Accessories - Trailer Accessories

4-FLAT WUNSIDE CONNECT 18"

The Wesbar 4-Flat Wunside Trailer End Connector is equipped with an 18" wunside harness and an 18" ground.

5-FLAT CAR ONLY CONNECT 6'

The Wesbar 5-Flat Car End Connector is 6' long with a 6' ground and auxiliary cable.

Adapter 7Way-5Way Flat "Stubby"

Wesbar Plug to Plug Adapters are available in a variety of combinations to fit and adapt most trailer connections. The "stubby" models are not equipped with an extension cable.

4 Foot Transom Tie downs (pair)

Powerweb Tie downs feature over center style locking buckles to provide the most secure attachment for your boat to trailer needs. These tied owns are 4' long and have rubber hooks so there's no need to worry about scratching anything. 750 lb. rated capacity. Working load 250 lbs. 1" wide band.

McGard- Chrome Cone Seat Style Trailer Lug Nut Set

• Overall Lug Nut Length: 1.50"
• Thread Size: 1/2" - 20
• Hex Size: 13/16"
• Cone Seat Style Lug Nuts
• Set of 10 Lug Nuts

McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!

Boat Guide Kit 44"

Fulton Boat Guide Kits feature non-marring, marine grade PVC uprights that install on trailer frames up to 3" x 5" and do not require any drilling to mount. Each kit includes a pair of guides and U-bolt mounting hardware.

• Size: 44" Upright height

Boat Guide Kit 50" Height

Fulton Boat Guide Kits feature non-marring, marine grade PVC uprights that install on trailer frames up to 3" x 5" and do not require any drilling to mount. Each kit includes a pair of guides and U-bolt mounting hardware.  Adjustable width up to 16" per side.

• Size: 50" Upright height

Trailer Jack

This trailer jack is fast and easy to use It features zinc plating for corrosion resistance and a 6" wheel for control This jack is rated with a 600 lb capacity tongue weight.

Ball Mount 9-1/2" L x 6" Drop Black

Fulton Quick Loading Ball Mounts feature one-piece forged construction and an angled design. They are designed for Class IV hitches.

• Finish: Black Powder
• Length: 9-1/2"
• Drop: 6"
• TW/GTW: 600#
• TW/GTW: 6000#

Hitch Ball 2" x1" x 2-1/8" Chrome

Fulton Trailer Balls are constructed of cold forged solid steel that meet all safety requirements of VESC regulation V-5.

Hitch Ball 2" x 3/4" x 1-1/2" Chrome

Fulton Trailer Balls are constructed of cold forged solid steel that meet all safety requirements of VESC regulation V-5.

• Ball Dia: 2"
• Shank Dia: 3/4"
• Shank Length: 1-1/2"
• TW/GTW: 3500#

Hitch Ball 2-5/16" x 1" x 2-1/8" Chrome

Fulton Trailer Balls are constructed of cold forged solid steel that meet all safety requirements of VESC regulation V-5.

• Ball Dia: 2-5/16"
• Shank Dia: 1"
• Shank Length: 2-1/8"
• TW/GTW: 7500#

Adapter, Round 7w-5f Female 18"

Wesbar Plug to Plug Adapters are available in a variety of combinations to fit and adapt most trailer connections. The "stubby" models are not equipped with an extension cable. They feature simple plug-in installation.

Ball Mount 8-1/2"L x 2" Drop

Fulton Quick Loading Ball Mounts feature one-piece forged construction and an angled design. They are designed for Class IV hitches.

• Finish: Black Powder
• Length: 8-1/2"
• Drop: 2"
• TW/GTW: 750#
• TW/GTW: 7500#

Dual-Track Replacement Wheel Kit

Fulton F2 Jack Replacement Wheels Kits come with two wheels and all necessary hardware to repair Dual track F2 jacks.

F2 Trailer Jack Wide-Track 1600#

Fulton F2 Trailer Jacks feature extruded aluminum alloy inner and outer tubes and an anodized, corrosion resistant finish. They are equipped with an integrated pull-pin which allows the jack to swivel easily up and down. The wide wheels support up to 1600 pounds of weight and the Dual-track model has 2 wheels that roll independently which makes changing direction smooth. Each model is equipped with an adjustable mount and swivel system and bolts onto marine, recreational and utility trailers.

• Wheel size: 7"Diameter x 5-1/2"W
• Weight capacity: 1600#

F2 Trailer Jack Wide-Track 1600#

Fulton F2 Trailer Jacks feature extruded aluminum alloy inner and outer tubes and an anodized, corrosion resistant finish. They are equipped with an integrated pull-pin which allows the jack to swivel easily up and down. The wide wheels support up to 1600 pounds of weight and the Dual-track model has 2 wheels that roll independently which makes changing direction smooth. Each model is equipped with an adjustable mount and swivel system and bolts onto marine, recreational and utility trailers.

• Wheel size: 7"Diameter x 5-1/2"W
• Weight capacity: 1600#

Fixed Mount Heavy Duty Square Jack 5000#

Fulton Heavy Duty Fixed Mount Square Jacks are designed for use with marine and utility trailers and feature heavy-duty zinc construction with a drop leg. They feature rust resistant Z-Max 600 finish and mount to 3" x 5" trailer frames up to 6" high. They come with a black plastic handle.

Heavy-Duty Spare Tire Carrier

The Fulton Heavy Duty Spare Tire Carrier fits wheels up to 16-1/2" in diameter with 4, 5 or 6 lug rims and trailer tongues up to 3"x5". It comes with a u-bolt frame and lug nuts to secure the tire to the frame and provides 4-3/4" lift and 7" offset to mount a tire up and out of the way. This carrier is constructed of heavy duty steel with a zinc plated finish for corrosion resistance. All mounting hardware is included.

Hi-Mount Spare Tire Carrier

The Fulton Hi-Mount Spare Tire Carrier allows a tire to be mounted 4-1/2" up and away from a trailer. It will fit tongues up to 3"x4" and has an adjustable bolt pattern to fit 4 and 5 lug wheels. It has a welded and reinforced steel plate construction and Galva-Tec plated finish.