516-3000-1012 Dual USB Port Charger Socket
- 12V DC Dual USB Charger dash mount with protective cap
- Compatible with popular mobile devices
- Easy to use
- LED lit by blue LED's
- Max output charge 2.1A total
- Output Voltage 5V DC+/- 5%
- Hole Size: 1"
- Thread Length: 1-5/8"
|
|
516-2000 Add a 12 volt receptacle to your boat so you can use 12v accessories such as battery / phone chargers
|
|
516-2100 Add a 12 volt receptacle to your boat so you can use 12v accessories such as battery / phone chargers
|
|
780-8501-DP Remote Dual Battery Switch
These switches permits selection between either one of
two batteries or operation of both batteries in parallel.
Battery switches allow you to protect your battery from
unsuspecting electrical draws.
|
|
780-8502-DP Remote Dual Battery Switch with Key Lock
These switches permits selection between either one of
two batteries or operation of both batteries in parallel.
Battery switches allow you to protect your battery from
unsuspecting electrical draws.
|
|
740-74103 Battery Terminal Disconnect Switch
One turn of the knob disconnects the battery and saves the solid state
regulator and alternator when charging. Switch is rated at 100 amps for 12 or 24
DC use.
|
|
464-415210-1 BATTERY TERMINAL WING NUT STYLE
Seadog 415210-1 Wing Nut Style Battery Terminal
Features:
- Includes Positive/Negative set
- Die cast lead construction
- Sold in pairs
|
|
464-9003E Battery Switch On/Off
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
|
|
464-9001E Battery Switch "e" Dual Circuit
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
- Switch Positions: 2
- Battery Inputs: 2
- Make-before-break contact design
|
|
464-9002E Battery Switch 4-Pos AFD
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
- Switch Pos.: 2
- Battery Inputs: 2
- Make-before-break contact design
- Alternator Field Disconnect
|
|
464-6007 Battery Switch Mini Selector
The Blue Sea Systems M-Series Mini Battery Switches are 300 AMP continuous rating for outboards and small diesel or gasoline engines. They have tin-plated copper studs for corrosion resistance and maximum conductivity as well as one-piece terminal stud design that will never loosen over time. 7/8" stud length accepts multiple cable terminals and isolating cover with three snap-in side pieces protects rear contacts and allows wire access in any direction. Case design allows surface, rear, or front panel mounting options and studs accept 3/8" (M10) ring terminals. They are labeled with international legends - 6 ICON label set included for circuit identification (6005 includes illustrated ON-OFF label only). Some models feature a removable knob that remains positively retained with a tactile indicated that conveys position when removed.
|
|
464-6006 Battery Switch Mini Single Circuit
The Blue Sea Systems M-Series Mini Battery Switches are 300 AMP continuous rating for outboards and small diesel or gasoline engines. They have tin-plated copper studs for corrosion resistance and maximum conductivity as well as one-piece terminal stud design that will never loosen over time. 7/8" stud length accepts multiple cable terminals and isolating cover with three snap-in side pieces protects rear contacts and allows wire access in any direction. Case design allows surface, rear, or front panel mounting options and studs accept 3/8" (M10) ring terminals. They are labeled with international legends - 6 ICON label set included for circuit identification (6005 includes illustrated ON-OFF label only). Some models feature a removable knob that remains positively retained with a tactile indicated that conveys position when removed.
|
|
464-7650 Add-A-Battery, Dual Circuit Sys
The Blue Sea Systems Add-A-Battery Dual Circuit System automates charging and simplifies switching for a complete two battery bank solution.
Kit Includes:
- Dual Circuit Plus(TM) Battery Switch
- Simplifies battery switching
- Isolates engine and house circuits
- Combines battery banks for emergency starting
- 120 AMP SI Automatic Charging Relay
- Automatically combines battery banks during charging
- Isolates battery banks when discharging and when starting engines
|
|