Propellers - Lenco Trim Tabs and Accessories

Auto Glide Automatic Trim Tab System w/o GPS & NMEA Network for Single Actuator
Your Price:
$1,486.19

Auto Glide Automatic Trim Tab System w/o GPS & NMEA Network for Single Actuator

462-622-15504101

"Advanced solid state electronics monitor your boat's systems and are constantly working to increase performance and economy. The system can be used in new or retrofit installations. The tabs are automatically deployed before taking off to reduce bow rise and time to plane. Once the boat is on plane it is automatically leveled and held there. It's that simple! Setup is simple and it can use some or all of the data from other devices such as GPS speed, engine RPM, fuel consumption, etc. to constantly maintain optimal running angles every time. Two preset manual positions can be stored for such things as rough water or different speeds. A special "hold" feature maintains the boat's planing position until it's powered off. Manual override is also simple; just tap the up or down buttons. All this is controlled from a single 6" x 6" x 2" fully submersible box that contains three gyros and three accelerometers with waterproof connections and components. Plug and play illuminating key pad control with deutsch connection. Interfaces with NMEA 2000 devices to show position information on other devices or to get information from them.
The Auto Glide system requires an NMEA 2000 GPS.
15504101 & 15505101: Do not include GPS antenna and are designed for boats with an existing NMEA 2000 network w/GPS.
Boat Must Be Equipped With Lenco Electric Trim Tabs

  • 12 and 24 volt compatible

  • Fast, easy installation

  • All plug & play connections

  • All waterproof, solid state components

  • Quick response. Built-in retractor for trim tabs in auto mode

  • Reads SmartCraft, NMEA 2000 & J1939 data

See Lenco's website at www.lencoautoglide.com for complete product descriptions, part number selection help, installation instructions, and operating instructions."

 

Boat Must Be Equipped With Lenco Electric Trim Tabs
  • 12 and 24 volt compatible

  • Fast, easy installation

  • All plug & play connections

  • All waterproof, solid state components

  • Quick response. Built-in retractor for trim tabs in auto mode

  • Reads SmartCraft, NMEA 2000 & J1939 data

See Lenco's website at www.lencoautoglide.com for complete product descriptions, part number selection help, installation instructions, and operating instructions.

Description: w/o GPS & NMEA Network, Fits: Single Actuator Tab System


Autoglide Control Box Mountng Bracket
Your Price:
$75.99

Autoglide Control Box Mountng Bracket

462-622-70568001

Autoglide Control Box Mountng Bracket. See Lenco's AutoGlide website for application information.

Description: Mounting Bracket for Control Box

Sold: Each


Autoglide Control Box, Single Actuator
Your Price:
$817.69

Autoglide Control Box, Single Actuator

462-622-30255001

Boat must be equipped with Lenco Electric Trim Tabs
All plug & play connections, All waterproof, solid state components
Reads SmartCraft, NMEA 2000 & J1939 data

  • Boat must be equipped with Lenco Electric Trim Tabs

  • All plug & play connections, All waterproof, solid state components

  • Reads SmartCraft, NMEA 2000 & J1939 data

Description: "Control Box, 6" x 6", Fits: Single actuator tabs


Autoglide Extension Cable, 30'
Your Price:
$130.49

Autoglide Extension Cable, 30'

462-622-30260004

Autoglide Extension Cable, 30'

  • Boat must be equipped with Lenco Electric Trim Tabs

  • All plug & play connections, All waterproof, solid state components

  • Reads SmartCraft, NMEA 2000 & J1939 data

Description: 30' Extension Cable


Bennett to Lenco Retrofit Kit, 12V
Your Price:
$442.39

Bennett to Lenco Retrofit Kit, 12V

462-622-15064001

Electric RetroFit Kit for Bennett Trim Tabs. Will retrofit any boat equipped with standard length Bennett 4-ring version hydraulic cylinders. Kit includes everything necessary to eliminate the hydraulic pump and and upgrade your boat to Lenco's electric system. Includes jumper wires to connect to current Bennett rocker switch. Complete installation instructions are included.

Volts: 12


Deutsch Plug Kit  5/Pk
Your Price:
$24.99

Deutsch Plug Kit 5/Pk

462-622-15107001

Used on Lenco actuators and extension harnesses.
Comes in a package of 5.

Description: Plug and Wedge Set, Pack: 5

Sold: Pack


Deutsch Receptacle Kit 5/Pk
Your Price:
$22.99

Deutsch Receptacle Kit 5/Pk

462-622-15107002

Used on Lenco actuators and extension harnesses.
Comes in a package of 5.

Description: Receptacle and Wedge Set, Pack: 5

Sold: Pack


Double Rocker Switch Panel for Dual-Actuator Trim Tabs
Your Price:
$177.99

Double Rocker Switch Panel for Dual-Actuator Trim Tabs

462-622-10221211D

"Economically priced double rocker switch with Deutsch connections.
36" power pigtail and mounting hardware included.
For 12-volt dual actuator trim tab systems.
Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
12-volt, with 36" power pigtail"

"
  • Economically priced. Double rocker switch with Deutsch connections.

  • 36" power pigtail and mounting hardware included.

  • For 12-volt single actuator trim tab systems.

  • Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"

  • 12-volt, with 36" power pigtail
"

Description: Double Rocker Switch Kit For Dual Actuator Systems


Double Rocker Switch Panel for Single Actuator Trim Tabs
Your Price:
$127.99

Double Rocker Switch Panel for Single Actuator Trim Tabs

462-622-10222211D

"Economically priced double rocker switch with Deutsch connections.
36" power pigtail and mounting hardware included.
For 12-volt single actuator trim tab systems.
Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
12-volt, with 36" power pigtail"

"
  • Economically priced. Double rocker switch with Deutsch connections.

  • 36" power pigtail and mounting hardware included.

  • For 12-volt single actuator trim tab systems.

  • Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"

  • 12-volt, with 36" power pigtail
"

Description: Double Rocker Switch Kit For Single Actuator Systems


High Performance Electric Trim Tab Kit 12V, 14" x 12" Single Actuator"
Your Price:
$2,019.79

High Performance Electric Trim Tab Kit 12V, 14" x 12" Single Actuator"

462-622-15048101

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

Size: 14"L x 12"W, Boat Size: 16'-32', Actuator: Single, Volts: 12

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately.
Kit Includes:
  • 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes

  • Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins

  • Mechanical strain relief cable seal

  • Customer supplies mounting hardware

  • Switch Kits sold separately


High Performance Electric Trim Tab Kit 12V, 18" x 12" Single Actuator"
Your Price:
$2,084.19

High Performance Electric Trim Tab Kit 12V, 18" x 12" Single Actuator"

462-622-15049101

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

Size: 18"L x 12"W, Boat Size: 20'-40', Actuator: Single, Volts: 12

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately.
Kit Includes:
  • 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes

  • Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins

  • Mechanical strain relief cable seal

  • Customer supplies mounting hardware

  • Switch Kits sold separately


High Performance Electric Trim Tab Kit 12V, 25" x 14" Dual Actuator"
Your Price:
$3,333.09

High Performance Electric Trim Tab Kit 12V, 25" x 14" Dual Actuator"

462-622-15051101

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

Size: 25"L x 14"W, Boat Size: 28'-46, Actuator: Dual, Volts: 12

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately.
Kit Includes:
  • 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes

  • Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins

  • Mechanical strain relief cable seal

  • Customer supplies mounting hardware

  • Switch Kits sold separately


LIMITED SPACE LS ELECTRIC TRIM TAB KIT (LENCO)
Your Price:
$728.29

LIMITED SPACE LS ELECTRIC TRIM TAB KIT (LENCO)

462-622-15126101

"Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Switch kit sold separately. Minimum transom height - 14.5"."

Size: 4" x 12", Finish: Electro-Polished, Volts: 12

Sold: Each


Limited Space LS Trim Tab Kit 12 Volt
Your Price:
$807.29

Limited Space LS Trim Tab Kit 12 Volt

462-622-15088101

"Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Minimum transom height: 13". Switch kit sold separately. Minimum transom height - 13"."

Size: 4" x 12", Finish: Electro-Polished, Volts: 12

Sold: Each


Limited Space Trim Tab Kit
Your Price:
$767.49

Limited Space Trim Tab Kit

462-622-15052101

"Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit includes:

  • (2) 12-gauge stainless steel blades w/Electro-Polish finish

  • (2) actuators with 6' (1.8 m) lead and Deutsch connectors

  • (2) 30133-103 20' actuator extension wiring harnesses

  • (2) 15085-001 upper mounting brackets with gland seal

  • Lower mounting brackets

  • Stainless steel mounting hardware
"

Kit includes:
  • (2) 12-gauge stainless steel blades w/Electro-Polish finish

  • (2) actuators with 6' (1.8 m) lead and Deutsch connectors

  • (2) 30133-103 20' actuator extension wiring harnesses

  • (2) 15085-001 upper mounting brackets with gland seal

  • Lower mounting brackets

  • Stainless steel mounting hardware

Size: 4" x 12", Finish: Standard finish, Volts: 12

Sold: Each


Replacement Edge Mt. Trim Tab Blade, 9" x 12"
Your Price:
$180.99

Replacement Edge Mt. Trim Tab Blade, 9" x 12"

462-622-20158001

"Replacement Edge Mt. trim tab blade, 9" x 12"

"
  • Single blade only

  • Standard finish

  • 12 gauge 304 stainless steel

  • 1" turned up edges / 85° taper
"

Description: Edge Mt. Blade Only, Size: 9" L x 12" W", Finish: Standard

Sold: Each


Trim Tab Kit-Airboat 9" x 14"
Your Price:
$459.89

Trim Tab Kit-Airboat 9" x 14"

462-622-15112101

"Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.
Airboat Trim Tab Kits contains:
1) 12-gauge 304 stainless steel trim tab plane
1) #15055-001 actuator with 6' lead & Deutsch plug
1)#30133-002 14' actuator extension wiring harness
1) #15085-001 (116) upper mounting bracket with gland seal
Owner's/installation manual & stainless steel mounting hardware
Switch sold separately (15095001)"

"Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.
  • Airboat Trim Tab Kits contains:

  • 1) 12-gauge 304 stainless steel trim tab plane

  • 1) #15055-001 actuator with 6' lead & Deutsch plug

  • 1)#30133-002 14' actuator extension wiring harness

  • 1) #15085-001 (116) upper mounting bracket with gland seal

  • Owner's/installation manual & stainless steel mounting hardware

  • Switch sold separately (15095001)
"

Size: 9"L x 14"W"

Sold: Each


Y-Harness for Dual Station Installations
Your Price:
$63.99

Y-Harness for Dual Station Installations

462-622-30209001D

Y-Harness for Dual Station Installations. See Lenco's AutoGlide website for application information.

Description: Replacement Y Connector Harness

Sold: Each