137-9145 Single Cylinder Power Assist Helm Unit
75cc
|
|
This Part has options, please click the button below to order.
620-2000 + Option(s) Single Engine "Silent Choice" Exhaust Cut-Out Kit - Captain's Call Replacement
Need the complete solution? The Exhaust Cut-Out Kit is your answer! Includes Tips, Diverters, Actuator, Hose and Clamps. Standard Kit includes two 8" long sections of 4" exhaust hose and straight cut tips. These kits are designed to be fitted in stock bravo exhaust locations. See this measurement sheet for more info. If you must place tips in a different location more hose and angle bends may be required. Call us if you need any assistance. Angle cut tips and longer hose available by special order.
These diverters will fit Bravo and Alpha applications 1987 and up they will not fit the 8.1 engines, OMC or Volvos.
The Mercury 350 dry joint exhaust will not work with the Hardin diverter.
Corsa has a set part number 270-61000 for standard non riser spacers. If there is space, we need to know if it is 3" or 6" and Corsa can build a custom set.
|
|
410-286125 These Hardin Marine full time thru-prop and thru-hull diverters are a popular exhaust option for a silencing diverter system. This fixed device allows for a muffled sound that is suited for pleasure cruising and the open water. When matched with the extremely popular #410-284401 slip in mufflers you can create a quiet and quick to install system that meets most noise laws within the 50 states on any Stock 502 EFI or smaller production motor.
Our system enables the exhaust to exit through the transom and the prop at the same time by combining a silencer tip with the housing of a diverter (no electronics). At lower RPM's most of the exhaust will be heard through the exhaust tips. As RPM's increase more exhaust is forced through the Y-pipe, allowing optimum flow and noise reduction.
Fits Mercruiser 502, 454, 350, and 305 engines. SOLD AS A PAIR. INCLUDES DIVERTERS ONLY! ASSEMBLED PHOTOS ARE SHOWN AS EXAMPLES ONLY. HOSE, CLAMPS AND TIPS SOLD SEPARATELY. SEE RELATED PARTS
|
|
This Part has options, please click the button below to order.
421-84 + Option(s) Single Groove Billet Crankshaft Pulley For Big Block Chevy
- Machined from 6061-T6 billet aluminum.
- Set up for a Mercury replacement with deeper v-groove.
- Comes highly polished.
- 6-7/16" Diameter
- 7/8" Height
- Available in Satin, Polished and Black
|
|
625-4370
- Standard version of our single inlet crossover.
- Feature a single 90 degree 1-1/4” hose barb.
- Inlet can be clocked or indexed to different positions.
- Accommodates various water inlet hose routing.
- These units fit all popular B/B GM type engines.
- Dual side entry 1" NPT inlets also included.
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
- Includes bolts and pipe plugs.
|
|
625-4372
- Low profile swivel 1-1/4"hose barb provision.
- Power steering pump mounting provision.
- CNC machined from 6061-T6 billet aluminum
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
- Single center inlet 1-1/4" hose fitting.
- Dual side entry 1" NPT inlets also included.
- Inlet can be indexed or clocked to different positions.
- Fit all popular B/B GM type engines.
- Includes bolts and pipe plugs.
|
|
620-286510 Single Panel Pneumatic Pump Kit
This unit
includes consists of the air pump, relay and valve mounted on a stainless steel
bracket. The kit also includes PVC air lines and all necessary fittings.
|
|
625-4190 Single Stage Sea Pump Factory Rebuild
This is a factory rebuild of your pump. You will need to send your pump in to rebuilt. We will contact you with details when ordered.
|
|
625-4069 Single Stage Shaft for Hardin Marine Multi Stage Sea Pumps
|
|
137-8603 Single Trim Switch Bracket For Isotta Carlotta Steering Wheel
This bracket will mount to an Isotta Carlotta steering wheel and allow the attachment of one Bluetooth Trim Switch.
|
|
137-8606 Single Trim Switch Bracket For Most 6-Bolt Momo Pattern Steering Wheels
This bracket will mount to most 6-Bolt Momo pattern Steering Wheels and allow the attachment of one Bluetooth Trim Switch. Bracket position is adjustable, and can be flipped one way or the other for best fit. Works best on steering wheels with equidistant spokes.
|
|
615-5706 Skeg
- Sold As Is
- (1) One Available
- V-Drive Fin with Speedo Pickup
|
|
|
|
|
This Part has options, please click the button below to order.
125-AS- + Option(s) Slimline Flat Style Billet Aluminum Powder Coated Gauge Bezels
- 2-1/16" ID, 2-1/2" OD
- 3-3/8" ID, 3-7/8" OD
These are angle bezels that have a narrower O.D. Shown below are approximate color representations. All computer screens are different and will display color differently. The Red, Blue, Purple, Teal and Polished powder coats are "candy" or translucent while the Black, White, Orange, Yellow and Lime Green powder coats are flat.
See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!
|
|
This Part has options, please click the button below to order.
125-FS- + Option(s) Slimline Flat Style Billet Aluminum Powder Coated Gauge Bezels
- 2-1/16" ID, 2-1/2" OD
- 3-3/8" ID, 3-7/8" OD
These are flat bezels that have a narrower O.D. Shown below are approximate color representations. All computer screens are different and will display color differently. The Red, Blue, Purple, Teal and Polished powder coats are "candy" or translucent while the Black, White, Orange, Yellow and Lime Green powder coats are flat.
See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!
|
|
This Part has options, please click the button below to order.
680-301 + Option(s) Slim-Line 4-1/2" and 6" Pull-Up Cleats
- Sleek narrow design allows installation where other flush-mount cleats won't fit.
- Easy to pull up - the recess in the base allows the cleat to be grasped quickly and easily.
- No separate waterproofing cup is necessary - each cleat can be completely sealed, or can be drained through a 1/2" diameter tube connected directly to the cleat base.
- Made of marine grade 316 stainless steel.
- 3/16" thick, stainless steel backing hardware is standard on all models and is included with each cleat.
|
|
300-16871 Small Block Chevy & 4.3L V6 Front Seal- Sold Each
These excellent front timing
cover seals are designed to replace worn, deteriorated
original equipment seals and provide years of trouble free service
Sold Each
|
|
This Part has options, please click the button below to order.
620-910513 Small Block Chevy 1986-Newer 8 Quart Stern Drive / Jet Drive Performance Oil Pan
This SBC High Capacity Marine Pan is for '86 and newer blocks with a one piece seal. With a deep 7-1/2" full length sump it holds 8 quarts of oil for greater oil capacity. Designed for applications with the pickup at the flywheel end of the engine.
Features:
- 8 qt Pan Capacity
- 14 ga. Steel Construction
- Double Trap Door Baffles
- Removable Windage/Anti-Slosh Baffle
- 1/2" NPT Drain Fittings
- Provision For our Pan Mounted Dipstick
- Powder Coating & Brass Plugs For Corrosion Protection
|
|
620-51998 Small Block Chevy 1996 and Up Polished Intake Manifold, Idle to 5500 RPM
If you need proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application.
|
|
300-16874 Small Block Chevy 1-piece Rear Main Seal- Sold Each
These excellent rear main seals are designed to replace worn, deteriorated
original equipment seals and provide years of trouble free service
Sold Each
|
|
421-214 SB Chevrolet 3 V-Groove Billet aluminum OEM style Crankshaft Pulley. This pulley fits Chevrolet V6 4.3L, 305 5.0L and 350 5.7L applications all years with a "V" belt. Replaces Mercruiser Part #90081A1 (OEM casting number 90081C) Pulley Specifications: - 2.25" thick from damper face to front of pulley
- 1st groove (alternator) 6.60" diameter
- 2nd groove (sea pump) 5.05" diameter
- 3rd groove (power steering) 6.60" diameter
|
|
620-52000 Small Block Chevy '57-'95 Polished Intake Manifold, Idle to 5500 RPM
If you need proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application.
|
|
620-51999 Small Block Chevy '57-'95 Satin Intake Manifold, Idle to 5500 RPM
If you need proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application. The 51999 Manifold is a direct replacement for the stock manifold on 1957-’95 Small Block Chevy engines. Includes special adapter bushings to fit ’87-’95 engines. Kit includes adapter plate to permit use of certain square bore style carburetors.
|
|
620-910603 Small Block Chevy 8 Quart Jet Pan Pick-up pre-1985
These are just a few of the popular marine engine oil pan pick-ups that we
offer. If you don't see the one your looking for we've probably got it.
|
|
620-51997 Small Block Chevy '96 and Up Satin Intake Manifold, Idle to 5500 RPM
If you need proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application. Intake Style: Dual plane, Basic Operating RPM Range: Idle-5,500, Intake Manifold Height: 4.250 in., Intake Material: Aluminum, Intake Finish: Natural, EGR: No
|
|
510-5203 Small Block Chevy Adapter Plate Header Gasket Kit
This gasket kit, made by Hardin Marine is used with Small Block Chevy Lightning Headers, or Over Transom Headers such as Bassett or Rewarder Headers. When replacing the gaskets on these applications you'll need this and a standard Small Block Chevy Exhaust Gasket, so we created a kit package that includes all four gaskets. These are high quality original equipment style gaskets die cut to exacting size and shape for the perfect fit every time.
|
|
510-5205 Small Block Chevy Adapter Plate Header Gaskets
These gaskets, made by Hardin Marine are used with Small Block Chevy Lightning, Bassett or Rewarder Headers adapter plates. When replacing the gaskets on a Small Block Chevy Basset or Rewarder Header, you'll need this and a standard Small Block Chevy Exhaust Gasket. These are high quality original equipment style gaskets die cut to exacting size and shape for the perfect fit every time. Sold as pairs.
|
|
