Items Per Page:
463 Results (Viewing 1 - 12 of 463)
Exhaust Cut-Out Kit
Starting From:
$1,399.99

This Part has options, please click the button below to order.

Single Engine Exhaust Cut-Out Kit

620-2000 + Option(s)

Single Engine "Silent Choice" Exhaust Cut-Out Kit - Captain's Call Replacement

Need the complete solution? The Exhaust Cut-Out Kit is your answer! Includes Tips, Diverters, Actuator, Hose and Clamps. Standard Kit includes two 8" long sections of 4" exhaust hose and straight cut tips. These kits are designed to be fitted in stock bravo exhaust locations. See this measurement sheet for more info. If you must place tips in a different location more hose and angle bends may be required. Call us if you need any assistance. Angle cut tips and longer hose available by special order.

These diverters will fit Bravo and Alpha applications 1987 and up they will not fit the 8.1 engines, OMC or Volvos. 

The Mercury 350 dry joint exhaust will not work with the Hardin diverter.
Corsa has a set part number 270-61000 for standard non riser spacers. If there is space, we need to know if it is 3" or 6" and Corsa can build a custom set.

Small Block Chevy '57-'95 Satin Intake Manifolds
Your Price:
$236.99

Small Block Chevy '57-'95 Polished Intake Manifolds

620-52000

Small Block Chevy '57-'95 Polished Intake Manifold, Idle to 5500 RPM

If you need  proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application.
12 Volt Receptacle
Your Price:
$5.99

12 Volt Receptacle

516-2000

Add a 12 volt receptacle to your boat so you can use 12v accessories such as battery / phone chargers
LED Push Button Switch Labels
Starting From:
$3.99

This Part has options, please click the button below to order.

Function Labels for 19MM Push Button Switches

516-9 + Option(s)

Function Labels for 19MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

Features & Benefits:
Marine Grade 6 Circuit Fuse Panel
Your Price:
$39.99

Marine Grade 12 Circuit Fuse Panel with LED's and Ground Screw

516-3200-0001

Marine Grade 12 Circuit Fuse Panel with LED Lights and Ground Screw
  • Clear insulating cover with label recesses accept Small Format Labels
  • Label Set included.
  • LED Indicator Lights
Hatch Ram Replacement Electric Motor
Your Price:
$39.99

Hatch Ram Replacement Electric Motor

620-920005

Replacement electric motor only. Fits many Livorsi hatch ram, Warner Hatch ram, Hardin Hatch ram and Thomson Hatch ram models. Mounting Bolt Center to Center is 2"

NOTE: These are NEW "Old Stock" Items and are NON-RETURNABLE. Make sure this will fit your application before purchasing!

Superduty Stainless Steel T-Bolt Band Clamps
Starting From:
$7.99

This Part has options, please click the button below to order.

Superduty Stainless Steel T-Bolt Band Clamps

100-720- + Option(s)

Superduty Stainless Steel T-Bolt Band Clamps

T-bolt clamps are the very best clamp money can buy. They are virtually impervious to harsh elements and are super-strong. If you want the best, use T-bolt clamps. Available in many sizes from 1" to 6"

  • 100-720-1000, use with 1" hard wall hose
  • 100-720-1060, use with 1-1/4" hard wall hose
  • 100-720-1120, use with 1-1/2" Fuel Fill hose
  • 100-720-2000, use with 2" Fuel Fill hose
  • 100-720-2120, use with 2-1/2" Water or Exhaust hose
  • 100-720-3000, use with 2-7/8" and 3" Exhaust hose
  • 100-720-3120, use with 3-1/2" Exhaust hose
  • 100-720-4000, use with 4" Exhaust hose
  • 100-720-4120, use with 4-1/2" Exhaust hose
  • 100-720-5000, use with 5" Exhaust hose
White Five Gauge Combo Set

Starting From:
$399.99

This Part has options, please click the button below to order.

Autometer Standard Size Single Inboard Engine Five Gauge Kit

865-200 + Option(s)

Don't be fooled by the name "AutoMeter" When we talk about "Marine Gauges" no one knows how to build more durable instruments than the guys that build nearly every racing gauge in the market today. The "MARINE DIFFERENCE" comes in the construction of a marine gauge . These gauges feature aluminum or plastic non-corrosive cases (automotive versions are steel). These marine gauges also use non-corrosive mounting hardware with weather resistant sealed lenses. Superior quality internal components and UV fade resistant race pointers insure accurate and rapid gauge response readings. Autometer comes with White Lights with Red and Green removable bulb covers.

Autometer Standard Size Single Inboard Engine Five Gauge Kits are available as shown below in White, Platinum, Chrome, and Carbon Fiber Varieties and include:

  • 3-3/8" 6000 or 8000 or 10000 RPM Tachometer
  • 2-1/16" Voltmeter
  • 2-1/16" Fuel Level
  • 2-1/16" Oil Pressure
  • 2-1/16" Water Temperature

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Trim 2-1/16" Gauge
Starting From:
$177.99

This Part has options, please click the button below to order.

Hardin Marine 0-6000 RPM Tachometer Gauge - 3-3/8"

106-2000 + Option(s)

  • 3-3/8" 0-6000 RPM Tachometer Gauge - White or Black
  • Very easy to read at high speeds
  • Handmade, hand calibrated, tested for accuracy and BUILT IN THE USA!!
  • Bold, Plastic body, clear dials, white back light, and a red competition style needle
  • Non-corrosive hardware and case
  • Gasket sealed lens and bezel to prevent fogging
  • 3-3/8" hole size, Outer diameter 3-7/8"
  • Not Designed to be used with Diesel Engines or Outboard Engines.

Hardin tachometers provide the ultimate in readability and accuracy. These tachometers feature non-corrosive hardware and gasket sealed lens and bezel to prevent fogging Each tachometer is built to withstand the severest of conditions. Each tachometer can be calibrated to work with 4, 6, and 8 cylinder engines. Hardin Marine gauges come with white lights.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Tool Kit Rental
Your Price:
$489.99

Berkeley Tool Kit Rental

150-2000

Berkeley Tool Kit Rental Program

You can now rent the Berkeley factory tool set to rebuild your jet drive in your garage. This rental kit will come with the impeller puller, impeller socket, bowl bearing removal and installation tool, seal drivers, and a splined shaft socket, to make quick work of the toughest parts of the rebuild process. You can now rent the tools used by Berkeley professionals for years at a fraction of the cost.

Rental Cost Breakdown:

  • $75.00 rental fee
  • $415.00 deposit required (plus sales tax if located in California or Florida) (Refunded when returned)
  • $150.00 late fee after 2 week rental period, not returnable after 30 days

Rental Terms

Rental period is for 2 weeks from time of delivery, tools returned late (after 15 days and before 30 days) are subject to a $150.00 late fee and are not returnable after 30 days. When tools are returned within the allowed time period you will be credited back $275.00 of your $350.00 deposit with the remaining $75.00 going to the rental fee. Any tools not returned or returned damaged will be deducted from the deposit at the current retail price.

Kit Includes:

Billet Bowl Stuffer
Your Price:
$209.99

Billet Bowl Stuffer

150-SF2000

Billet Bowl Stuffer

This billet aluminum stuffer mounts into the bowl directly behind the impeller. By closing up this clearance the hydro flow dynamics of the water exiting the impeller is substantially increased. The result is improved hole shot and acceleration.

Note: This bowl stuffer is for use with a non-shoulder wear ring.

Some machining may be required for installation.

High Speed Saginaw Style Power Steering Pump
Your Price:
$479.99

High Speed Saginaw Style Power Steering Pump

135-20000

High Speed Saginaw Style Power Steering Pump - 1500 PSI

This all new performance power steering pump is a direct replacement for most GM P-series Saginaw OEM power steering pumps. These pumps produce an increase of pressure thus aiding in low speed steering response.

NOTE: Reservoir is sold separately.

Why is this pump better?

  • The bearing snout is machined to replace the stock bronze bushing with #203 needle bearing.
  • The shaft is machined from 4140 tool steel and is heat treated to 75/80 Rockwell. Will not break if you dead head the pump.
  • The shaft has dual thrust washers to insure control forward and rear movement when under load.
  • The main boring housing is machined to a larger diameter to clean up wore surface. Larger ring, rotor and vanes are installed.
  • The main oil passage is enlarge for greater flow
  • Flow valve bore is machined larger. Unit comes with larger valve and spring.
  • Our pumps flows 4-3/4 to 5-1/4 GPM. Double the output than a stock Saginaw "P" series pump.
  • Comes with new o-rings for installation
463 Results (Viewing 1 - 12 of 463)