Add-On Kits - IMCO Marine

Alpha Dual Drive Dual Ram Power Steering - Narrow
Your Price:
$3,469.99

This Part has options, please click the button below to order.

Alpha Dual Drive Dual Ram Power Steering - Narrow

421-SA-28R

Dual Ram Power Steering for Dual Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Dual Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately six hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Alpha Dual Ram Power Steering - Narrow
Your Price:
$3,279.99

This Part has options, please click the button below to order.

Alpha Dual Ram Power Steering - Narrow

421-SA-25R

Dual Ram Power Steering for Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Alpha Dual Ram Power Steering - Standard
Your Price:
$3,089.99

This Part has options, please click the button below to order.

Alpha Dual Ram Power Steering - Standard

421-SA-25

Dual Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Dual Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Alpha Single Ram Power Steering - Narrow
Your Price:
$1,849.99

This Part has options, please click the button below to order.

Alpha Single Ram Power Steering - Narrow

421-SA-26R

Single Ram Power Steering for Alpha Applications 9" Narrow Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Alpha Single Ram Power Steering - Standard
Your Price:
$1,749.99

This Part has options, please click the button below to order.

Alpha Single Ram Power Steering - Standard

421-SA-26

Standard Single Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Hose Kit Brazil Control Valve, Short Hoses
Your Price:
$215.60

This Part has options, please click the button below to order.

Hose Kit Brazil Control Valve, Short Hoses

421-HK-11

Hose Kit Brazil Control Valve, Short Hoses

BRAZIL CONTROL VALVE APPLIES TO ALL EFI ENGINE PACKAGES 1994 AND LATER "FOR BOATS EXCEEDING 70 MPH A FULL HYDRAULIC HOSE KIT IS RECOMMENDED"


For Replacement Parts Click Here


Hose Kit Saginaw Control Valve, Short Hoses
Your Price:
$179.99

This Part has options, please click the button below to order.

Hose Kit Saginaw Control Valve, Short Hoses

421-HK-9

Hose Kit Saginaw Control Valve, Short Hoses

"FOR BOATS EXCEEDING 70 MPH A FULL HYDRAULIC HOSE KIT IS RECOMMENDED" SAGINAW CONTROL VALVE APPLIES TO ALL HIGH PERFORMANCE ENGINE PACKAGES 1999 AND EARLIER AND TO ALL ENGINE PACKAGES 1994 AND EARLIER


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,369.99

This Part has options, please click the button below to order.

Steer Kit 1 Bravo, 1 Ram, 11.25” Transom Bracket Location

421-SA-1

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,471.91

This Part has options, please click the button below to order.

Steer Kit 1 Bravo, 1 Ram, 4.87” Transom Bracket Location

421-SA-30-R

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,381.91

This Part has options, please click the button below to order.

Steer Kit 1 Bravo, 1 Ram, 6.37” Transom Bracket Location

421-SA-30

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,464.71

This Part has options, please click the button below to order.

Steer Kit 1 Bravo, 1 Ram, 9.75” Transom Bracket Location

421-SA-1-R

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 1 Bravo, 2 Rams, 4.87” Transom Bracket Location
Your Price:
$2,758.95

Steer Kit 1 Bravo, 2 Rams, 4.87” Transom Bracket Location

421-SA-20-R

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 1 Bravo, 2 Rams, 6.37” Transom Bracket Location
Your Price:
$2,578.95

Steer Kit 1 Bravo, 2 Rams, 6.37” Transom Bracket Location

421-SA-20

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 1 Bravo, 2 Rams, 9.25” Transom Bracket Location
Your Price:
$2,765.25

Steer Kit 1 Bravo, 2 Rams, 9.25” Transom Bracket Location

421-SA-2-R

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 1 Bravo, 2 Rams, E-Box, Straight Back, Black
Your Price:
$5,165.91

Steer Kit 1 Bravo, 2 Rams, E-Box, Straight Back, Black

421-SA-12-E

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives. Includes an extension box kit.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,720.58

This Part has options, please click the button below to order.

Steer Kit 1 Evinrude E-Tec 250 HO Motor, 1 Ram

421-SA-82

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering
Your Price:
$1,917.86

This Part has options, please click the button below to order.

Steer Kit 1 Mercury 200, 225, 250, 300 XS Motor, 1 Ram

421-SA-74

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Mercury XS powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Steer Kit 2 Bravos, 2 Rams Bet, Stk Tie Bar, V-Bot, 9.75” Transom Bracket Location
Your Price:
$2,722.68

Steer Kit 2 Bravos, 2 Rams Bet, Stk Tie Bar, V-Bot, 9.75” Transom Bracket Location

421-SA-39-R

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 2 Bravos, 2 Rams Bet, V-Bot, 9.75” Transom Bracket Location
Your Price:
$2,728.98

Steer Kit 2 Bravos, 2 Rams Bet, V-Bot, 9.75” Transom Bracket Location

421-SA-4-R

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here


Steer Kit 2 Bravos, 2 Rams Out, Cat, 11.25” Transom Bracket Location
Your Price:
$4,449.51

Steer Kit 2 Bravos, 2 Rams Out, Cat, 11.25” Transom Bracket Location

421-SA-3

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.


For Replacement Parts Click Here