Hardin Marine

Internal Balance Alum. Flywheel LSA/LSX Chevy (Bottom Mounted Starter)

These all new billet aluminum flywheels are manufactured from certified billet material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.

Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past. By using a lighter aluminum flywheel, you will be rewarded with both faster acceleration and deceleration. Giving you the edge you’re looking for.

Billet construction

• Accepts Mercury couplers and heavy duty drive plates
• Multi-point ring gear attachment
• Light weight yet durable
• Zero/neutral balance • 168 tooth gear
• 12 lbs

Internal Balance Alum. Flywheel LSA/LSX Chevy (Top Mounted Starter)

These all new billet aluminum flywheels are manufactured from certified billet material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.

Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past. By using a lighter aluminum flywheel, you will be rewarded with both faster acceleration and deceleration. Giving you the edge you’re looking for.

Billet construction

• Accepts Mercury couplers and heavy duty drive plates
• Multi-point ring gear attachment
• Light weight yet durable
• Zero/neutral balance • 168 tooth gear
• 12 lbs.

In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat.

While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade  6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear.

So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts.  Staggered or side by side mounts are perfect for vee bottom installations.

Note: These motor mounts are used in side by side engines and engines that are staggered. THESE MOUNTS ARE RAW FINISH.

NOTE: THESE ARE RAW FINISH

In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat

While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade  6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear.

So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts. 

Fits: All Big Block Chevrolet. Note: COMES IN RAW FINISH

NOTE: THESE ARE RAW FINISH

Its always the tools that make every job a little easier and that’s just what these items will do for you. The lifting eyes provide a perfect , worry free, secure mounting point, to pick-up any engine. Includes 3/8" x 1-1/2" Bolts & Spacers. Fits Big Block Chevy, Head Mount.

These hose and cable bezels are manufactured from billet aluminum and available in powdercoated finish or polished. These are an ideal solution for routing braided line, hoses or cables through your transom or bulkhead.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Ignition Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Hardin Marine Billet Aluminum Optima Battery Box

If you're the kind of performance boater that appreciates the finest things the marine industry has to offer then you will be dazzled by these new Optima Battery Mounts. Not only are they outrageously beautiful they have some great design features. The rectangular side post supports are dual pin indexed providing extreme stability in all environments. These supports are completely machined from from one solid piece of billet aluminum, there are no welds to break. Available polished or in a variety of powder coated colors to match your application.

The optional step-top makes a great addition while creating a sturdy support that aids in stepping into your engine compartment. This step uses a solid mounting block rather than the little 3/8" spacers used by other manufacturers. This solid mounting block was designed as a safety feature to ensure that the step will not wobble or rock, preventing potential personal injuries. Inside Dimensions measure 9-3/4" Long x 6-1/2" Wide x 7" Tall and Outside Dimensions measure 12" Long x 8" Wide x 7" Tall

Hardin Marine Billet Aluminum Optima Battery Box Step-Top Option (Step Only)

The optional step-top makes a great addition while creating a sturdy support that aids in stepping into your engine compartment. This step uses a solid mounting block rather than the little 3/8" spacers used by other manufacturers. This solid mounting block was designed as a safety feature to ensure that the step will not wobble or rock, preventing potential personal injuries. Used with part number 620-124901*

Billet Aluminum Positive Locking 3-Position Shift Controls

• The mounting holes are: 10/32 threads
• The handle of this control measures 7-1/4" from pivot center.
• It has 3 equidistant locking positions.
• It does not come with any mounting hardware.

This control gives positive locking engagement and is fabricated from the same 6061-T6 aluminum as the standard unit. This unit uses a smooth operating button release for effortless engagement and offers the security of locked control. We also offer a Turbo shift control for those of you running this transmission: The turbo 400 shifter.

Billet Aluminum Positive Locking 6-Position Shift Control for TH400 transmissions

This control gives positive locking engagement and is fabricated from the same 6061-T6 aluminum as the standard unit. This unit uses a smooth operating button release for effortless engagement and offers the security of a locked control. Mounts with #10-32 bolts on the back side.

Billet Aluminum Powdercoated Angled 4" Gauge Bezels - Limited Colors and Quantities

These are a 4" gauge bezels, an uncommon size, with limited quantities and colors available. These are old stock and not in 100% perfect condition.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Powdercoated Flat 4" Gauge Bezels - Limited Colors and Quantities

These are a 4" gauge bezels, an uncommon size, with limited quantities and colors available. These are old stock and not in 100% perfect condition.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Push / Pull Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Push Button Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

NOTE: THESE ARE RAW FINISH

NOTE: THESE ARE RAW FINISH

Billet Aluminum Standard Euro Style Vent 12-1/2" x 3-1/2" - Each

We've got them - the latest in billet handles and vents. These Euro Styled Vents feature smooth contoured shapes and edges. These units use the same mounting holes as the traditional handles and vents so they are perfect for a new boat building project or they will retro-fit the traditional handles and vents manufactured by Hardin Marine.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Standard Euro Style Vent 7-1/2" x 3-1/2" - Each

We've got them - the latest in billet handles and vents. These Euro Styled Vents feature smooth contoured shapes and edges. These units use the same mounting holes as the traditional handles and vents so they are perfect for a new boat building project or they will retro-fit the traditional handles and vents manufactured by Hardin Marine.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Steering Wheel Mounted Trim Switch, Billet Aluminum, Polished with Curly Cord

Billet aluminum trim switches designed to fit most steering wheels with simple two bolt drill mounting. Dual Switches.  Trim switch comes in polished finish. DOES NOT include a mounting plate.

1/4", 5/16", 3/8", 7/16" and 1/2" Stringer Washers

• O.D. 1-3/8"
• I.D. 1/4", 5/16", 3/8", 7/16", 1/2"
  • I.D. based on size you choose
• Thickness 1/4"

These beautifully finished CNC machined stringer washers are the finishing touch to any installation. Available in Machined, Blue, Red, and Black. 1-3/8" O.D, 1/4" Thick.

Billet Aluminum Switch Knobs - Plain, Pump, Blower, Light, Mag, Fuel, NOS, Accessory

These billet aluminum switch knobs are perfect for accenting and tying in the colors of your boat. They are available in all of the popular colors and simply thread on to all 10-24 standard switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!