Plumbing - Drain Plugs, Tubes and Accessories

1" Brass Turn-Tite"
Your Price:
$8.99

1" Brass Turn-Tite"

462-114-02089910

For mounting from inside transom. Fully adjustable, creates waterproof seal and will not leak or jar loose under vibration. Corrosion resistant construction. Designed for use with Moeller drain tubes. All come with neoprene seal.

Material: Brass, Fits: 1", Case: 6


AIR CHAMBER PLUG (MOELLER)
Your Price:
$8.99

AIR CHAMBER PLUG (MOELLER)

462-114-09080110

Fits: 5/8"

Sold: Each


Attwood 1" Drain Plug with Brass T-Handle"
Your Price:
$5.99

Attwood 1" Drain Plug with Brass T-Handle"

462-23-7526A7

Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Description: Brass handle, Fits: 1"


Attwood 1" Drain Plug with Stainless Steel Snap Handle"
Your Price:
$13.99

Attwood 1" Drain Plug with Stainless Steel Snap Handle"

462-23-7520A3

Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Description: Stainless Steel handle, Fits: 1"


Attwood 1" Drain Plug with Stainless Steel T-Handle"
Your Price:
$13.99

Attwood 1" Drain Plug with Stainless Steel T-Handle"

462-23-7518A3

Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Description: Stainless steel handle, Fits: 1"


Attwood Brass Snap-Handle Drain Plug Without Chain
Your Price:
$5.99

Attwood Brass Snap-Handle Drain Plug Without Chain

462-23-7524A7

Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Description: Brass handle, Fits: 1"

Sold: Each


Attwood Cast Bronze Garboard Drain Plug 1/2" NPT"
Your Price:
$16.99

Attwood Cast Bronze Garboard Drain Plug 1/2" NPT"

462-23-75553

Provides bilge drainage when hauling out. Nut removes with wrench or pliers. Machined, tapered pipe threads ensure watertight plug fit. 3/8" neck depth. Three countersunk holes for #8 screws.

Description: Drain & Plug, Material: Cast Bronze, Size: 1/2" NPT, Case: 6


Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle
Your Price:
$10.99

Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle

462-23-7533A7

Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.

Fits: "For 1/2" I.D. thru-hull"

Sold: Each


Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle
Your Price:
$11.99

Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle

462-23-7534A3

Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.

Fits: "For 5/8" I.D. thru-hull"

Sold: Each


Automatic Flapper Drain Plug Set
Your Price:
$26.99

Automatic Flapper Drain Plug Set

462-114-05101110

Flapper will automatically allow for water to drain from the hull when boat is under way
Water tight seal when the boat is at a stop
Flexible neoprene plug inserts in the transom drain hole

  • Flapper will automatically allow for water to drain from the hull when boat is under way

  • Water tight seal when the boat is at a stop

  • Flexible neoprene plug inserts in the transom drain hole

Fits: 1" standard drains to 2-1/4" thick transoms"

Sold: Each


Baitwell Plug 3/8" --2/Card"
Your Price:
$8.20

Baitwell Plug 3/8" --2/Card"

462-354-5200911

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Fits: 3/8", Pack: 2

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.


Beckson DP10 Screw Type 1" Drain Plug With Gasket, Black"
Your Price:
$9.99

Beckson DP10 Screw Type 1" Drain Plug With Gasket, Black"

462-35-DP10B

A screw-type with patented self-cleaning thread design. Ideal installation for transom of small boats, fish wells, coolers, ice chest, water tanks, etc. Part should be mounted in 1" ID hole with two stainless steel fasteners with gap in thread at lowest point. 1". Black. Includes gasket.


Boat Plug Pop Display
Your Price:
$239.00

Boat Plug Pop Display

462-354-5200415

"Has a flange diameter of 2". Pipe size is 1/2". Fastener is #8 FH. Bronze."

Description: P.O.P. Display - 30 Pcs., Size: 2" dia", Thread: 1/2" NPT"

Sold: Each


Brass Baitwell Plug - 1/2"
Your Price:
$7.90

Brass Baitwell Plug - 1/2"

462-354-5200921

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Fits: 1/2", Pack: 2

Sold: Pack


Brass Baitwell Plug - 3/4"
Your Price:
$8.80

Brass Baitwell Plug - 3/4"

462-354-5200941

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Fits: 3/4", Pack: 2

Sold: Pack


Brass Baitwell Plug - 5/8"
Your Price:
$8.80

Brass Baitwell Plug - 5/8"

462-354-5200931

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Fits: 5/8", Pack: 2

Sold: Pack


Brass Baitwell Plug - 7/8"
Your Price:
$9.30

Brass Baitwell Plug - 7/8"

462-354-5200951

Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Fits: 7/8", Pack: 2

Sold: Pack


Brass Drain Tube - 1" x 2-3/8"
Your Price:
$6.50

Brass Drain Tube - 1" x 2-3/8"

462-354-5202201

"Formed brass. 1" inside diameter."

Material: Brass, Size: 1" x 2-3/8" L"

Sold: Each


Brass Drain Tube - 1" X 2-7/8"
Your Price:
$7.25

Brass Drain Tube - 1" X 2-7/8"

462-354-5202301

"Formed brass. 1" inside diameter."

Material: Brass, Size: 1" x 2-7/8" L"

Sold: Each


Brass Drain Tube, 1 1/4" x 3"
Your Price:
$21.99

Brass Drain Tube, 1 1/4" x 3"

462-114-021253300D

"Special alloy. Flanged 90° one end. Functions as drain for transom, motor well, livewell or baitwell. Use similar metal between tubes and plugs. Designed for use with Moeller Snap-Tite, Turn-Tite and Trail 'n Bail Plugs. Wall thickness is .035". Length under flange given."

Material: Brass, Size: 1-1/4" OD x 3" L ", Case: 12