Livorsi Gauges - Water Flow

2-5/8" Water Flow Gauge Kits

Starting From:
$493.99

This Part has options, please click the button below to order.

2-5/8" Water Flow Gauge Kits

730-WFG + Option(s)

2-5/8" Water Flow Gauge Kits

The Raw Water Flow system is a new patented system that indicates your engine’s water flow volume. This system warns you of a potential problem or danger that would otherwise not be indicated by a water pressure gauge alone, thus preventing cosmetic and structural damage to expensive exhaust headers, intercoolers and other cooling systems. Water flow is a real indication of water surging through a cooling system such as: exhaust headers, sea strainers, impellers, Gen sets, intercoolers and any other marine or industrial applications that utilize water flow. Don’t confuse water flow with water pressure; as many OEM engine manufacturers measure water pressure in different areas of the motor. This number may not be telling you the real story of water flow. Your water pressure can be constant from the first day you bought your new boat. The danger may be lurking in the water flow which could be caused by:
  •     A plugged heat exchanger
  •     Extensive debris build-up in the intercooler or sea strainer
  •     A kinked hose
  •     Worn impeller
  •     Water pickups not collecting enough water for cooling system
These may be the culprits causing the good water pressure reading, when in actuality there is poor water flow. Low water flow results in; cosmetic and structural damage to expensive exhaust headers caused by burned impellers and/or the clogging and damage of intercoolers or strainers. Calibration is set at idle and at wide open throttle (WOT). This will generate the cooling system’s normal operating range. When water flow rises or drops more than 20% from that range (regardless of RPM), it will trip the alarm illuminating the built-in LED light; an optional audible alarm may be added. Pick the size of the hose and mount the Tee in-line on the output side of a sea strainer or sea pump. The paddle wheel sensor installs in the Tee and can be easily removed for inspection. The Raw Water Flow system consists of:
  • 2 5/8” panel mounted gauge with internal warning light
  • Bronze Tee
  • PCB board
  • Harness
  • Paddlewheel transducer

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 10-14 DAYS