Hardin Marine

Powersteering Reservoir with Filter, Bulkhead Mount, Polished

• Hardin Marine's new Powersteering Filter / Reservoir Combo
• Mounting bracket can be mounted on top or bottom
• Made from black anodized Billet 6061 T-6 aluminum and a polished stainless steel mounting bracket.
• Holds 38 ounces of fluid and has (2) 3/8” NPT inlets and (1) 1/2” NPT outlet.
• Both top and bottom can be rotated for easy plumbing.
• Utilizes a 100 micron stainless steel screen filter.
• Billet 6061 T-6 polished aluminum leak proof cap.
• Available in black part number 137-9010

Precision Roller Bearing Dual Carburetor Linkage Kit - 671, 871, 1071,1471 Supercharger With Standard Holley

These linkage kits are used on dual carbureted applications such assupercharger and tunnel rams when the carburetors are mounted sideways.Their high quality roller bearing design assures precise throttle operation.

Precision Roller Bearing Dual Carburetor Linkage Kit - B&M/Holley 420 Mega Blower Side Mounted Standard Holley And Demon

These linkage kits are used on dual carbureted applications such as supercharger and tunnel rams when the carburetors are mounted sideways. Their high quality roller bearing design assures precise throttle operation.

This Linkage Kit Requires That The Blower Case Has a 5/16" Threaded Hole in the Side, about 1/2" Way Up. Some of the early B&M Blowers Do Not have this hole and this kit WILL NOT WORK.

Precision Roller Bearing Dual Carburetor Linkage Kit - B&M/Holley 250 Side Mounted Standard Holley And Demon

These linkage kits are used on dual carbureted applications such as supercharger and tunnel rams when the carburetors are mounted sideways. Their high quality roller bearing design assures precise throttle operation.

Precision Roller Bearing Dual Carburetor Linkage Kit - Complete Side Mount System For Big Block Chevy Tunnel Ram

These linkage kits are used on dual carbureted applications such as supercharger and tunnel rams when the carburetors are mounted sideways. Their high quality roller bearing design assures precise throttle operation.

Prestolite 120 Amp Marine Alternator with Tach Terminal

This USCG approved Prestolite marine alternator is 100% new, not rebuilt, and features the latest in non-corrosive elements. 10Si Style Alternator. 1" Mounting Foot, .5" Diameter, Bolt Hole W/ 3-Hole Adjustment Ear, Ignition Projected SAE J1171, 3-Wire Hook Up, Red Wire Is For Sensor, Black Wire Is For Excitation, Internally Regulated And Rectified. OE# 78403A2 Hi-Output replacement for older Mercruiser 1983-89 55Amp Motorola Alternators.

Pro-Series Manual/Pneumatic Oil Extractor, 15 Liter

Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc.
Not for use with flammable or corrosive products.
Can be operated manually or attached to a compressor and features a 40-170 psi working range.

PTO 1310 Adapter Bolt Kit

Note: To determine U joint flange size (1310 or 1350) refer to the followinginformation.
1310 - uses 3/8-24 bolts on 2" x 2-3/8" centers
1350 - uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers

Contains (6) 7/16" x 1-1/4" Bolts and (4) 3/8" x 1" bolts

NOTE: This bolt kit does NOT fit LS PTO's, for LS PTO bolts CLICK HERE.

PTO 1310 Adapter Bolt Kit For SB Chevy

Note: To determine U joint flange size (1310 or 1350) refer to the followinginformation.
1310 - uses 3/8-24 bolts on 2" x 2-3/8" centers
1350 - uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers

For use on newer model SB Chevy PTO's with 1 pc rear seal

Contains (4) 7/16" x 1-1/4" Bolts and (4) 3/8"x1" bolts

PTO 1350 Adapters Bolt Kit

Note: To determine U joint flange size (1310 or 1350) refer to the following information.
1310 - uses 3/8-24 bolts on 2" x 2-3/8" centers
1350 - uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers

Contains (6) 7/16 x 1-1/4" Bolts and (4) 7/16" x 1" bolts

Pulley Mandrel Mercury Sea Pumps.

Pulley Mandrel with Keyway For Multi-Stage Sea Pumps.

2", 3" and 5" Pump Extension for Cam Driven Pumps

These allow for that extra clearance you may need for your cam driven water pump to clear maybe a supercharger belt. To install, remove current female slot cam drive adapter from your pump and install extended adapter. Use loc-tite on the set screw. Install extension housing onto pump and then reinstall pump onto the engine.

Push / Pull Switch - 2-Position On (On-On)

These are high quality brass switches available in four different models. The switches require a 3/8" hole for mounting.

Push / Pull Switch - 2-Position (On-Off) One-Circuit Switch

These are high quality brass switches available in four different models. The switches require a 3/8" hole for mounting.

Push / Pull Switch - 3-Position (Off-On-On) Used For Navigation Lights

These are high quality brass switches available in four different models. The switches require a 3/8" hole for mounting.

2-position Off/Push to On

These switches are perfect as starter buttons or can be used in just about any momentary type operation. Each switch features brass construction with a chrome plated nut and button for good looks. There is also a moisture repellent rubber cap sold separately.

Replacement Trim Button Switch. Used on:

• Older Model Hardin Offshore Controls (Pre-2019)
• Hardin Sport Shifter Controls
• Hardin Stiletto Controls

Hardin’s breathers featuremaximum flow and protection from airborne elements. They are used on most HardinMarine valve cover systems. These breathers are easily washable for service.

• 1" grommet
• 1.75" tall
• 2.5" outer diameter

Push-In Breather With Vent

These popular breathers are used when you would like to vent the crankcase to another location such as the flame arrestor or a vac-u-pan. This unit is used on many MerCruiser hi-performance applications. The push in has a 1" hole and a 5/8" vent hook-up.

Push-In Chrome Oil Fill Plug

Push-in design for all applications requiring a sealing type filler plug. Chrome plated top section. Fits most aftermarket and OEM valve covers with a 1.22" diameter hole.

Push-In Filtered Valve Cover Breather - No Shield (Each)

These breathers feature maximum flow and protection from airborne elements. They are used on most Hardin Marine valve cover systems. The breather is washable providing for easy maintenance. Fits 1.25" hole.

Push-In Filtered Valve Cover Breather With Chrome Shield (Each)

These breathers feature maximum flow and protection from airborne elements.  They are used on most Hardin Marine valve cover systems.  The breather is washable providing for easy maintenance. Fits 1-1/4" hole.

• Constructed of Polished 316L Stainless Steel.
• 3/4" NPT Female Thread
  
• Perfect for intercooler, tailpipe, and even engine water discharge. 

Quick Engine Flushing Adapter Replacement

Replacement flushing adapter for 620-913300.