25 Foot Nylon Hose Kit - Used with Mechanical Boost or Oil Pressure Senders & Gauges

2-Wire Xtreme Series Fuel Level Sender 6-60" Tank.

Of the many uncertainties that a boater faces often the largest is the accuracy of his fuel gauge The fuel sending unit's in a majority of production boats today use a simple float style design that in some instances, provides limited accuracy due to fuel slosh and the up and down bouncing of marine power boating If you have or are experiencing the symptoms we've got the answer for you, this double tube design measures the amount of air trapped between the tubes to accurately and precisely measure your current fuel load This design makes installation and calibration for use with 33-240 ohm gauges.

NOTE: These senders can only be trimmed to a minimum of 6". A shorter unit to as shallow as 3" can be special ordered for an additional fee. Call 800-225-9871 for details.

These senders will work for gasoline or diesel fuel.

3-Wire Xtreme Series Fuel Level Sender 6-60" Tank.

Of the many uncertainties that a boater faces often the largest is the accuracy of his fuel gauge The fuel sending unit's in a majority of production boats today use a simple float style design that in some instances, provides limited accuracy due to fuel slosh and the up and down bouncing of marine power boating If you have or are experiencing the symptoms we've got the answer for you, this double tube design measures the amount of air trapped between the tubes to accurately and precisely measure your current fuel load This design makes installation and calibration for use with 33-240 ohm gauges.

NOTE: These senders can only be trimmed to a minimum of 6". A shorter unit to as shallow as 3" can be special ordered for an additional fee. Call 800-225-9871 for details.

These senders will work with gasoline or diesel fuel.

Adjustable Float Type Fuel Level Sender

This is the most common type of fuel level sender in production style boatstoday. This is a 33-240 OHM sender. This sender is adjustable andcan be tailored to most fuel tanks.

Fixed Position Speedometer Pick-Up Kit - 1/4" Pitot Tube Assembly Kit, 5", 7" or 10"

This is a standard fixed position speedometer pick-up or pitot kit. Each kit comes complete with a stainless steel pitot tube and mount as well as the necessary fittings to connect your speedometer hose (sold separately) to your speedometer. Universal bolt pattern.

Fixed Position Speedometer Pick-Up Kit - 1/8" Pitot Tube Assembly Kit, 5", 7" or 10"

This is a standard fixed position speedometer pick-up or pitot kit. Each kit comes complete with a stainless steel pitot tube and mount as well as the necessary fittings to connect your speedometer hose (sold separately) to your speedometer. Universal bolt pattern.

Fuel Pressure Sender 0-100 PSI for Hardin Gauges

Fuel Pressure Sender 0-15 PSI for Hardin Gauges

GPS Stationary Receiver, 2-1/4" Diameter

Not included with speedometer heads. NMEA0183 compliant. Connect your existing GPS or purchase this high speed receiver from us.

Due to new product innovations, we now offer a no-battery antenna. It has been confirmed that these antennas will work on GPS speedometers with 3 stud terminals.

Older GPS antennas/receivers have a battery that needs to be replaced periodically. This battery holds startup satellite memory. The battery can last any where between 3 to 5 years depending on usage.

You will know when the antenna battery is dead by viewing the pointer on the speedometer. The pointer will stay at the 9 o’clock position, 6 o’clock position or it will sit at 0 MPH. Please do not attempt to replace the antenna battery yourself as it is very difficult and may lead to permanent damage to your antenna.

Installation Instructions

Oil Pressure Sender 0-80 PSI, Hardin Gauge, VDO, Medallion

Oil Temperature Sender 100-320° 1/8" NPT

Electric temperature senders feature a brass non-corrosive body for superior performance and accuracy Be sure to select the correct thread size for your application.

Pitot Kick-up Assembly, 1/8" or 1/4"

Ok, so you say you're tired of replacing speedometer pitot tubes that have been ripped off or mangled due to unforeseen floating or slightly submerged objects. Then here's one of the most cost effective upgrades we've seen. This stainless steel constructed pitot assembly has the ability to kick-up out of harms way when it has come in contact with a solid object.

Pitot Tube Standard - 5", 7" or 10"

These popular replacement pitot tubes will fit most stainless style speedometer pick-ups available today. These replacement pitot tubes are available in three popular sizes 5", 7", and 10" lengths. Keep a spare, you'll be glad you did.

Pitot Tube Fitting - 1/4" or 1/8" Hose

Universal Economy Speedometer Pick-up

This all plastic construction pitot tube assembly comes "tested" to 80 MPH Works great in mild pleasure boating environments The pick-up is designed to accept 1/8" pitot hose ONLY. Not recommended for high performance applications.

Universal Economy Speedometer Pick-up with 20ft hose

This all plastic construction pitot tube assembly comes "tested" to 80 MPH Works great in mild pleasure boating environments The pick-up is designed to accept 1/8" pitot hose ONLY. Not recommended for high performance applications.

Water Temperature Sender 100-240° 1/8", 1/4", 3/8" NPT

Electric temperature senders feature a brass non-corrosive body for superior performance and accuracy Be sure to select the correct thread size for your application.