Ventilation - Blowers

12 Volt Blower Flangemount
Your Price:
$91.99

12 Volt Blower Flangemount

462-6-351150020

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 4 3/4" W x 5 1/2" H


4" Continuous Heavy Duty Blower, 12V"

Starting From:
$272.99
This Part has options, please click the button below to order.

4" Continuous Heavy Duty Blower, 12V

462-6-357 + Option(s)

Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or gen set enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM .

Flangemount, Hose: 4", Volts: 12, Size: 9-3/8" L x 8-3/4" W x 9" H 

Flexmount, Hose: 4", Volts: 12, Size: 9-1/4" L x 9-3/16" W x 9-5/8" H


Detmar Tunnel Blower

Your Price:
$22.99

Detmar Tunnel Blower

462-89-754

The tunnel design places the motor in the center of the air flow for cooler operation, which results in lower amperage draw. All models are BIA approved and rated and meet U.S.C.G. Safety Standards. Blower housing of ABS plastic. Special clips on all hose flanges eliminate the need for hose clamps.

Hose sizes: 3" or 4"
CFM: 240


Johnson Pump 12V Inline Blower

Your Price:
$36.00

Johnson Pump 12V Inline Blower

462-189-66

  • High efficiency blower
  • High capacity at low amp draw
  • Constructed of ABS plastic
  • Meets & exceeds: ABYC H-2
  • NMMA Type Accepted, U.S.C.G. 33 CFR sections 183.410, 183.425 & 183.610
  • 1 Year Warranty

Hose: 3", CFM: 158, Volts: 12, Amps: 3.5

Hose: 4", CFM: 240, Volts: 12, Amps: 3.5


Johnson Pump 80-47417-01 12V AirV 4-550 Flange Mount Extra Heavy Duty Radial Blower
Your Price:
$178.99

Johnson Pump 80-47417-01 12V AirV 4-550 Flange Mount Extra Heavy Duty Radial Blower

462-189-804741701

Extra heavy duty marine radial blower is designed for engine compartment ventilation prior to startup. Made for continuous duty and is therefore suitable for air intake or extraction in bilges, galleys, accommodation and other compartments. Flange Mount design with double ball bearing motor, high-impact anti-shock ABS body with stainless steel shaft and screws.

Mount: Flange, Hose: 4", CFM: 324, Volts: 12, Amps: 12.5, Size: 11.5"H x 10"W x 6"L


Par 115V Blower Flangemount
Your Price:
$195.99

Par 115V Blower Flangemount

462-6-347440000

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Note: Is not ignition protected and is not intended for bilge ventilation on vessels with gasoline engines.

Hose: 3", CFM: 100, Volts: 115 AC, Amps: 0.6, Size: 7" L x 6 5/8" W x 7 5/8" H


Par 12V 3 Blower Flexmount
Your Price:
$165.99

Par 12V 3 Blower Flexmount

462-6-367400000

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 150, Volts: 12, Amps: 6.8, Size: 8" L x 8 3/16" W x 9 1/8" H


Par 12V Blower Flangemount
Your Price:
$153.99

Par 12V Blower Flangemount

462-6-347390010

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 3", CFM: 150, Volts: 12, Amps: 10, Size: 8" L x 6 3/4" W x 7 3/4" H


Par 12V Blower Flangemount 4
Your Price:
$187.99

Par 12V Blower Flangemount 4

462-6-354000000

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 8 3/4" W x 9" H


Par 12V Blower Flexmount 3
Your Price:
$106.99

Par 12V Blower Flexmount 3

462-6-355150010

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 5" W x 5 1/2" H


Par 12V Blower Flex-Mount 4
Your Price:
$192.99

Par 12V Blower Flex-Mount 4

462-6-354400000

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 9 1/4" W x 9 5/8" H


Par 24V Blower Flangemount 4
Your Price:
$220.99

Par 24V Blower Flangemount 4

462-6-354000010

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 24, Amps: 7.5, Size: 8 3/4" L x 8 3/4" W x 9" H


Rule Inline Bilge Blower 12V
Starting From:
$33.99
This Part has options, please click the button below to order.

Rule Inline Bilge Blower 12V

462-29- + Option(s)

Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection.

Hose: 3", CFM: 135, Volts: 12, Amps: 2.9, Fuse: 4A

Hose: 4", CFM: 235, Volts: 12, Amps: 4.3, Fuse: 7A


Seachoice In-Line Bilge Blower
Your Price:
$28.99

Seachoice In-Line Bilge Blower

462-50-41841

Housing is molded of tough, corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose connections. Blower meets or exceeds the following standards: ABYCH H-2, NMMA Certified, USCG 33 CFR Sections 183.410 and 183.425, ISO 9097, UL Listed, UL 1128

  • Standard Marine blowers.
  • 4" Intake.
  • 4" exhaust with remote bracket.
  • 5-3/4" length.
  • 4-3/4" mounted height.
  • CFM 240 air movement.
  • Ignition protected & spark proof.
  • 12V DC, 4.5A.
  • Use 5A fuse.
  • Hose: 4"

Seachoice In-Line Bilge Blower
Your Price:
$28.99

Seachoice In-Line Bilge Blower

462-50-41851

Housing is molded of tough, corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose connections. Blower meets or exceeds the following standards: ABYCH H-2, NMMA Certified, USCG 33 CFR Sections 183.410 and 183.425, ISO 9097, UL Listed, UL 1128 Standard Marine blowers. 3" Intake. 3" exhaust with remote bracket. 8" length. 4-3/4" mounted height. CFM 170 air movement. Ignition protected & spark proof. 12V DC, 4.0A. Use 6A fuse.

Hose: 3"
CFM: 170


Turbo 3000, 3" Blower
Starting From:
$26.99
This Part has options, please click the button below to order.

Turbo 3000, 3" Blower

462-23-17334 + Option(s)

Patented in-line-design provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces.

Description: Standard, White, Hose: 3", CFM: 120, Volts: 12, Amps: 2.6

Description: Water-Resistant, White, Hose: 3", CFM: 120, Volts: 12, Amps: 2.6


Turbo 4000, 4" Blower
Starting From:
$29.99
This Part has options, please click the button below to order.

Turbo 4000, 4" Blower

462-23-174 + Option(s)

The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed.

Standard, White, Hose: 4", Volts: 12, Amps: 2.5
Water Resistant, White, Hose: 4", Volts: 12, Amps: 2.5