Berkeley Jet Drive - Performance Upgrades

2 Degree Aluminum Nozzle Wedge
Your Price:
$59.99

2 Degree Aluminum Nozzle Wedge

152-102

2 Degree Aluminum Nozzle Wedge

Clear Anodized for protection!

4 Degree Aluminum Nozzle Wedge
Your Price:
$59.99

4 Degree Aluminum Nozzle Wedge

152-104

4 Degree Aluminum Nozzle Wedge

Clear Anodized for protection!

Prime-A-Jet
Your Price:
$64.99

Prime-A-Jet

152-SC9000

Prime-A-Jet

Eliminate having to rev the engine after putting the boat in water due to pump being air locked. This is a must for drag racers, as it's a common problem with running a droop snoot. This installs by drilling and tapping the top side of the bowl about 2.5" back from suction housing flange.


2 Degree Plastic Nozzle Wedge
Your Price:
$59.99

2 Degree Plastic Nozzle Wedge

152-112

2 Degree Plastic Nozzle Wedge

These wedges may be the answer you are looking for! These wedges allow for incremental changes to the handling character of your boat. The wedge can be turned downward to fix a porpoising problem or upward to free boat up that rides wet.

3 Degree Plastic Nozzle Wedge
Your Price:
$59.99

3 Degree Plastic Nozzle Wedge

152-113

3 Degree Plastic Nozzle Wedge

These wedges may be the answer you are looking for! These wedges allow for incremental changes to the handling character of your boat. The wedge can be turned downward to fix a porpoising problem or upward to free boat up that rides wet.

4 Degree Plastic Nozzle Wedge
Your Price:
$59.99

4 Degree Plastic Nozzle Wedge

152-114

4 Degree Plastic Nozzle Wedge

These wedges may be the answer you are looking for! These wedges allow for incremental changes to the handling character of your boat. The wedge can be turned downward to fix a porpoising problem or upward to free boat up that rides wet.

Aluminum Impeller, Inducer & Shaft Kit

Your Price:
$899.99

Aluminum Impeller, Inducer & Shaft Kit

150-1065

Aluminum Impeller, Inducer & Shaft Kit

This do-it-yourself kit comes with a new Berkeley 17-4 stainless steel machined shaft with the aluminum impeller, inducer, shaft sleeve, thrust bearing and snap ring pre-mounted.

Choose Impeller Size Below


Berkeley Aquamet Shaft
Your Price:
$599.99

Aquamet Berkeley Inducer Pump Shaft

150-M04416M

Aquamet Berkeley Inducer Pump Shaft

This is a Berkeley Aquamet shaft that has been machined for an inducer. The inducer used with it is 151-1025 or 950-132100‚Äč


Inducer Pre-Impeller Cavitation Reducer
Your Price:
$299.99

Inducer Pre-Impeller Cavitation Reducer

151-1025

Inducer Pre-Impeller (Shaft Sold Separately)
Fits all Popular Jet Drive Brands

The inducer pre-impeller is a stainless steel non-shrouded small axial flow impeller that mounts in front of a standard jet drive impeller. These pre-impellers load the standard jet drive mixed flow impeller for greater low end and mid range power without sacrificing top speed.

The inducer pre-impeller is available individually with easy to follow instructions or in kit form which includes a pre-cut impeller pump shaft along with the inducer. The inducer is a great add on for any power range or engine size application and fits all Berkeley, American Turbine, and Dominator jet drives.


Inducer Shaft & Bearing Kit
Your Price:
$599.99

Inducer Shaft & Bearing Kit

150-1055

Inducer Shaft & Bearing Kit

This kit fits: the standard Berkeley, Dominator, and American turbine pumps.

This do-it-yourself kit comes with a new Berkeley 17-4 stainless steel machined shaft with the inducer, shaft sleeve, thrust bearing and snap ring pre-mounted.


Key, Cavitation Reducer - Stainless Steel
Your Price:
$8.99

Key, Cavitation Reducer - Stainless Steel

151-1026

Key, Cavitation Reducer - Stainless Steel

Replacement Key for 151-1025


Spacer, Cavitation Reducer - Stainless
Your Price:
$49.99

Spacer, Cavitation Reducer - Stainless

151-1027

Spacer, Cavitation Reducer - Stainless

Replacement Key for 151-1025


Stainless Impeller, Inducer & Shaft Kit
Your Price:
$1,599.99

Stainless Impeller, Inducer & Shaft Kit

150-1060

Stainless Impeller, Inducer & Shaft Kit

This do-it-yourself kit comes with a new Berkeley 17-4 stainless steel machined shaft with the stainless steel impeller, inducer, shaft sleeve, thrust bearing and snap ring pre-mounted.


Billet Bowl Stuffer
Your Price:
$179.99

Billet Bowl Stuffer

150-SF2000

Billet Bowl Stuffer

This billet aluminum stuffer mounts into the bowl directly behind the impeller. By closing up this clearance the hydro flow dynamics of the water exiting the impeller is substantially increased. The result is improved hole shot and acceleration.

Note: This bowl stuffer is for use with a non-shoulder wear ring.

Some machining may be required for installation.


Droop Snoot
Your Price:
$399.99

Droop Snoot

150-H-02699

Berkeley Jet Droop Snoot

It has been machined to accept a place diverter nozzle or the Berkeley nozzle It comes double drilled Advantages of using the Berkeley Droop Snoot: lowers the thrust point of the jet, allowing the jet pump to have better leverage to lift the bow up, which in most cases will increase your top end speed.

Fastener Kit for "SS" & "XS" Loader Scoops
Your Price:
$13.99

Fastener Kit for "SS" & "XS" Loader Scoops

620-103120

Fastener Kit for "SS" & "XS" Loader Scoops


Fine Tune Nozzle Place Diverter Kit - Hydraulic Kit - Berkeley, American Turbine, Dominator
Your Price:
$969.99

Hydraulic Fine Tune Nozzle Place Diverter Kit

151-25126

FineTune Nozzle Place Diverter Kit - Hydraulic Kit - Berkeley, American Turbine, Dominator

These kits share all the great Place diverter features with the addition of one The nozzle housings have been machined to accept Place diverter nozzle inserts These inserts allow you to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.

Fits Berkeley jet drives: 12JC, JG, JB


Fine Tune Nozzle Place Diverter Kit - Hydraulic Kit - Berkeley E-Pump
Your Price:
$1,039.99

Hydraulic Fine Tune Nozzle Place Diverter Kit - Berkeley E-Pump

151-25127

FineTune Nozzle Place Diverter Kit - Hydraulic Kit - Berkeley E-Pump

These kits share all the great Place diverter features withthe addition of one The nozzle housings have been machinedto accept Place diverter nozzle inserts These inserts allowyou to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.


Hydraulic Place Diverter System for Berkeley & American Turbine
Your Price:
$899.99

Hydraulic Place Diverter Kit Berkeley 12JC, JG, JB

151-25115

Hydraulic Place Diverter System for Berkeley 12JC, JG, JB & American Turbine

This kit provides the freedom of instant control with the flip of a switch. This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with a hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.


Hydraulic Place Diverter Kit for Berkeley E Pump
Your Price:
$989.99

Hydraulic Place Diverter Kit for Berkeley E Pump

151-25120

Hydraulic Place Diverter Kit for Berkeley E Pump

This kit provides the freedom of instant control with the flip of a switchThis unit travels its full range in approximately 2 seconds, and due to itshydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness, switch, and allnecessary hydraulic fittings and lines.