO flange? Check out this handy tutorial!

Crossover Kit For Supercharged BBC Engines - Holley 250 & 420
Your Price:
$460.99

Crossover Kit For Supercharged BBC Engines - Holley 250 & 420

520-250BMKW

  • Custom designed crossover kit.
  • Allows the use of a thermostat or a kit with no thermostat.
  • Starboard inlet available by special order.
Crossover Kit For Supercharged BBC Engines - Holley 250 & 420
Your Price:
$391.99

Crossover Kit For Supercharged BBC Engines - Holley 250 & 420

520-250BMKWO

  • Custom designed crossover kit.
  • Allows the use of a thermostat or a kit with no thermostat.
  • Starboard inlet available by special order.
HARNESS REPAIR KT Mercruiser 84-8M0062025
Your Price:
$45.67

This Part has options, please click the button below to order.

HARNESS REPAIR KT Mercruiser 84-8M0062025

525-84-8M0062025

HARNESS REPAIR KT Mercruiser 84-8M0062025

Use when the replacement of the entire harness is not necessary. Includes the 10pin Can 1/P & H Resistor harness connector w/7 male pins and 7 crimp splices.
Fits: MCM 8.2L DTS engines Can 1/P & H restistor.

SCREW @5 Mercruiser 10-842025
Your Price:
$1.00

This Part has options, please click the button below to order.

SCREW @5 Mercruiser 10-842025

525-10-842025

SCREW (Priced Each. Must sell in quantities of 5) Mercruiser 10-842025

GASKET Mercruiser 27-8202581
Your Price:
$51.50

This Part has options, please click the button below to order.

GASKET Mercruiser 27-8202581

525-27-8202581

GASKET Mercruiser 27-8202581

PLUG Mercruiser 19-879172025
Your Price:
$3.30

This Part has options, please click the button below to order.

PLUG Mercruiser 19-879172025

525-19-879172025

PLUG Mercruiser 19-879172025

Replacement 850/1075 Mercury Racing Pump
Your Price:
$806.99

Replacement 850/1075 Mercury Racing Pump

450-DB2025A

This is a replacement 850/1075 Mercury Racing Pump

    Features:
  • All billet body pumps are 100% serviceable/repairable
  • Self Priming
  • Pump may be mounted above fuel cell vertical or horizontal mount
  • Breakaway coupling prevents pump/motor damage in the event of contamination
  • All internal wear components are 100% metallic
  • No plastics or composite materials. Our internal pumping elements are made of high speed tool steel and bronze. This results in the longest lasting, highest quality most durable pump available.
  • Body machined from billet aluminum
  • For carbureted or injected engines
  • Provides Consistent Performance with no fall-off in flow
  • Precise fuel delivery
  • Blades self-compensating for wear

  • Maximum HP:
    1400 hp @ 14V EFI (700 hp on Methanol)
    1600 hp @14V carb (800 hp on Methanol)
  • GPH/PSI Range:
    85-115 GPH/0-160 PSI
Illuminating Rocker Switches
Your Price:
$7.99

Illuminating Rocker Switches

464-420251-1

Rocker Switch Illuminated SPST RD

  • Circuit: SPST
  • Action: On/Off
  • Lens color: Red
Oil Seal
Your Price:
$6.99

Oil Seal

676-18-2025

Additional Details:

  • O.D.: 0.875"
  • Shaft Size: 0.500"
  • Width: 0.250"

Interchanges/Replaces

GLM

  • 86120

Johnson/Evinrude Outboard

  • 0318972

Mallory

  • 9-76201
59 Results (Viewing 1 - 12 of 59)