Service Manuals - Honda

1000 PSI Surge Brake System Hydrastar
Your Price:
$749.99

1000 PSI Surge Brake System Hydrastar

465-381-9065

HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,000 psi

    Specs:
  • Application: single- and tandem-axle trailers (up to 7,000 lbs) with drum brakes
  • Maximum output pressure: 1,000 psi
  • Power: 12V DC
  • Hydraulic port size: 3/16"
  • Actuator dimensions: 11-3/4" long x 3" wide x 7-3/8" tall
    • Actuator wire configuration:
    • Black: 12-volt power
    • Blue: brake controller
    • Yellow: breakaway
    • White: ground
  • Battery capacity: 5 amp-hours
  • Breakaway battery case dimensions: 5-7/16" long x 4-1/4" wide x 4-1/4" tall
  • Battery dimensions: 3-7/8" long x 3-1/2" wide x 2-11/16" tall
  • Breakaway switch lead wire length: 7-1/2"
  • Trailer connector length: 6'
    • Trailer connector wire gauges:
    • Black/white: 10 gauge
    • Blue: 12 gauge
    • Brown/red/green/yellow: 14 gauge
  • Junction box dimensions: 6-3/4" long x 3-1/2" wide x 2-1/4" tall
  • Split wire loom length: 6'

Note: Do not power wash the HydraStar actuator or take it through a commercial car wash. High-pressure water may damage the seals on the actuator.

The HydraStar electric-over-hydraulic trailer brake actuator applies pressure to your trailer's hydraulic brake system in response to the electrical signals sent from your in-cab brake controller. As a result, your trailer's hydraulic brakes will be activated every time you apply the brakes in your vehicle or press the manual override on your controller. This setup is ideal for boat trailers because you will get responsive hydraulic braking, which you control conveniently from inside your vehicle with your electric brake controller.


1200 PSI Surge Brake System Hydrastar
Your Price:
$749.99

1200 PSI Surge Brake System Hydrastar

465-381-9066

HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,200 psi

    Specs:
  • Application: single- and tandem-axle trailers (up to 7,000 lbs) with drum brakes
  • Maximum output pressure: 1,000 psi
  • Power: 12V DC
  • Hydraulic port size: 3/16"
  • Actuator dimensions: 11-3/4" long x 3" wide x 7-3/8" tall
    • Actuator wire configuration:
    • Black: 12-volt power
    • Blue: brake controller
    • Yellow: breakaway
    • White: ground
  • Battery capacity: 5 amp-hours
  • Breakaway battery case dimensions: 5-7/16" long x 4-1/4" wide x 4-1/4" tall
  • Battery dimensions: 3-7/8" long x 3-1/2" wide x 2-11/16" tall
  • Breakaway switch lead wire length: 7-1/2"
  • Trailer connector length: 6'
    • Trailer connector wire gauges:
    • Black/white: 10 gauge
    • Blue: 12 gauge
    • Brown/red/green/yellow: 14 gauge
  • Junction box dimensions: 6-3/4" long x 3-1/2" wide x 2-1/4" tall
  • Split wire loom length: 6'

Note: Do not power wash the HydraStar actuator or take it through a commercial car wash. High-pressure water may damage the seals on the actuator.

The HydraStar electric-over-hydraulic trailer brake actuator applies pressure to your trailer's hydraulic brake system in response to the electrical signals sent from your in-cab brake controller. As a result, your trailer's hydraulic brakes will be activated every time you apply the brakes in your vehicle or press the manual override on your controller. This setup is ideal for boat trailers because you will get responsive hydraulic braking, which you control conveniently from inside your vehicle with your electric brake controller.


1600 PSI Surge Brake System Hydrastar
Your Price:
$749.99

1600 PSI Surge Brake System HydraStar

465-381-9067

HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi

    Specs:
  • Application: single- and tandem-axle trailers (up to 7,000 lbs) with drum brakes
  • Maximum output pressure: 1,000 psi
  • Power: 12V DC
  • Hydraulic port size: 3/16"
  • Actuator dimensions: 11-3/4" long x 3" wide x 7-3/8" tall
    • Actuator wire configuration:
    • Black: 12-volt power
    • Blue: brake controller
    • Yellow: breakaway
    • White: ground
  • Battery capacity: 5 amp-hours
  • Breakaway battery case dimensions: 5-7/16" long x 4-1/4" wide x 4-1/4" tall
  • Battery dimensions: 3-7/8" long x 3-1/2" wide x 2-11/16" tall
  • Breakaway switch lead wire length: 7-1/2"
  • Trailer connector length: 6'
    • Trailer connector wire gauges:
    • Black/white: 10 gauge
    • Blue: 12 gauge
    • Brown/red/green/yellow: 14 gauge
  • Junction box dimensions: 6-3/4" long x 3-1/2" wide x 2-1/4" tall
  • Split wire loom length: 6'

Note: Do not power wash the HydraStar actuator or take it through a commercial car wash. High-pressure water may damage the seals on the actuator.

The HydraStar electric-over-hydraulic trailer brake actuator applies pressure to your trailer's hydraulic brake system in response to the electrical signals sent from your in-cab brake controller. As a result, your trailer's hydraulic brakes will be activated every time you apply the brakes in your vehicle or press the manual override on your controller. This setup is ideal for boat trailers because you will get responsive hydraulic braking, which you control conveniently from inside your vehicle with your electric brake controller.


4-Flat Car Only Connect 18"
Your Price:
$5.99

4-Flat Car Only Connect 18"

464-707275

4-Flat Car Only Connect 18"

Wesbar 4-Flat Car End Connectors are standard 4-way female harnesses with 18 gauge bonded wires. The wires have Taillight/Stop/Turn functions printed on them for easy identification. They conform to SAE Specification J1128 and have a maximum amperage of 7.5 per circuit.

  • 48" Long
  • 18" Ground

4-Flat Car Only Connectors
Your Price:
$7.99

4-Flat Car Only Connectors

464-707272

4-Flat Car Only Connect 6'

Wesbar 4-Flat Car End Connectors are standard 4-way female harnesses with 18 gauge bonded wires. The wires have Taillight/Stop/Turn functions printed on them for easy identification. They conform to SAE Specification J1128 and have a maximum amperage of 7.5 per circuit.

  • 6' Long
  • 6' Ground
  • Includes wire taps

4-Flat Wunside Connect 18"
Your Price:
$4.99

4-Flat Wunside Connect 18"

464-707285

4-FLAT WUNSIDE CONNECT 18"

The Wesbar 4-Flat Wunside Trailer End Connector is equipped with an 18" wunside harness and an 18" ground.


5-Flat Car Only Connect 6'
Your Price:
$7.99

5-Flat Car Only Connect 6'

464-707273

5-FLAT CAR ONLY CONNECT 6'

The Wesbar 5-Flat Car End Connector is 6' long with a 6' ground and auxiliary cable.


Adapter 7Way-5Way Flat "Stubby"
Your Price:
$17.99

Adapter 7Way-5Way Flat "Stubby"

464-767940

Adapter 7Way-5Way Flat "Stubby"

Wesbar Plug to Plug Adapters are available in a variety of combinations to fit and adapt most trailer connections. The "stubby" models are not equipped with an extension cable.


Adapter, Round 7W-5F Female 18"
Your Price:
$18.99

Adapter, Round 7W-5F Female 18"

464-707250

Adapter, Round 7w-5f Female 18"

Wesbar Plug to Plug Adapters are available in a variety of combinations to fit and adapt most trailer connections. The "stubby" models are not equipped with an extension cable. They feature simple plug-in installation.


Ball Mount 8-1/2"Lx2"Drop Black
Your Price:
$16.99

Ball Mount 8-1/2"L x 2"Drop Black

464-21342

Ball Mount 8-1/2"L x 2" Drop

Fulton Quick Loading Ball Mounts feature one-piece forged construction and an angled design. They are designed for Class IV hitches.

  • Finish: Black Powder
  • Length: 8-1/2"
  • Drop: 2"
  • TW/GTW: 750#
  • TW/GTW: 7500#

Ball Mount 9"Lx4"Drop Black
Your Price:
$19.99

Ball Mount 9"L x 4"Drop - Black

464-21344

Ball Mount 9" L x 4" Drop Black

Fulton Quick Loading Ball Mounts feature one-piece forged construction and an angled design. They are designed for Class IV hitches.

  • Finish: Black Powder
  • Length: 9"
  • Drop: 4"
  • TW/GTW: 750#
  • TW/GTW: 7500#

Ball Mount 9-1/2"Lx6"Drop Black
Your Price:
$24.99

Ball Mount 9-1/2"L x 6"Drop Black

464-21346

Ball Mount 9-1/2" L x 6" Drop Black

Fulton Quick Loading Ball Mounts feature one-piece forged construction and an angled design. They are designed for Class IV hitches.

  • Finish: Black Powder
  • Length: 9-1/2"
  • Drop: 6"
  • TW/GTW: 600#
  • TW/GTW: 6000#

Bent Pin Receiver Lock 5/8"
Your Price:
$12.99

Bent Pin Receiver Lock 5/8"

464-63223

Bent Pin Receiver Lock 5/8"

Fulton Bent Pin Receiver Locks fit crossways into the hole on trailer receivers and are secured with a deadbolt lock. They are constructed with a cast aluminum housing with chrome plating. The key slot has a dust cap to prevent corrosion and will fit Class I, II, III and IV hitches. 2 keys are provided.

  • 5/8" Pin fits 2"x2" receivers

Boat Guide Kit 44"
Your Price:
$87.99

Boat Guide Kit 44"

464-GB44

Boat Guide Kit 44"

Fulton Boat Guide Kits feature non-marring, marine grade PVC uprights that install on trailer frames up to 3" x 5" and do not require any drilling to mount. Each kit includes a pair of guides and U-bolt mounting hardware.

  • Size: 44" Upright height

Boat Guide Kit 50"
Your Price:
$91.99

Boat Guide Kit 50"

464-GB150

Boat Guide Kit 50"

Fulton Boat Guide Kits feature non-marring, marine grade PVC uprights that install on trailer frames up to 3" x 5" and do not require any drilling to mount. Each kit includes a pair of guides and U-bolt mounting hardware.

  • Size: 50" Upright height

Bow Eye Chr Znc 3/8"
Your Price:
$5.99

Bow Eye Chr Znc 3/8"

464-079133-1

Bow Eye Chrome Zinc 3/8"

The Seadog Bow Eye has a die cast zinc chrome plated head and a galvanized shaft.

  • 3/8" NC thread
  • 2-9/16" bolt length
  • 5-1/8" total length

Bow Eye Ss 1/2" X 3-7/16"
Your Price:
$14.99

Bow Eye SS 1/2" x 3-7/16"

464-080085-1

Bow Eye SS 1/2" x 3-7/16"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold.

  • Plate Size: 3" x 3/4"

Bow Eye Ss 3/8" X 3-1/2"
Your Price:
$7.99

Bow Eye SS 3/8" x 3-1/2"

464-080035-1

Bow Eye SS 3/8" x 3-1/2"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold


Coupler Lock Standard Brass
Your Price:
$9.99

Coupler Lock Standard Brass

464-63225

Coupler Lock Standard Brass

Fulton Coupler Locks attach to the coupler on a trailer to prevent theft when not attached to a receiver. The standard and adjustable models come in brass while the universal model comes in hi-vis yellow. All locks come with 2 keys.


Coupler Lock Universal Ylw
Your Price:
$20.99

Coupler Lock Universal Ylw

464-63226

Coupler Lock Universal Yellow

Fulton Coupler Locks attach to the coupler on a trailer to prevent theft when not attached to a receiver. The standard and adjustable models come in brass while the universal model comes in hi-vis yellow. Locks come with 2 keys.